Sunricher SR-2702B User manual

Brand: Sunricher

Model: SR-2702B

Type: User manual

DALI Switch 09.272BE.04706

Input Voltage Remarks

Output

Current

12-36VDC Constant voltage

3x(96-288)W

3x8A

Output

Power

Function introduction

Product Data

Size(LxWxH)

170x59x29mm

• DO NOT install with power applied to device.

• DO NOT expose the device to moisture.

Safety & Warnings

Operation

Common Anode Output(-)

Important: Read All Instructions Prior to Installation

Wiring Diagram

DALI Switch

0-6 0-9

Manual set button

Digital display

2 groups DALI

signal input & output

• Match all DALI system in the market

• Manual /automatically DALI address setting

• DALI address digital indicate

• 3 DALI address, 3channels DC output

• Waterproof grade:IP20

Set DALI Address Manually Via Buttons

3 DALI addresses for 3 output channels can be set via buttons:

1.1. Press and hold down any of the two buttons until numeric digital display flashes, then release

the button.

1.2. Click any of the two buttons once to select a digit, click again to change the digit until the

desired DALI address appears. Click first button to set “tens” position and second button to set

“units” position. The address can be set from 00~63.

1.3. Then press and hold down any of the 2 buttons until the numeric digital display stops flashing

to confirm the setting.

Note: this device occupies 3 DALI addresses for 3 output channels, for example, if the address is

set as 01, then address of channel 1 will be 01, address of channel 2 will be 02 and address of

channel 3 will be 03.

Note: DALI address can be manually assigned from 00-63-FF, by factory defaults, no DALI

address is assigned for the switch, and the display shows . Setting DALI address as

will reset the switch to factory defaults.

DALI Address Assigned by DALI Masters

DALI address can also be assigned by DALI Master controller automatically, please refer to user manuals of

compatible DALI Masters for specific operations.

Note: The digital display will show When the DALI master is assigning addresses.

The DALI master controllers can only do switching ON/OFF operation to this device.

OUTPUT

OUT1

OUT2

OUT3

GND

DC INPUT

12/36V DC

V+

V-

D 1

D 2

D 1

D 2

CH 1 output(+)

CH 2 output(+)

CH 3 output(+)

12-36V

DC Power Input

V- V-

V+ V+ Connect with S ingle Color LED

AC Power

50/60Hz

V+

V-

OUTPUT

INPUT

12V/24V/36V

CV PSU

DALI

Master DALI Switch

0-6 0 -9

OUTPU T

OUT 1

OUT 2

OUT 3

GND

DC INPU T

12/ 36V DC

V+

V-

D 1

D 2

D 1

D 2

V- V-

V+ V+ Connect with S ingle Color LED

DALI Switch

0-6 0 -9

OUTPU T

OUT 1

OUT 2

OUT 3

GND

DC INPU T

12/ 36V DC

V+

V-

D 1

D 2

D 1

D 2

V- V-

V+ V+ Connect with S ingle Color LED

DALI Switch

0-6 0 -9

OUTPU T

OUT 1

OUT 2

OUT 3

GND

DC INPU T

12/ 36V DC

V+

V-

D 1

D 2

D 1

D 2

Sunricher SR-2702B User manual

Sunricher SR-2702B User manual

Sunricher SR-2702B User manual

Related papers

Other documents