Pro-Lift F-2332 is a 2-ton capacity floor jack, designed to lift, but not support, one end of a vehicle. It features a lifting arm, carrying handle, cover plate, handle sleeve, saddle, release valve, rear caster, front wheel, and handle grip. The jack is compatible with vehicles whose lift points are compatible with the saddle of this jack. It is essential to use the jack only on hard, level surfaces and to immediately support the vehicle with appropriate means after lifting. The jack should never be used to move or dolly the vehicle.
Pro-Lift F-2332 is a 2-ton capacity floor jack, designed to lift, but not support, one end of a vehicle. It features a lifting arm, carrying handle, cover plate, handle sleeve, saddle, release valve, rear caster, front wheel, and handle grip. The jack is compatible with vehicles whose lift points are compatible with the saddle of this jack. It is essential to use the jack only on hard, level surfaces and to immediately support the vehicle with appropriate means after lifting. The jack should never be used to move or dolly the vehicle.
Pro-Lift F-2332 is a 2-ton capacity floor jack, designed to lift, but not support, one end of a vehicle. It features a lifting arm, carrying handle, cover plate, handle sleeve, saddle, release valve, rear caster, front wheel, and handle grip. The jack is compatible with vehicles whose lift points are compatible with the saddle of this jack. It is essential to use the jack only on hard, level surfaces and to immediately support the vehicle with appropriate means after lifting. The jack should never be used to move or dolly the vehicle.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI