Xerox 332 ST User guide

Brand: Xerox

Model: 332 ST

Type: User guide

dc04cc0327

Customer Support Page 1

Upgrade Procedure for NT

Enhanced Interface Drivers

Purpose

This document provides instructions for upgrading NT Enhanced Interface print drivers on

a Windows NT, 2000, XP or 2003 platform. These processes involve print drivers shared

from a server or local installs on workstations. You should have an intermediate level of

understanding of Windows operating systems and printer driver installation to perform

these procedures.

If you are planning an upgrade, please follow the procedure outlined in this document.

Upgrade Procedure for NT Enhanced Interface Drivers

Caution: To either upgrade or change the PDL of an NT Enhanced kernel mode driver,

DO NOT click New Driver (located on Advanced tab in Windows 2000/XP/2003) or New

Driver (located on the General tab in Windows NT) in the driver’s Properties in the

Printers folder! Doing so can result in driver and/or feature corruption or blue screens. NT

print drivers run at the kernel mode level. Because of this, driver corruption can lead to

operating system crashes. Please see the section “Background-Kernel Mode vs. User

Mode Drivers,” at the end of this document for more information.

These failures occur because the operating system locks dll files in memory. The

operating system does not release these files from memory when you use the New

Driver button, so that they do not update to the newer version. This can cause conflicts

between the new driver files and the old dll’s, still resident on the system. This procedure

outlines the recommended method to ensure all files are updated to the appropriate

version.

If you have attempted to upgrade an NT Enhanced Interface print driver and are now

experiencing failures, please see Customer Tip # dc00cc0115 Uninstalling Windows NT

4.0 and 2000/XP Printer Drivers located at www.xerox.com/documentcentrefamily/tips to

help correct these issues.

For each Document Centre print driver you wish to upgrade, we recommend that you

delete all printer objects associated with that print driver and reinstall a new driver. Follow

the same process to change a driver PDL (Printer Description Language) - PostScript to

PCL or PCL to PostScript.

If the driver(s) you delete are on a server in a PnP (Point n Print) environment, also

delete the print drivers from the workstations.

Xerox Multifunction Devices

Customer Tips

… for the use

Dc04cc0327

February 26, 2004

This document applies

to these Xerox

products:

WC Pro 32/40 Color

WC Pro 65/75/90

WC Pro 35/45/55

WC M35/M45/M55

x DC 555/545/535

x DC 490/480/470/460

x DC 440/432/425/420

x DC 332/340

x DC 265/255/240

x DC 220/230

DCCS 50

CAUTION: To either

upgrade or change the

PDL of an NT Enhanced

kernel mode driver, DO

NOT click New Driver

in the driver’s Properties

in the Printers folder!

dc04cc0327

Page 2 Customer Support

Deleting the Driver in Windows NT

1. Log on to the server or workstation as an administrator and close all applications.

2. Select [Start:Settings:Printers].

3. Right-click on the Document Centre printer object and click Delete.

4. Click Yes to confirm you want to delete the printer.

Note: delete all printer objects associated with that printer driver. Repeat steps 3 and

4 for any additional printer driver objects.

5. Reboot the workstation or server. Continue with the procedure in the section

“Reinstall the Deleted Printers.”

Deleting the Driver in Windows 2000, XP or 2003

1. Log on to the server or workstation as an administrator and close all applications.

2. Select [Start:Settings:Printers].

3. Right-click on the Document Centre printer object and click Delete.

4. Click Yes to confirm you want to delete the printer.

Note: delete all printer objects associated with that printer driver. Repeat steps 3 and

4 for any additional printer driver objects.

5. Click Start.

6. Select Run.

7. In the field type: cmd and click OK. A DOS window appears.

8. At the c: prompt type net stop spooler and press Enter. The print spooler closes

down.

9. At the c: prompt type net start spooler and press Enter. The print spooler restarts.

10. Close the DOS window.

11. Access the Printers folder and select [File>Server Properties].

12. Select the Drivers tab and click on the listing of the print object you just deleted.

13. Click Remove then click Close.

The driver is successfully deleted.

Reinstall the Deleted Printers

Caution: To either upgrade or change the PDL of an NT Enhanced kernel mode driver,

DO NOT click New Driver (located on Advanced tab in Windows 2000/XP/2003) or New

Driver (located on the General tab in Windows NT) in the driver’s Properties in the

Printers folder!

1. Access the Printers folder and open the Add Printer wizard.

2. Select the type of network, either Local printer or Network printer.

3. At the prompt to install the printer driver on your local machine, select Have Disk.

Browse to the location of your printer driver files and select the correct .INF file. Click

OK. Follow the instructions provided by the Add Printer Driver Wizard to complete

the installation.

Note: If you use the Add Printer Driver Wizard in a Windows NT server or

workstation environment and a prompt appears to replace or keep the existing driver,

always select Replace.

4. Specify if you want the Document Centre to be your default printer. Click Next.

5. Indicate if you want to print a test page. Click Next.

Note: Do not use the

delete procedures to

remove corrupted print

drivers. For uninstall

procedures please see

Customer Tip #

dc00cc0115 Uninstalling

Windows NT 4.0 and

2000/XP Printer Drivers.

dc04cc0327

Customer Support Page 3

6. Click Finish. The printer driver upgrade is now complete.

Configure the printer options you require in the printer Properties.

Background - Kernel Mode Drivers vs. User Mode (excerpt

taken from Microsoft Windows Printing Interoperability Abstract)

In Windows NT 4.0 all printer drivers run in kernel mode. The Windows printing

environment refers to these drivers as Version 2 drivers. For Windows 2000 and later

Microsoft moved to user mode drivers (called Version 3 drivers) for system reliability and

robustness. Windows 2000 and later environments support user mode drivers natively,

and kernel mode drivers solely for backward compatibility. A driver error that occurs in

kernel mode is able to crash the entire server, while the effect of an error in user mode is

restricted to the driver process, generally the spooler. Restarting the spooler is much

faster than rebooting the entire system, and allows other services on the server to

continue while the spooler is down.

Further information on kernel mode and user mode drivers can be found at the following

URL:

http://www.microsoft.com/windows2000/technologies/fileandprint/print/miginterop.asp

dc04cc0327

Page 4 Customer Support

Additional Information

Xerox Customer Service welcomes feedback on all documentation - send feedback via e-

mail to: USA.DSSC.Doc.Feedba[email protected]m.

You can reach Xerox Customer Support at 1-800-821-2797 (USA),

TTY 1-800-855-2880 or at http://www.xerox.com.

Other Tips about Xerox multifunction devices are available at the following URL:

http://www.xerox.com/DocumentCentreFamily/Tips.

XEROX ®, The Document Company ®, the digital X ®, and all Xerox product names are trademarks of XEROX

CORPORATION. Other trademarks belong to their respective owners.

Xerox 332 ST User guide

Xerox 332 ST User guide

Related papers

Other documents