Topeak TW002-1 Owner's manual

Type
Owner's manual

This manual is also suitable for

Topeak TW002-1 is a versatile tool that combines a bike repair stand with a weight scale, making it an ideal choice for cyclists who want to maintain and track the weight of their bikes. With its sturdy construction and adjustable height, the TW002-1 can accommodate a wide range of bikes, from road bikes to mountain bikes. The integrated weight scale allows users to accurately measure the weight of their bikes, which can be useful for tracking progress during weight-loss programs or ensuring that bikes are within weight limits for competitions.

Topeak TW002-1 is a versatile tool that combines a bike repair stand with a weight scale, making it an ideal choice for cyclists who want to maintain and track the weight of their bikes. With its sturdy construction and adjustable height, the TW002-1 can accommodate a wide range of bikes, from road bikes to mountain bikes. The integrated weight scale allows users to accurately measure the weight of their bikes, which can be useful for tracking progress during weight-loss programs or ensuring that bikes are within weight limits for competitions.

PREPSTAND PRO
WEIGHT SCALE
Art no. TW001-1
Art no. TWSC01
GB
PREPSTAND ELITE
Art no. TW002-1
User's Guide
PREPSTAND SERIES
REPAIR & STORAGE SOLUTIONS01 PREPSTAND SERIES
1. 360˚ Rotation Knob
2. Small Parts Box
3. Clamp Jaws
4. Clamp Knob
5. Main Unit
5a. Clamp Arm
5b. Clamp Lever
6. Folding Knob
7. Extension Tube
8. QR Clamp Lever
9. Air Cushion Valve
10. Support Leg Assembly
DETAILED PARTS DESCRIPTION
TABLE OF CONTENTS
PREPSTAND ELITE
03-04 : ASSEMBLY
03 : SUPPORT LEG ASSEMBLY
04 : MAIN UNIT ASSEMBLY
05 : ADJUSTMENT
05 : CLAMP STRENGTH ON EXTENSION TUBE
AND CLAMP JAW ADJUSTMENT
05 : ROTATION ADJUSTMENT
06 : SMALL PARTS BOX
06 : SMALL PARTS BOX OPERATION
08-10 : DISASSEMBLY
08 : ROTATE CLAMP ARM TO HORIZONTAL
POSITION
08 : CLOSE CLAMP JAWS
09 : FOLD MAIN UNIT
10 : FOLD SUPPORT LEG ASSEMBLY
06 : PREPSTAND PRO (WITH WEIGHT SCALE)
06 : WEIGHT MEASUREMENT
05-07 : WEIGHT SCALE
05 : CONVERT SMALL PARTS BOX TO WEIGHT SCALE
07 : QUICK START MANUAL
07 : CHANGE BATTERY
5
5a 5b
8
10
9
6
7
1
23
4
REPAIR & STORAGE SOLUTIONS
PREPSTAND SERIES
SUPPORT LEG ASSEMBLY
ASSEMBLY
PREPSTAND ELITE
NOTE:
Always fully expand support leg
assembly for a steady foundation.
5mm
Allen Key
Clamp strength
adjustment
02
REPAIR & STORAGE SOLUTIONS PREPSTAND SERIES
MAIN UNIT ASSEMBLY
NOTE:
Always make sure folding knob
is securely tightened.
ASSEMBLY
Folding Knob
03
REPAIR & STORAGE SOLUTIONS
PREPSTAND SERIES
CLAMP STRENGTH ON EXTENSION TUBE AND CLAMP JAW ADJUSTMENT
ROTATION ADJUSTMENT
ADJUSTMENT
Clamp strength
on extension tube
adjustment
Clamp
Lever
NOTE:
Always make sure small
parts box is locked before
rotating main unit.
ADJUSTMENT
NOTE:
Always make sure clamp
arm is securely tightened
after rotating.
Tighten the clamp lever
carefully. Over-tightening may
cause damage to your bike.
CAUTION
CLICK
04
5mm
Allen
Key
REPAIR & STORAGE SOLUTIONS PREPSTAND SERIES
SMALL PARTS BOX
CONVERT SMALL PARTS BOX TO WEIGHT SCALE
SMALL PARTS BOX OPERATION
WEIGHT SCALE
NOTE:
Always make sure small
parts box is locked before
rotating main unit.
05
REPAIR & STORAGE SOLUTIONS
PREPSTAND SERIES
PREPSTAND WITH WEIGHT SCALE
PREPSTAND PRO (WITH WEIGHT SCALE)
WEIGHT MEASUREMENT
NOTE:
In order to weigh accurately, support
leg assembly should be on flat ground
and weight scale facing up in vertical
position. Make sure item being weighed
is not touching Prepstand.
06
REPAIR & STORAGE SOLUTIONS PREPSTAND SERIES
QUICK START MANUAL
WEIGHT SCALE
CHANGING BATTERIES (CR2032 x 2 pcs)
1. Open battery cover.
2. Replace batteries. Be sure positive and
negative side of batteries are inserted correctly
when replacing.
Size: (L x W x H)
5.4" x 2.5" x 1"
Weight: 240 g
lb
Kg
Scale
Display screen
On/Off/Reset
Unit selection
(Screws -
M4 x 0.7mm x L20
Supplied)
Screw Holes
(Screws -
M4 x 0.7mm x L20
Supplied)
Screw Holes
lb
Kg
