Uniden DCT646 Series Quick Easy Steps Manual

Brand: Uniden

Model: DCT646 Series

Category: Telephones

Type: Quick Easy Steps Manual

This manual is also suitable for

DCT646-2 Series

(see back

,,q

_ iiiiiiiiiiiiiiiiiiiii,

),,,,,,,,,,,,,,,,,,,,,,,,,,,,

__J, ,,,

,,, _, _;t?' ,,,,,,,,,,,,,,I'

J,t , _,

_r÷:©

:III::IIII.....

,,,,,,,,,,,,,,,,,,,,,

Make sure your cord[ess phone's packaging includes the

fo[[owing items (the number of items may vary depending on

mode[ number within the series).

If any of these items are missing or damaged, contact the

Uniden Parts Department.

• Base Unit

• Handset(s)

• AC Adapter(s)

• Rechargeab[e Battery Pack(s)

• Telephone Cord

• Belt Clip(s)

• Owner's Manua[

• Other Printed Materia[s

Uniden Parts Department at (800) 554-3988

Hours: M-F 8:00 a.m. to 5:00 p.m. CST.

or visit our website at

www.uniden.com for replacement parts.

TO INSTALL THE HANDSET BATTERY

(see page 12 for detaits)

Charge the handset battery pack

for at least I5-20 hours before

using your new cordless telephone

for the first time! _/_/I

Use only the Uniden rechargeahle

battery pack supplied with your

new phone.

Remove the cover, z _J

Connect the battery pack BLA_,__y_,

connector with the correct

potarity and listen for a

dick to insure connection.

Replace the cover.

Use only the Uniden AC adapter

supplied with your new phone.

Ptug the AC adapter

cord into the base _ _'_r_:il

unit and thenintoa __i _/ /"[_

120V AC out[et.

Place the handset in :::

the base and charge _.o co_,_t

continuousty for _'°_ ..... _L.._

15 - 20 hours before

using the phone. ACadapter

(supplied}

www.uniden.¢om QUICK REFERENCE GUIDE [1]

When the handset battery pack is fu[[y charged (after 15-20

hours of charging), p[ug the telephone cord into the base unit

and then into a telephone wa[[jack.

Your phone is set for tone dialing. If your focal network

requires pulse dia[ing, p[ease see "D. Choose the dia[ing mode"

on page 15.

TO SET CALLERID ON CALLWAITING AND CALL

WAITING DELUXE

For a[[ Handset Menu Setup options, refer to page 21.

Press menu/del in standby mode.

Press rJllg//vol//A or rJllg//vol//v to select G i ,.-_,._i

V Set.ijF and then select/_.

Pressring/vol/^ or ring/vol/v to select _Z:][)_Z:_I[.i and

then select/_.

Press ring/vol/^ or ring/vol/v to select _Z:Jill_ I]__,"I]:_,i,I[)::,:_

,-,_- ,-.u ,-,_-....,-.ur.,v,-,-,'.z. or l':l.;i ljf'f'.."L:l._.IL.'.')'::ljf'" and

then select/_.

TO SET LANGUAGE

Press menu/del in standby mode.

Pressring/vol/^ or ring/vol/v to select Ha_idseti

Sef..ijp and then select/_.

Pressring/vol/^ or ring/vol/v to select Langu._ge

and then select/_.

Press rJng/vol/v to choose a language

and then select/_.

@@@@

[2] QUICK REFERENCE GUIDE www.uniden.com

Aseg0rese de que haya recibido los siguientes articu[os en e[

paquete ([a cantidad de articu[os puede variar dependiendo de[

n0mero de[ mode[o dentro de [a serie). Si a[guno de estos

articu[os fa[ta o est_ da_ado, comuniquese con e[ departamento

de partes de Uniden.

• Base

• Receptor(es)

• Adaptador(es) CA

• Paquete(s) de pi[as recargab[e(s)

• CaMe te[ef6nico

• Pinza(s) para [a correa

• Manual para e[ usuario

• Otros impresos

Uniden Parts Department |

Te[_fono: (800)554-3988 |

Horas: de Lunes a Viernes desde [as 8 a.m. hasta [as 5:00|

p.m., hora centra[ |

0 visitenos en nuestra p_gina Web en www.uniden.com |

para conseguir [as partes de reemp[azo. |

)

Para instalar la pila del receptor

(Consutte [a pSgina 12 para mSs detattes)

Cargue el paquete de baterfa to pila

par lo menos de 15 6 20 boras antes

de conectarlo a una lfnea telef6nica.

Use solamente el paquete de pilas

recargable de Uniden suministrado

con su nuevo tel_fono.

Quite [a tapa. _

Conecte e[ enchufe de[ Neg__ _._

paquete de [as pitas con [a

potaridad correcta y

escuche por un ctic para

asegurar [a conexi6n.

Reponga [a tapa.

Use solamente el adaptador CA

de Uniden suministrado con su

nuevo telEfono.

Conecte e[ cabte de[

Q adaptador CA [a base

Yde[Ueg°120v.enuna toma CA

Antes de usar e[ :::

tet6fono, co[oque e[ F_A_ _cA •

receptor en ta base y

AIOO

c_rgue[o continuamente Adoptodo,CA

por 15-20 horas. I_mi.io.odol

www.uniden.¢om Guia de referencia r_pida [3]

Cuando e[ paquete de pi[as de[ receptor est# tota[mente cargado,

despu#s de una carga de 15-20 horas, conecte e[ cable te[ef6nico

en [a base y [uego en e[ enchufe te[ef6nico de [a pared.

Su te[_fono est_ programado para marcar por tono. Si su red

local requiere [a marcaci6n por pu[so, por favor consu[te "D.

Se[ecci6n de[ modo de marcaci6n" en [a p_gina 15.

Para programar las opciones de identificaci6n

de llamadas de llamadas en espera y llamada en

espera de lujo

Para todas [as demos opciones de programaci6n en e[ menO,

consu[te [a p_gina 21.

O pri.ma yin,g_/.,vol,/_o ring/Ivol,/v para se[eccionar [a

r ._,_,.< .__,,_,u__,, [uego select/_.

Oprima ring/vol/A o ring/vol/v para se[eccionar

I] ] [)I]i.,i, y [uego select/_,

_ Oprima ring/roll^ o rring/vol/v para se[eccionar C:i.,i

Ac.t. y1-:i.,i[.'..% A,:.t., L:i.,.iA,:.t. YL:i.,i[.'..::.::APg, o L:i.,i AFg YI_-:i.,.i[:,%

AFg, y [uego select/_.

Para programar el lenguaje

Oprima menu/del en e[ modo de espera.

Oprima ring/Ivol/IA o ring/Ivol/Iv para se[eccionar [a

p r.c,gr. rec.eF.t.,:,.r., y [uego select/_.

_ Oprima ring/veil^ o ring/vol/v para se[eccionar e[

Le.rigua.Je, y [uego select/_.

Q Oprima ring/vol/v para escoger e[ [enguaje,

y [uego select/_.

menu/del en e[ modo de espera.

[4] Guia de referencia rfipida www.uniden.com

Contents

QUICK REFERENCE GUIDE

WELCOME/FEATURES/TERMINOLOGY

CONTROLS AND FUNCTIONS

DISPLAY AND ICONS

GETTING STARTED

Setting up the Phone

Mounting the Base Unit on a WaLl

About the Menu Options

Setting up the Menu

BASICS

Making and Receiving Calls

PLacing a CaLLon HoLd

RediaLing a CaLL

Adjusting the Handset Ringer, Earpiece and Speaker VoLume

Mute Microphone

Tone DiaLing Switch-over

TraveLing Out-of-Range

CLarity Booster

Privacy Mode

Find Handset

FLash and CaLLWaiting

Using One Touch Voice Mail Access

PHONEBOOK

Phonebook

Storing Phone Numbers, Names, Distinctive Rings,

and Speed Dial

Steps for Entering Names and Special Characters

Viewing the Phonebook

Making CaLLs Using the Phonebook

Speed DiaLing

Editing or Erasing a Stored Name,

Phone Number, Distinctive Ring, and Speed Dial

www.uniden.com

1 Chain DiaLing

6 CALLER ID

CaLLer ID and CIDCW (CaLLer ID on Cai[ Waiting)

8 Viewing the CaLLer ID List

10 DeLeting a CaLLer ID Message

Using the CaLLer ID Message List

11 CaLLWaiting DeLuxe Features

11 EXPANDING YOUR PHONE

16 Expanding Your Phone

18 Connecting the Charger

21 Register the Handset to the Base

28 Using the DirectLink Mode

28 Room Monitor

29 3-Way Conferencing

30 Intercom/Call Transfer Feature

31 RepLacing the Base

32 ADDITIONAL INFORMATION

32 Changing the Digital Security Code

32 InstaLling the BeLtc[ip

33 Headset Installation

Note on Power Sources

34 Maintenance

34 Genera[ Information

36 TROUBLESHOOTING

36 Liquid Damage

PRECAUTIONS & WARRANTY

38 I.C. NOTICE

40 INDEX

41 MEMORY LIST

[5]

Welcome

Congratulations on your purchase of the Uniden Multi-Handset Cordless System telephone. This

unit is different from conventional cordless telephones. When the base unit is connected to AC

power and a telephone line, it can support up to 4 handsets. Using extra handsets, you can

establish a 3-way conference ca[[ (2 handsets and an outside line), while two other handsets are

making an intercom ca[[. You can now place a fully featured cordless handset anywhere in your

home or office where AC power is available to connect the handset chargers.

Note: Some illustrations in this manual may differ from the actual unit for

explanation purposes.

_ s an Energy Star ® Partner, Uniden has determined that this product or product

models meets the Energy Star ® guidelines for energy efficiency.

Energy Star ® is a U.S. registered mark.

Note: Energy Star ® applies to DCT646 only.

Features • 2.4GHz Frequency Hopping Spread Spectrum

• 4 Multi-Handset Expandabi[ity

• Hands Free Speakerphonein the Handset

• Ca[[ Waiting Deluxe

• Caller ID/Ca[[er ID On Ca[[ Waiting

• 100 Dynamic Memory Location (Phonebook & Caller ID)

• Trilingual Handset Display Menus (English, French, and Spanish)

• Ca[[ Transfer between Handsets

• 20 Distinctive Ring Options (10 ringer tones and 10 melody ringers)

• Mute Feature

• Hash and Pause

• 88 Channe[Auto Scan

• DirectLink TM Mode

• Voice Mail Access

• Room Monitoring Feature

• Battery Level Indicator

• Clock Display

[6] WELCOME/FEATURES/TERMINOLOGY www.uniden.¢om

ThisseriesfeaturesincludeAutoTalk TM and AutoStandby TM. AutoTa[k allows you to answer a ca[[ by just removing

the handset from the cradle so you don't have to waste time pushing buttons. AutoStandby allows you to hang up by

simply returning the handset to the cradle.

To protect you against mis-bi[[ed ca[Is, which might result from your phone being activated by other equipment, this

series has Random Code TM digital security, which automatically selects one of over approx. 130,000 digital security

codes for the handset and base.

Frequency Hopping Spread Spectrum (FHSS) technology improves ca[ling range and clarity, and eliminates cross talk.

Because it rapidly changes transmission frequencies within the 2.4GHz bandwidth, this cordless phone helps reduce

the possibility of eavesdropping.

DirectLink mode is used when you have 2 or more handsets. You can use your handsets as transceivers.

Be sure to visit our web site: www.uniden.com

Uniden ® is a registered trademark of Uniden America Corporation.

AutoTa[k, AutoStandby, DirectLink, and Random Code are trademarks of Uniden America.

Terminology

• Standby Mode - The handset is not in use and talk/flash has not been pressed.

• Tatk Mode - The handset is not in the cradle and talk/flash or speaker has been pressed enabling a dial tone.

Taik appears on the display.

www.uniden.¢om WELCOME/FEATURES/TERMINOLOGY [7]

Controls & Functions

8 --

i. Handset Antenna

2. Headset Jack Cover

3. Be[tc[ip Hole

4. Hands-Free Speaker

5. Handset Battery Compartment

6. New Message LED

7. Handset Earpiece

8. LCD Display

9. Menu/del (de[ete) Key (P. 21 / P. 30, 42, 46)

10. (_ (ring)/vol(vo[ume)and^/v(P.31/P.21)

a. ringer and volume control b. scroll keys for display screen

11. _/tone/_- Key (P. 22 / P. 32 / P. 39)

12. _redial/pause Key (P. 30/P. 28)

13. _ speaker Key (P. 28)

14. Select/_ (voice mail) Key (P. 21 / P. 35)

15. Call id (Caller ID) key (P. 45)

16. End Key (P. 28)

17. Talk/flash Key (P. 28 / P. 34)

18. #/--> Key (P. 22 / P. 39)

19. _ (Phonebook) Key (P. 36)

20. Mold/transfer/int'com (Intercom) Key (P. 29 / P. 53 / P. 52)

21. Handset Microphone

22. Handset Charging Contacts

[8] CONTROLS & FUNCTIONS www.uniden.¢om

23.Base Antenna

24.Base Charging Contacts

25.Charge LED

26.Find handset Key (P. 34)

27.TEL LINE Jack

28.DC IN 9V Jack

29-

For DCT646-2 only

29.Charging Contacts

30.Charge LED

31.DC IN 9V Jack

www.uniden.com

CONTROLS & FUNCTIONS [9]

Display and Icons

Example of the standby mode display

:!ii;U i..i i 2 r, 0 0 i:::i Jk_ Day of the week and time / battery icon

i...ia r_,:::i2.eL. :i:i::i. _ Handset ID and Banner

i".i,iii,_.,._r, !5 .&:,:,H:_ Number of new Caller ID ca[Is received / Ringer off icon (when the ringer is Off)

ICON STATUS DESCRIPTION

Battery icons indicate the handset battery status. This icon cycles depending on

,,,::::JJJl,,::,i_il,.,,,i"),...,i"i Standby/Talk the battery status (empty, low, medium, and fuji).

.iii :Ui. i. Standby Ringer off icon indicates that ringer is turned off.

i;i:i Talk Mute icon appears when you mute the handset.

,,,,,

::'i[ Talk Speaker icon appears when the handset speaker phone is used.

"41

:.,,, Talk Booster icon appears when the Ctarity Booster feature is in use.

L, I

r:'i Talk Privacy icon appears when the Privacy lode is turned on.

[10] DISPLAY AND ICONS www.uniden.¢om

Setting up the Phone

Dothe fottowing steps:

A. Choose the best location.

B. Install the rechargeable battery pack into the handset.

C. Connect the base unit.

D. Choose the dialing mode.

A. Choose the best location

Before choosing a location for your new phone, read "Installation Considerations" on

page 61. Here are some important guidelines you should consider:

Avoid heat sources, such as

radiators, air ducts, and sunlight

Avoid noise sources such as a window

by a street with heavytraffic

Avoid television sets and

other electronic equipment

Avoid microwave ovens

Avoid excessive

moisture, extremely

[ow temperatures,

dust, mechanical

vibration, or shock

Choose a centra[ location

persona[ computers

Avoid other cordless telephones

If your home has

specially wired alarm

equipment connected to

the telephone line, be

sure that installing the

system does not disable

your alarm equipment.

If you have questions

about what will disable

alarm equipment,

contact your

telephone company or

a qualified installer.

www.uniden.¢om GETTING STARTED [11]

• Use ontythe

Uniden (BT-446)

rechargeabte

battery pack

supplied with your

cordless telephone.

• Rep[acement battery

packs are a[so

avaitab[e through the

Uniden Parts

Department at (800)

554-3988, Monday

thru Friday from 8:00

a.m. to 5:00 p.m. or

ontine at

www.uniden.com

B. Instat[ the rechargeabte battery pack into the handset

Charge the handset battery pack for at {east 15-20 hours before using your new cord{ess

tetephone for the first time! The handset is powered by a rechargeabte battery pack. The

battery recharges automaticatty when the handset is ptaced in the base unit. To maximize

the charge capacity of your battery pack, DO NOT ptug the tetephone cord into the base unit

and watt jack untit the battery is furry charged.

Press down on the handset battery case cover (use the finger

indention for a better grip) and stide the cover downward

to remove.

Ptug the battery pack connector (red & btack wires) into the

jack inside the battery compartment (the connector notches fit

into the grooves of the jack onty one-way). Match the wire

cotors to the potarity tabet in the battery compartment, connect

the battery, and tisten for a dick to insure connection.

3) Make sure you have a good connection by stightty putting on the BLACK"

battery wires. If the connection is secure, the battery jack witt

remain in ptace.

Ptacethe battery case cover back on the handset by stiding it

upwards untit it dicks into ptace.

Ptacethe handset in the base unit for 15-20 hours without

interruption. The base unit's LEDtight (tabeted charge)

ittuminates once the handset is ptaced in the base. The LEDtight

witt ittuminate whether the battery pack is connected or not.

If the base charge LEDtight does not ittuminate:

• Checkto see if the ACadapter is ptugged into the base unit and the etectricat watt outtet

property (use onty the supptied ACadapter. Do not use any other ACadapter).

• Checkto see if the handset is sitting correctty in the base and making good contact with

the base unit's charging contacts.

[12] GETTING STARTED www.uniden.¢om

Low battery alert

When the battery pack is very low and need to be charged, the phone is programmed to

eliminate functions in order to save power.

The battery pack needs to be charged when:

- The empty battery icon appears.

- L,:,_._B_tt.eP=.4appears in the display.

If the phone is in standby mode, none of keys will operate.

If you are on a ca[[, complete your conversation asquick[:/

as possible, and return the handset to the cradle.

L ,:::,b._Ei:aL.L.e i."::::_

C[eaning the battery charging contacts

To maintain a good charge, it is important to dean the

charging contacts on both the handset and the base unit

once a month. Using water only, dampen a cloth to

dean the charging contacts. Then make sure to go back

over the charging contacts with a dry cloth before

returning the handset to the base to charge.

Caution: Do not use paint thinner, benzene, alcohol, or

other chemical products. Doing so may discolor the surface

of the telephone and damage the finish.

Contacts

*Even when the battery

pack is not being used,

it will gradually

discharge over a long

period of time.

For optimum

performance, be sure

to return the handset

to the base unit after a

telephone ca[[.

*Standby Mode

The handset is not in

use and talk/flash

has not been pressed.

*Talk Mode -

The handset is not in

the cradle and talk//

flash or speaker has

been pressed enabling

adia[tone, iaLk

appears on the disp[ay.

www.uniden.com GETTING STARTED [13]

• Use only the supplied

LAD-800] AC adapter.

Do not use any other

AC adapter.

ePLace the power cord

so that it does not

create a trip hazard or

where it could

become chafed and

create a fire or

eLectricaL hazard.

C. Connect the base unit

1) Connect the AC adapter to the DC IN 9V jack and to a

standard 120V AC waLLoutlet.

2) Set the base on a desk or tabletop, and place the

handset in the base unit.

3) Make sure that the charge LEDilluminates.

If the LED does not illuminate, check to see that the AC adapter

is plugged in and the handset makes good contact with the base

charging contacts.

,Connect the AC adapter to a continuous power supply.

*PLace the base unit close to the AC outlet so that you can

unplug the AC adapter easily.

ACadapter

(supplied)

'ii

• After installing the battery pack in the handset, charge your handset at [east 15-20 hours

before plugging into the phone line.

4) Once the handset battery pack is fuLLy charged,

connect the telephone Line cord to the TEL LINE jack

and to a telephone outlet.

Q If your telephone outlet isn't modular, contact

your telephone company for assistance.

(supplied)

[14] GETTING STARTED www.uniden.com

D. Choose the diating mode

Most phone systems use tone dialing, which sends DTMF tones through the phone lines.

However some phone systems still use pulse dialing such as in rural areas. The default

setting is tone dialing. Depending on your dialing system, set the dial mode. To set the dial

mode, see "Setting the Dial Mode" on page 26.

• If you are not sure of your dialing system, set the unit to tone dialing. Make a trial ca[[.

If the ca[[ connects, leave the setting as is, otherwise set the unit to pulse dialing.

• If your phone system requires pulse dialing and you need to send DTMF tones in certain

situations during a ca[[, you may Switch Over to tone dialing (refer to "Tone Dialing

Switch-over" on page 32).

www.uniden.¢om GETTING STARTED [15]

DONOTuse an AC

out[et controt[ed by a

wa[[ switch.

Mounting the Base Unit on a Wall

Standard watt p[ate mounting

This phone can be mounted on any standard watt prate.

1) Rug the AC adapter into the DE IN 9V jack.

2) Wrap the AC adapter cord inside the mowed wiring

charmer as shown.

Wall plate

3) Rug the AC adapter into a standard 120V AC

watt outtet.

Rug the tetephone fine cord into the TELLINE jack.

Wrap the cord inside the motded wiring channe[

as shown.

Rug the tetephone fine cord into the

tetephone outtet.

AC outlet

6) Atign the mounting stots on the base with the

mounting posts on the watt. Then push in and down

unti[ the phone is firmty seated.

AC adapter

[16] GETTING STARTED www.uniden.¢om

Direct wa[[ mounting

If you don't have a standard wail plate, you can mount your phone directly to the wail.

Before doing this, consider the following:

• Avoid electrical cables, pipes, or other items behind the mounting location that could

cause a hazard when inserting screws into the wail

• Try to mount your phone within 5 feet of a working phone jack to avoid excessive lengths.

• Make sure the wail materia[is capable of supporting the weight of the base and handset.

• Use #10 screws (minimum length of 1-3/8 inches) with anchoring devices suitable for the

wail material where the base unit wi[[ be placed.

1) Insert two mounting screws into the wail (with their

appropriate anchoring device), 3-15/16 inches apart.

Allow about 1/8 of an inch between the wail and screw

heads for mounting the phone.

2) Refer to steps 1 through 6 on page 16 to mount

the telephone.

TOP

1=3/8 in.

in=

www.uniden.¢om GETTING STARTED [17]

During G[oba[ Setup and

System Reset, make sure

your cord[ess phone is

in standby mode (not in

use), and a[[ handsets

are within range of the

main base unit.

About the Menu Options

There are 5 main menu options, (DirectLink Mode, Room Monitor, Handset Setup, Gtobat

Setup and System Reset) and 16 submenu options.

Summary of Main Menu and Submenu Options

DirectLink Mode

DirectLink Mode arrows a pair of handsets to work without the base unit, for direct handset-

to-handset communication. Use them at sporting events or while shopping to stay in

contact with family members or friends. You must set the two handsets to DirectLink Mode

to utilize this feature.

Room Monitor

This feature only works if you have two or more handsets, allowing you to monitor sounds in

another room (see page 22 for setup). One handset is placed in the desired room to monitor

(acts as remote mic), and the other is placed near listener (remote speaker). This is useful

for monitoring child activities.

[18] GETTING STARTED www.uniden.¢om

Handset Setup

The foLLowing submenu options must be set separately for each handset.

Submenu option Description

Edit Voice Malt

Ringer Tones

(DefauLt is FLicker)

Distinct. Ring

(DefauLt is on)

AutoTa[k

(DefauLt is off)

Anykey Answer

(DefauLt is off)

Banner (True Banner)

Language

(DefauLt is EngLish)

Key Touch Tone

(DefauLt is on)

Program or delete the voice malt access number (see page 22).

Adjusting the ringer tone (tone your phone makes when ringing)

(see page 23).

Set the distinctive ring (see page 23). "Distinctive Ringer" a[[ows you to

_reset memory locations with a designated ring tone. When an incoming ca[[

is received and the Ca[[er ID information matches the information in one of

the memory locations, the distinctive ring that has been stored for that

_articu[ar Ca[[er wi[[ sound. If you have set multiple memory locations with

distinctive rings, switching the setting to "Distinctive Off" wi[[ resu[t in no

distinctive ringing. AL[ incoming ca[[s wi[[ have a normal ring tone.

Switching to "Distinctive On" wi[[ activate a[[ programmed distinctive ring

memory [ocations.

Allows you to answer the phone without pressing talk/flash or speaker.

When the AutoTa[k is set to on, simply remove the handset from the cradLe

and the phone automatically answers the ca[[ (see page 23).

A[[ows you to answer the phone without pressing talk/flcish or speaker.

When the Anykey Answer is on, you can answer a ca[[ by pressing any number

key, _/tone/<--, or #/3 on the handset (see page 24).

Customize your handset(s) by giving it a banner name. The name will be

displayed on the LCDscreen during standby mode, Intercom, Transfer, Room

Monitor and Copy Phonebook operation. The banner name will be displayed on

the receiving handset as we[[ (see page 24).

The menu display options can be set to EngLish, French or Spanish for easy

setup use (see page 24).

Allows you to set your phone's key touch-tone to on or off (tone your keypad

makes when keys are pressed) (see page 24).

www.uniden.¢om GETTING STARTED [19]

Page is loading ...

Uniden DCT646 Series Quick Easy Steps Manual

Brand: Uniden

Model: DCT646 Series

Category: Telephones

Type: Quick Easy Steps Manual

This manual is also suitable for

DCT646-2 Series

Download PDF

report

Uniden DCT646 Series Quick Easy Steps Manual

This manual is also suitable for

Uniden DCT646 Series Quick Easy Steps Manual

Related papers

Other documents