User Manual
Model: TBAB-26
© Dayton Audio®
daytonaudio.com
Expand your wireless Bluetooth experience with Dayton Audio TBAB-26 multi-pairing
Bluetooth amplifier board. Use it as a single stereo HiFi Bluetooth 5.0 2 x 6W amplifier
board, or add another board (sold separately) and pair them together for wireless left
and right channels.
Build two portable Bluetooth speakers with them and set them up to 30 ft. apart. Pair the
master board/speaker with your iPhone. Pair the master with the slave and enjoy left and
right stereo sound between the two boards/speakers. Some Android devices have a
media output function that enables you to have two Bluetooth boards/speakers paired at
the same time. With this option two masters and two slaves pair together for even more
Bluetooth wireless options.
2 x 6W TWS Pairing Bluetooth 5.0
Amplifier Board
Pairing Two Boards Together
1. Pair one board to your phone and play music through the board. This will be the
master board.
2. Press and hold down the button on the master board until it beeps.
3. Press and hold down the button on the second board until you here a chime tune. This
will be the slave board. Wait a few seconds and you'll hear your music playing through
both boards.
4. These boards will stay paired until you press and hold down the button on the slave
board to free it from the master board.
1 2 3
4
6
5
1. Bluetooth pairing/power indicator 4. Right speaker output
2. Twin pairing button 5. USB-C 5 VDC power input
3. Volume control 6. Left speaker output