Garden Oasis Saratoga 7 PC Dining Set Owner's manual

Type
Owner's manual
OWNERS
MANUAL
Date of purchase: _____/ _____/ _____
Saratoga 7 PC
Dining Set
Product code: D71 M80190
UPC code: 7-6945575838-5
1
Vendor Item: SS-J-251-1NR/6
PARTS
Read through all the instructions before beginning assembly. Unpack and identify all the parts.
Place them on a flat, non-abrasive surface. Assembly by two people is recommended.
B (6)
Sling Seat And
Back
ACCESSORIES
Ga (4)
Medium Bolt
Gb (12 + 1 spare)
Short Bolt
Gd (36 + 2 spares)
Small Metal Washer
Gh (4)
Large Nut
2
C (2)
Rocker Frame
Gi (2)
Allen Wrench
Gg (12 + 1 spare)
Small Nut
E (2)
Rocker Base
Ge (4)
Lock Wahser
Gl (1)
Assembly
Instructions Sheet
D (2)
T Shaped
Connector
F (2)
Center Post
A (4)
Chair Frame
Gc (12 + 1 spare)
Long Bolt
Gf (4)
Large Metal Washer
Gk (1)
Open Hex Wrench
Gj (1)
Hex Wrench
ASSEMBLY INSTRUCTIONS
Attach the T shaped connector (D) to the
assembled chair frame (B&C). Place chair
frame upside down on your non-abrasive
work surface, from downside insert a medium
bolt (Ga) through a lock washer (Ge), through
the rocker frame (B&C), through the connector (D)
through a large metal washer (Gf) and secure
with a large nut (Gh) for each hole. See Fig. 3.
Securely tighten the bolts.
1
2
3
3
ROCKER ASSEMBLY
Fig. 1
Fig. 2
Fig. 3
Place the sling seat and back (B) and the
rocker frame (C) on a flat surface. Align
the holes, from outside insert a long
bolt (Gc) through a small metal washer (Gd),
through the front crossbar of rocker
frame (C), through the crossbar of seat
and back (B), through another small metal
washer (Gd) and secure with a small nut (Gg).
See Fig. 1. Do not tighten completely.
Repeat procedure for the other side.
Turn over the rocker frame (B&C). Line
up the holes, insert a short bolt (Gb)
through a small metal washer (Gd), through
the sling seat and back (B) and secure into
the rocker frame (C). See Fig. 2. Do not
tighten completely. Repeat procedure for
the other side. Securely tighten all bolts.
Gc
Gd
Gd
Gg
B
C
D
C
B
Gf
Gh
Ga
Ge
D
Gd
Gb
Align the connector of the assembled
rocker seat with the hole in center post
and push the rocker seat down firmly
until fully engaged. See Fig. 5.
Place the rocker base (E) on a flat surface,
and insert the center post (F) into the
hole located at the center of the base (E).
See Fig. 4. Push the center post (F)
down firmly and twist it left and right
as necessary.
Repeat procedure for the other rocker.
Fig. 5
Fig. 4
4
Fig. 6
4
5
6
SLING CHAIR ASSEMBLY
7
Attach the sling seat and back (B) to the
chair frame (A) Align the holes, from
outside insert a long bolt (Gc) through a
small metal washer (Gd), through the front
crossbar of chair frame (A), through the
crossbar of sling seat and back (B),
through another small metal washer (Gd) and
secure with a small nut (Gg). See Fig. 6. Do
not tighten completely. Repeat procedure
for the other side.
Gg
Gd
A
Gd
Gc
B
A
E
F
CARE INSTRUCTIONS
Wash with a mild solution of soap and water; rinse thoroughly. Dry completely. Do not use bleach or solvents.
Cover furniture with outdoor furniture covers when not in use.
Made in CHINA
Distributed by Sears, Roebuck and Co., Hoffman Estates, IL 60179
See our extensive assortment of outdoor living products
on-line at www.sears.com and www.kmart.com
For questions or comments about product:
Call toll-free:
800-457-4652
Please refer to part numbers when reordering
Your sling chairs and rockers are now ready to use.
Turn over the chair frame. Line up the
holes and insert a short bolt (Gb)
through a small metal washer (Gd), through
the sling seat and back (B), secure into
the chair frame (A). See Fig. 7. Do not
tighten completely. Repeat procedure
for the other side.
8
Securely tighten all bolts by using the
all wrenches (Gi,Gj,Gk) provided. Repeat
procedure for the remaining 3 chairs.
9
5
Fig. 7
Gd
B
Gb
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

Garden Oasis Saratoga 7 PC Dining Set Owner's manual

Type
Owner's manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI