Tyan GT24 B8212 User manual

1

http://www.tyan.com

TYAN GT24

B8212

Service Engineer’s Manual

2

http://www.tyan.com

3

http://www.tyan.com

PREFACE

Copyright

This publication, including all photographs, illustrations, and software, is

Neither this manual, nor any material contained herein, may be reproduced

without written consent of manufacturer.

TYAN

®

is a registered trademark of MiTAC International Corporation.

Version 1.00

Disclaimer

Information contained in this document is furnished by MiTAC International

Corporation and has been reviewed for accuracy and reliability prior to

printing. MiTAC assumes no liability whatsoever, and disclaims any

express or implied warranty, relating to sale and/or use of TYAN

®

products

including liability or warranties relating to fitness for a particular purpose or

merchantability. MiTAC retains the right to make changes to produce

descriptions and/or specifications at any time, without notice. In no event

will MiTAC be held liable for any direct or indirect, incidental or

consequential damage, loss of use, loss of data or other malady resulting

from errors or inaccuracies of information contained in this document.

Trademark Recognition

All registered and unregistered trademarks and company names

contained in this manual are property of their respective owners including,

but not limited to the following.

TYAN

®

is a trademark of MiTAC International Corporation.

AMD

®

is a trademark of AMD

®

Corporation.

AMI

®

, AMIBIOS

®

and combinations thereof are trademarks of AMI

Technologies.

Microsoft

®

, Windows

®

are trademarks of Microsoft Corporation.

IBM

®

, PC

®

, AT

®

and PS/2

®

are trademarks of IBM Corporation.

Winbond

®

is a trademark of Winbond Electronics Corporation.

4

http://www.tyan.com

Federal Communication Commission (FCC)

Notice for the USA

Compliance Information Statement (Declaration of

Conformity Procedure) DoC FCC Part 15: This

device complies with part 15 of the FCC Rules

Operation is subject to the following conditions:

1) This device may not cause harmful interference;

2) This device must accept any interference received including

interference that may cause undesired operation. If this equipment

does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the

user is encouraged to try one or more of the following measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and the receiver.

– Plug the equipment into an outlet on a circuit different from that of

the receiver.

Consult the dealer on an experienced radio/television technician for

help.

Notice for Canada

This apparatus complies with the Class A limits for radio interference as

specified in the Canadian Department of Communications Radio

Interference Regulations. (Cet appareil est conforme aux norms de

Classe A d’interference radio tel que specifie par le Ministere Canadien

des Communications dans les reglements d’ineteference radio.)

Notice for Europe (CE Mark)

This product is in conformity with the Council

Directive 89/336/EEC, 92/31/EEC (EMC).

CAUTION: Lithium battery included with this board. Do not puncture,

mutilate, or dispose of battery in fire. There will be danger of explosion if

battery is incorrectly replaced. Replace only with the same or equivalent

type recommended by manufacturer. Dispose of used battery according

to manufacturer instructions and in accordance with your local

regulations.

5

http://www.tyan.com

About this Manual

This manual provides you with instructions on installing your TYAN

GT24-B8212. This Manual is intended for experienced users and

integrators with hardware knowledge of personal computers.

This manual consists of the following parts:

Chapter1:

Provides an introduction to the TYAN GT24-B8212

barebones, standard parts list, describes the external

components, gives a table of key components, and

provides block diagram of the system.

Chapter2:

Covers procedures on installing the CPU, memory

modules and hard drives.

Chapter3:

Covers removal and replacement procedures for

pre-installed components.

Appendix:

List the cable connection and FRU part tables for

reference of system setup, and technical support

in

case a problem arises with your system.

For information on the motherboard, please refer to the

attached motherboard user’s manual. You can find the detailed

description about jumper and BIOS settings from the

motherboard manual.

6

http://www.tyan.com

SAFETY INFORMATION

Before installing and using TYAN GT24-B8212, take note of the following

precautions:

·Read all instructions carefully.

·Do not place the unit on an unstable surface, cart, or stand.

·Do not block the slots and opening on the unit, which are provided for

ventilation.

·Only use the power source indicated on the marking label. If you are not

sure, contact the power company.

·The unit uses a three-wire ground cable, which is equipped with a third

pin to ground the unit and prevent electric shock. Do not defeat the

purpose of this pin. If you outlet does not support this kind of plug,

contact your electrician to replace your obsolete outlet.

·Do not place anything on the power cord. Place the power cord where it

will not be in the way of foot traffic.

·Follow all warnings and cautions in this manual and on the unit case.

·Do not push objects in the ventilation slots as they may touch high

voltage components and result in shock and damage to the

components.

·When replacing parts, ensure that you use parts specified by the

manufacturer.

·When service or repairs have been done, perform routine safety checks

to verify that the system is operating correctly.

·Avoid using the system near water, in direct sunlight, or near a heating

device.

·Cover the unit when not in use.

7

http://www.tyan.com

Table of Contents

Chapter 1: Overview.........................................................................9

1.1 About the TYAN GT24-B8212..................................................9

1.2 Product Models.........................................................................9

1.3 Features..................................................................................10

1.4 Standard Parts List.................................................................17

1.4.1 Box Contents...................................................................17

1.4.2 Accessories .....................................................................18

1.6 About the Product...................................................................19

1.6.1 System Front View...........................................................19

6.2 System Rear View..............................................................19

1.6.3 LED Definitions................................................................20

1.6.4 Motherboard (S8212) Layout...........................................22

1.6.5 Jumpers & Connectors....................................................23

1.6.6 System Block Diagram....................................................24

1.6.7 Internal View....................................................................25

Chapter 2: Setting Up.....................................................................27

2.0.1 Before you Begin.............................................................27

2.0.2 Work Area........................................................................27

2.0.3 Tools................................................................................27

2.0.4 Precautions......................................................................28

2.1 Installing Motherboard Components.......................................29

2.1.1 Removing the Chassis Cover..........................................29

2.1.2 Installing the CPU and Heatsink......................................30

2.1.3 Installing the Memory.......................................................34

2.1.4 Installing Hard Drives.......................................................37

2.1.5 Installing the PCI-E Cards...............................................39

2.2 Rack Mounting........................................................................41

2.2.1 Installing the Server in a Rack.........................................41

8

http://www.tyan.com

2.2.2 Installing the inner Rails to the Chassis...........................42

2.2.3 Installing the Outer Rails to the Rack..............................43

2.2.4 Rack mounting the Server...............................................45

Chapter 3: Replacing Pre-Installed Components ........................ 47

3.1 Introduction.............................................................................47

3.2 Disassembly Flowchart...........................................................47

3.3 Removing the Cover...............................................................49

3.4 Replacing Motherboard Components.....................................49

3.4.1 Replacing Expansion Card..............................................49

3.4.2 Disconnecting All Motherboard Cables ...........................50

3.4.3 Removing the Motherboard.............................................51

3.5 Replacing the Slim DVD-ROM (optional)..............................52

3.6 Replacing the LED Control Board.........................................54

3.6.1 M1008 LED Control Board Features...............................56

3.6.2 M1008 LED Control Board Connector Pin Definition ......56

3.7 Replacing the System Fan....................................................57

3.8 Replacing the M1232 HDD Backplane.................................61

3.8.1 M1232 HDD Backplane Features....................................64

3.8.2 M1232 HDD Backplane Connector Pin Definitions.........66

3.9 Replacing the Power Supply.................................................68

Appendix I: Cable Connection Tables .......................................... 71

Appendix II: FRU Parts Table ........................................................75

Appendix III: Technical Support....................................................77

9

http://www.tyan.com

Chapter 1: Overview

1.1 About the TYAN GT24-B8212

Congratulations on your purchase of the TYAN

®

GT24-B8212, a highly

optimized rack-mountable barebone system. GT24-B8212 is designed to

support dual AMD

®

45nm Quad-Core Opteron 2300/2400 Series processors

(Barcelona / Shanghai / Istanbul) and up to 128GB DDR3-800/1066/1333

memory, providing a rich feature set and incredible performance. Leveraging

advanced technology from Intel

®

, GT24-B8212 server system is capable of

offering scalable 32 and 64-bit computing, high bandwidth memory design, and

lightning-fast PCI-E bus implementtation.GT24-B8212 not only empowers your

company in nowadays IT demand but also offers a smooth path for future

application usage.

TYAN

®

is also proud to deliver GT24-B8212 in flavor while supporting up to four

hot-swap hard drives and one optional slim SATA DVD ROM. GT24-B8212 uses

TYAN

®

’s latest chassis featuring a robust structure and a solid mechanical

enclosure. All of this provides GT24-B8212 the power and flexibility to meet the

needs of nowadays server application.

1.2 Product Models

Model HDD Bays Power supply

GT24-B8212

Hot-swap, 4 HDDs

600 Watts PSU

10

http://www.tyan.com

1.3 Features

B8212G24W4H-LE

Form Factor 1U Rackmount

Chassis Model GT24

Dimension (D x W x

H)

25.4" x 17.2" x 1.72" (645 x 436 x 43.6mm)

Motherboard S8212WGM3NR-LE

Board Dimension EATX, 12"x13" (305x330mm)

System

Gross Weight 16 kg

Buttons (1) RST / (1) NMI / (1) ID / (1) PWR w/ LED

LEDs (1) HDD / (1) ID / (1) Warning / (3) LAN / (1) Reserved

Front Panel

I/O Ports (2) USB ports

Type / Q'ty 3.5" Hot-Swap / (4)

External Drive

Bay

Supported HDD

Interface

SAS 3.0Gb/s / SATA-II 3.0Gb/s

System Cooling

Configuration

FAN (3) 40x28mm Fans + (2) 40x56mm Fans

Peripherals Type of ODD / Q'ty Slim-type DVD-ROM / (1) optional

Type EPS1U

Input Range Full-range AC(100-240V)

Frequency 47 - 63 Hertz

Output Watts 600 Watts

Power Supply

Efficiency PFC / 80-plus

Supported CPU

Series

AMD 45nm Quad-Core Opteron 2300/2400 Series

Processors (Barcelona / Shanghai / Istanbul) / Support

AMD Dual Dynamic Power Management (DDPM) feature /

Support AMD HyperTransport (HT1 and HT3) Technology

Processor

Socket Type / Q'ty LGA 1207-pin / (2)

11

http://www.tyan.com

Average CPU Power

(ACP) wattage

Up to 75W

CPU list Please visit our web site for the latest update.

System Bus Up to 6.4 GT/s Hyper-Transport link support

Chipset AMD SR5670 + SP5100

Chipset

Super I/O Winbond W83627

Supported DIMM Qty

(8)+(8) DIMM slots

DIMM Type / Speed Registered ECC DDR2 / 800/667/533

Capacity Up to 128GB

Memory channel 2 Channels per CPU

Memory

Memory voltage 1.8V

PCI-E (1) PCI-E Gen.2 x16 slot

Note: Support full height add-on cards

Expansion Slots

Pre-install TYAN

Riser Card

M2091, PCI-E x16 1U riser card (left)

Port Q'ty (3)

LAN

Controller Intel 82574L / Intel 82575

Connector type D-Sub 15-pin

Resolution 1600x1200@60Hz

Graphic

Chipset Aspeed AST2050

USB (6) ports (2 at front, 2 at rear and 2 Type A onboard)

COM (1) DB-9 COM port

PS/2 (1) PS/2 connector (for Keyboard and Mouse)

VGA (1) D-Sub 15-pin port

RJ-45 (3) ports

I/O Ports

SAS (8) SAS connectors

System Chipset Winbond W83793G

12

http://www.tyan.com

Voltage Monitors voltage for CPU, memory, chipset & power supply

Temperature Monitors temperature for CPU & system environment

LED

Fan fail LED indicator / Over temperature warning indicator

/ Fan & PSU fail LED indicator

Monitoring

Others Watchdog timer support

Onboard Chipset Onboard Aspeed AST2050

AST2050 IPMI

Feature

IPMI 2.0 compliant baseboard management controller

(BMC) / USB 2.0 virtual hub / BIOS update

Server

Management

AST2050 iKVM

Feature

24-bit high quality video compression / Dual 10/100 Mb/s

MAC interfaces

Brand / ROM size AMI / 4MB

BIOS

Feature

Plug and Play (PnP) /PCI2.3 /WfM2.0 /SMBIOS2.3 /PXE

boot / ACPI 2.0 power management /Power on mode after

power recovery / User-configurable H/W monitoring /

Auto-configurable of hard disk types

Operating

System

OS supported list Please visit our web site for the latest update.

FCC (DoC) Class A

Regulation

CE (DoC) Yes

Operating Temp. 10° C ~ 35° C (50° F~ 95° F)

Non-operating Temp. - 40° C ~ 70° C (-40° F ~ 158° F)

Operating

Environment

In/Non-operating

Humidity

90%, non-condensing at 35° C

RoHS RoHS 6/6 Complaint Yes

Barebone (1) GT24B8212 Barebone

Manual

(1) Quick Ref. Guide / (1) MB User's manual + (1) BB

User's manual

Package

Contains

Installation CD (1) TYAN installation CD

13

http://www.tyan.com

Heatsink / Cooler (2) CHSK-0270, 1207-pin CPU heatsinks

Rail kit (1) CRAL-0031, sliding rail kit for KGT24

Cable Power Cord

(1) CCBL-0310, US type power cord / (1) CCBL-0300, EU

type power cord

B8212G24V4H-LE [BTO]

Form Factor 1U Rackmount

Chassis Model GT24

Dimension (D x W x

H)

25.4" x 17.2" x 1.72" (645 x 436 x 43.6mm)

Motherboard S8212GM3NR-LE

Board Dimension EATX, 12"x13" (305x330mm)

System

Gross Weight 16 kg

Buttons (1) RST / (1) NMI / (1) ID / (1) PWR w/ LED

LEDs (1) HDD / (1) ID / (1) Warning / (3) LAN / (1) Reserved

Front Panel

I/O Ports (2) USB ports

Type / Q'ty 3.5" Hot-Swap / (4)

External Drive

Bay

Supported HDD

Interface

SATA-II 3.0Gb/s

System Cooling

Configuration

FAN (3) 40x28mm Fans + (2) 40x56mm Fans

Peripherals Type of ODD / Q'ty Slim-type DVD-ROM / (1) optional

Type EPS1U

Input Range Full-range AC(100-240V)

Frequency 47 - 63 Hertz

Power Supply

Output Watts 600 Watts

14

http://www.tyan.com

Efficiency PFC / 80-plus

Supported CPU

Series

AMD 45nm Quad-Core Opteron 2300/2400 Series

Processors (Barcelona / Shanghai / Istanbul) / Support

AMD Dual Dynamic Power Management (DDPM) feature

/ Support AMD HyperTransport (HT1 and HT3)

Technology

Socket Type / Q'ty LGA 1207-pin / (2)

Average CPU Power

(ACP) wattage

Up to 75W

CPU list Please visit our web site for the latest update.

Processor

System Bus Up to 6.4 GT/s Hyper-Transport link support

Chipset AMD SR5670 + SP5100

Chipset

Super I/O Winbond W83627

Supported DIMM Qty

(8)+(8) DIMM slots

DIMM Type / Speed Registered ECC DDR2 / 800/667/533

Capacity Up to 128GB

Memory channel 2 Channels per CPU

Memory

Memory voltage 1.8V

PCI-E (1) PCI-E Gen.2 x16 slot

Note: Support full height add-on cards

Expansion Slots

Pre-install TYAN

Riser Card

M2091, PCI-E x16 1U riser card (left)

Port Q'ty (3)

LAN

Controller Intel 82574L / Intel 82575

Connector type D-Sub 15-pin

Resolution 1600x1200@60Hz

Graphic

Chipset Aspeed AST2050

15

http://www.tyan.com

USB (6) ports (2 at front, 2 at rear and 2 Type A onboard)

COM (1) DB-9 COM port

PS/2 (1) PS/2 connector (for Keyboard and Mouse)

VGA (1) D-Sub 15-pin port

I/O Ports

RJ-45 (3) ports

Chipset Winbond W83793G

Voltage

Monitors voltage for CPU, memory, chipset & power

supply

Temperature Monitors temperature for CPU & system environment

LED

Fan fail LED indicator / Over temperature warning

indicator / Fan & PSU fail LED indicator

System

Monitoring

Others Watchdog timer support

Onboard Chipset Onboard Aspeed AST2050

AST2050 IPMI

Feature

IPMI 2.0 compliant baseboard management controller

(BMC) / USB 2.0 virtual hub / BIOS update

Server

Management

AST2050 iKVM

Feature

24-bit high quality video compression / Dual 10/100

Mb/s MAC interfaces

Brand / ROM size AMI / 4MB

BIOS

Feature

Plug and Play (PnP) /PCI2.3 /WfM2.0 /SMBIOS2.3 /PXE

boot / ACPI 2.0 power management /Power on mode

after power recovery / User-configurable H/W

monitoring / Auto-configurable of hard disk types

Operating

System

OS supported list Please visit our web site for the latest update.

FCC (DoC) Class A

Regulation

CE (DoC) Yes

Operating

Operating Temp. 10° C ~ 35° C (50° F~ 95° F)

16

http://www.tyan.com

Non-operating

Temp.

- 40° C ~ 70° C (-40° F ~ 158° F)

Environment

In/Non-operating

Humidity

90%, non-condensing at 35° C

RoHS RoHS 6/6 Complaint Yes

Barebone (1) GT24B8212 Barebone

Manual

(1) Quick Ref. Guide / (1) MB User's manual + (1) BB

User's manual

Installation CD (1) TYAN installation CD

Heatsink / Cooler (2) CHSK-0270, 1207-pin CPU heatsinks

Rail kit (1) CRAL-0031, sliding rail kit for KGT24

Package

Contains

Cable Power Cord

(1) CCBL-0310, US type power cord / (1) CCBL-0300,

EU type power cord

http://www.tyan.com

17

1.4 Standard Parts List

This section describes GT24-B8212 package contents and accessories. Open

the box carefully and ensure that all components are present and undamaged.

The product should arrive packaged as illustrated below.

1.4.1 Box Contents

Component Description

1U chassis,(4) hot swap HDDbays

TYAN

®

S8212 system board

(pre-installed)

600W single Power Supply

(2) 40x56mm System FAN

(pre-installed)

(3) 40x28mm System FAN

(pre-installed)

(1) Air duct

(pre-installed)

M1008：

LED control board (pre-installed)

M1232 HDD Backplane

M2091 PCI-E riser card

http://www.tyan.com

18

1.4.2 Accessories

If any items are missing or appear damaged, contact your retailer or

browse to TYAN

®

’s website for service: http://www.tyan.com

The web site also provides information of other TYAN

®

products, as

well as FAQs, compatibility lists, BIOS settings, etc.

1 x TYAN

®

Motherboard

Drive CD

1 x Heatsink

HDD Screws

Power Cables

From Left to right: Europe, US

Mounting Ears & Screws

Barebone Manual &

Mainboard Manual

Rail Kit

Rail with Bracket x 2 Screw Pack

19

http://www.tyan.com

1.6 About the Product

The following views show you the product.

1.6.1 System Front View

6.2 System Rear View

http://www.tyan.com

20

1.6.3 LED Definitions

Front Panel

LED State Color Description

On Green System is turned on

On Green System is under S1 or S3 state

Power

LED

Off Off Power off

Blinking Green LAN active

On Green LAN linked

NIC1

off off LAN not linked

Blinking Green LAN active

On Green LAN linked

NIC2

off off LAN not linked

Blinking Green LAN active

On Green LAN linked

NIC3

off off LAN not linked

On Red

Fan fail /Over temperature

/Over voltage

Warning

LED

Off Off No failure

On Blue System identified

ID LED

Off Off System not identified

On Amber PSU fail

Blinking Amber PSU alert

BMC LED

Off Off No failure

Rear I/O

LAN1/LAN2

LED State Color Description

On Green 10Mb/100Mb/1000Mb linked

Blinking Green 10Mb/100Mb/1000Mb activity

RJ-45

Linkage/

Activity(left)

Off Off No LAN linked

On Amber 1000Mb linked/activity

On Green 100Mb linked/activity

RJ-45

Linkage/

Activity(Right)

Off Off 10Mb mode or No LAN linked

NOTE: “Left” and “Right” are viewed from the rear panel.

Page is loading ...

Tyan GT24 B8212 User manual

Tyan GT24 B8212 User manual

Related papers

Other documents