Ready to weigh/
weight completed
indicator
Negative indicator
Low battery indicator Digital display screen
Measured data from the
Topeak weight scale is for
personal reference only
and should not be used for
commercial purposes.
BE AWARE
Weight units
On Press
Off Press and hold for 3 seconds.
Unit Selection Press kg lb
Reset Press when unit is on.
Auto-off Display screen will shut off automatically after 3 minutes of inactivity.
OPERATION:
NOTE:
Maximum weight capacity is 25 kg (55 lb), accuracy tolerance: 20 g
07
REPAIR & STORAGE SOLUTIONS
PREPSTAND SERIES
DISASSEMBLY
DISASSEMBLY
CLICK
ROTATE CLAMP ARM TO HORIZONTAL POSITION
CLOSE CLAMP JAWS
PREPSTAND ELITE
08
REPAIR & STORAGE SOLUTIONS PREPSTAND SERIES
FOLD MAIN UNIT
DISASSEMBLY
Always use both hands to
fold down main unit,
otherwise main unit might hit
your fingers and cause injury.
CAUTION
09
REPAIR & STORAGE SOLUTIONS
PREPSTAND SERIES
FOLD SUPPORT LEG ASSEMBLY
DISASSEMBLY
10
IMPORTANT
1. Always fully expand support leg assembly for a steady foundation.
2. Always make sure folding knob is securely tightened.
3. Always make sure clamp arm is securely tightened after rotating.
4. Always make sure small parts box is locked before rotating main unit.
5. Tighten the clamp lever carefully. Over-tightening may cause damage to
your bike.
6. In order to weigh accurately, support leg assembly should be on flat
ground and weight scale is facing up in vertical position. Make sure item
being weighed is not touching the Prepstand.
7. The Weight Scale is water resistant, however, care should be taken when
used in wet environments. The Weight Scale should never be submerged
in water.
8. When cleaning the Weight Scale, use only a damp cloth to remove excess
dirt. Never use compressed air to clean the Weight Scale.
9. Always use both hands to fold down main unit, otherwise main unit might
hit your fingers and cause injury.
10. Always make sure the 360˚ rotation knob and folding knob are
securely tightened when mounting bike.
11. When releasing clamp jaws to remove bike, hold bike to prevent
it from falling.
12. When setting up bike, make sure QR clamp levers are tightened.
13. Keep main unit parallel with one of the support legs for stability.
14. Both PrepStand Elite and PreStand Pro are equipped with air
cushion valve. (see detailed parts description) It allows extension
tube to slide down smoothly when adjusting height or disassembling.
Main Unit
Support Legs
WARRANTY
M-TW001-GB 09/15
2-year Warranty: All mechanical components against manufacturer defects only.
1-year Warranty: All electronic components (weight scale) against manufacturer defects only. Batteries are not covered under any implied warranty.
Warranty Claim Requirements
To obtain warranty service, you must have your original sales receipt. Items returned without a sales receipt will assume that the warranty begins
on the date of manufacture. All warranties will be void if the product is damaged due to user crash, abuse, system alteration, modification, or used in
any way not intended as described in this manual.
* The specifications and design are subject to change without notice.
Please contact your Topeak dealer with any questions.
For USA customer service call : 1-800-250-3068
www.topeak.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

Topeak TW002-1 Owner's manual

Type
Owner's manual
This manual is also suitable for

Topeak TW002-1 is a versatile tool that combines a bike repair stand with a weight scale, making it an ideal choice for cyclists who want to maintain and track the weight of their bikes. With its sturdy construction and adjustable height, the TW002-1 can accommodate a wide range of bikes, from road bikes to mountain bikes. The integrated weight scale allows users to accurately measure the weight of their bikes, which can be useful for tracking progress during weight-loss programs or ensuring that bikes are within weight limits for competitions.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI