TYCON Solar TPSK12/24M-170W, TPSK12/24M-340W User guide

Hello! I've reviewed the instruction sheet for the TYCON Solar TPSK series solar kits. This document outlines how to assemble the solar panel, set the correct tilt angle, and wire the panels to the solar controller, which is designed for 12V or 24V systems. I'm here to help answer any questions you have about the document or the installation process.
What is the recommended tilt angle for the solar panel?

How do I mount the solar panel?

What voltage are the solar kits compatible with?

8000041 Rev 3 TPSK Instrucon Sheet

1. Assemble the solar panel mount and set the correct lt angle based on your Latude. There is a useful tool to calculate

opmum angle at hp://tyconpower.com If you will be using a xed angle all year we recommend using the opmum angle

for winter sun. Mount the solar panel mount to the pole using hose clamps provided. You can also mount the panel to a wall

using lag bolts.

2. Aach the solar panel to the solar panel mount. For mulple panel assemblies mount the panels so that the wire juncon

box is towards the top or side. Wire the Solar Panels (see below for TPSK12/24-140/160W and TPSK12/24-280/320W

3. Wire the solar panels to the solar controller. TPSK solar kits are shipped with a solar controller that will auto select for the

correct voltage. The 12/24V 20A capacity controller is designed specically for 12V or 24V baery systems.

TPSK

Solar Kits