Tyan GT24 B5501 User manual

1

http://www.tyan.com

TYAN GT24

B5501

Service Engineer’s Manual

2

http://www.tyan.com

3

http://www.tyan.com

PREFACE

Copyright

This publication, including all photographs, illustrations, and software, is

Neither this manual, nor any material contained herein, may be reproduced

without written consent of manufacturer.

TYAN

®

is a registered trademark of MiTAC International Corporation.

Version 1.00

Disclaimer

Information contained in this document is furnished by MiTAC International

Corporation and has been reviewed for accuracy and reliability prior to

printing. MiTAC assumes no liability whatsoever, and disclaims any

express or implied warranty, relating to sale and/or use of TYAN

®

products

including liability or warranties relating to fitness for a particular purpose or

merchantability. MiTAC retains the right to make changes to produce

descriptions and/or specifications at any time, without notice. In no event

will MiTAC be held liable for any direct or indirect, incidental or

consequential damage, loss of use, loss of data or other malady resulting

from errors or inaccuracies of information contained in this document.

Trademark Recognition

All registered and unregistered trademarks and company names

contained in this manual are property of their respective owners including,

but not limited to the following.

TYAN

®

is a trademark of MiTAC International Corporation.

Intel

®

is a trademark of Intel

®

Corporation.

AMI

®

, AMIBIOS

®

and combinations thereof are trademarks of AMI

Technologies.

Microsoft

®

, Windows

®

are trademarks of Microsoft Corporation.

IBM

®

, PC

®

, AT

®

and PS/2

®

are trademarks of IBM Corporation.

Winbond

®

is a trademark of Winbond Electronics Corporation.

4

http://www.tyan.com

Federal Communication Commission (FCC)

Notice for the USA

Compliance Information Statement (Declaration of

Conformity Procedure) DoC FCC Part 15: This

device complies with part 15 of the FCC Rules

Operation is subject to the following conditions:

1) This device may not cause harmful interference;

2) This device must accept any interference received including

interference that may cause undesired operation. If this equipment

does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the

user is encouraged to try one or more of the following measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and the receiver.

– Plug the equipment into an outlet on a circuit different from that of

the receiver.

Consult the dealer on an experienced radio/television technician for

help.

Notice for Canada

This apparatus complies with the Class A limits for radio interference as

specified in the Canadian Department of Communications Radio

Interference Regulations. (Cet appareil est conforme aux norms de

Classe A d’interference radio tel que specifie par le Ministere Canadien

des Communications dans les reglements d’ineteference radio.)

Notice for Europe (CE Mark)

This product is in conformity with the Council

Directive 89/336/EEC, 92/31/EEC (EMC).

CAUTION: Lithium battery included with this board. Do not puncture,

mutilate, or dispose of battery in fire. There will be danger of explosion if

battery is incorrectly replaced. Replace only with the same or equivalent

type recommended by manufacturer. Dispose of used battery according

to manufacturer instructions and in accordance with your local regulatio-

-ns.

5

http://www.tyan.com

About this Manual

This manual provides you with instructions on installing your TYAN

GT24-B5501. This Manual is intended for experienced users and

integrators with hardware knowledge of personal computers.

This manual consists of the following parts:

Chapter1:

Provides an introduction to the TYAN GT24-B5501

barebones, standard parts list, describes the external

components, gives a table of key components, and

provides block diagram of the system.

Chapter2:

Covers procedures on installing the CPU, memory

modules and hard drives.

Chapter3:

Covers removal and replacement procedures for

pre-installed components.

Appendix:

List the cable connection and FRU part tables for

reference of system setup, and technical support

in

case a problem arises with your system.

For information on the motherboard, please refer to the

attached motherboard user’s manual. You can find the detailed

description about jumper and BIOS settings from the

motherboard manual.

6

http://www.tyan.com

SAFETY INFORMATION

Before installing and using TYAN GT24-B5501, take note of the following

precautions:

·Read all instructions carefully.

·Do not place the unit on an unstable surface, cart, or stand.

·Do not block the slots and opening on the unit, which are provided for

ventilation.

·Only use the power source indicated on the marking label. If you are not

sure, contact the power company.

·The unit uses a three-wire ground cable, which is equipped with a third

pin to ground the unit and prevent electric shock. Do not defeat the

purpose of this pin. If you outlet does not support this kind of plug,

contact your electrician to replace your obsolete outlet.

·Do not place anything on the power cord. Place the power cord where it

will not be in the way of foot traffic.

·Follow all warnings and cautions in this manual and on the unit case.

·Do not push objects in the ventilation slots as they may touch high

voltage components and result in shock and damage to the

components.

·When replacing parts, ensure that you use parts specified by the

manufacturer.

·When service or repairs have been done, perform routine safety checks

to verify that the system is operating correctly.

·Avoid using the system near water, in direct sunlight, or near a heating

device.

·Cover the unit when not in use.

7

http://www.tyan.com

Table of Contents

Chapter 1: Overview.........................................................................9

1.1 About the TYAN GT24-B5501 .................................................. 9

1.2 Product Models......................................................................... 9

1.3 Features.................................................................................. 10

1.4 Standard Parts List ................................................................. 14

1.4.1 Box Contents ................................................................... 14

1.4.2 Accessories ..................................................................... 15

1.5 About the Product................................................................... 16

1.5.1 System Front View........................................................... 16

1.5.2 System Rear View ........................................................... 16

1.5.3 LED Definitions ................................................................ 17

1.5.4 Motherboard (S5501) Layout........................................... 19

1.5.5 Jumpers & Connectors .................................................... 20

1.5.6 System Block Diagram .................................................... 21

1.5.7 Internal View .................................................................... 22

Chapter 2: Setting Up.....................................................................23

2.0.1 Before you Begin ............................................................. 23

2.0.2 Work Area........................................................................ 23

2.0.3 Tools ................................................................................ 23

2.0.4 Precautions...................................................................... 24

2.1 Installing Motherboard Components....................................... 25

2.1.1 Removing the Chassis Cover .......................................... 25

2.1.2 Installing the CPU and Heatsink...................................... 26

2.1.3 Installing the Memory....................................................... 29

2.1.4 Installing Hard Drives....................................................... 32

2.1.5 Installing the PCI-E Cards ............................................... 34

2.2 Rack Mounting........................................................................ 36

2.2.1 Installing the Server in a Rack......................................... 36

8

http://www.tyan.com

2.2.2 Installing the inner Rails to the Chassis........................... 37

2.2.3 Installing the Outer Rails to the Rack .............................. 38

2.2.4 Rack mounting the Server ............................................... 40

Chapter 3: Replacing Pre-Installed Components ........................43

3.1 Introduction ............................................................................. 43

3.2 Disassembly Flowchart........................................................... 43

3.3 Removing the Cover............................................................... 45

3.4 Replacing Motherboard Components..................................... 45

3.4.1 Replacing Expansion Card .............................................. 45

3.4.2 Disconnecting All Motherboard Cables ........................... 47

3.4.3 Removing the Motherboard ............................................. 49

3.5 Replacing the LED Control Board .......................................... 50

3.5.1 M1008 LED Control Board Features ............................... 52

3.5.2 M1008 LED Control Board Connector Pin Definition ...... 52

3.6 Replacing the System Fan ..................................................... 53

3.7 Replacing the M1232 HDD Backplane................................... 56

3.7.1 M1232 HDD Backplane Features.................................... 58

3.7.2 M1232 HDD Backplane Connector Pin Definitions ......... 60

Appendix I: Cable Connection Tables .......................................... 65

Appendix II: FRU Parts Table ........................................................ 67

Appendix III: Technical Support....................................................69

9

http://www.tyan.com

Chapter 1: Overview

1.1 About the TYAN GT24-B5501

Congratulations on your purchase of the TYAN

®

GT24-B5501, a highly

optimized rack-mountable barebone system. GT24-B5501 is designed to

support one Intel

®

Xeon processor 3400 Series and up to 32GB RDIMM or

16GB UDIMM DDR3-800/1066/1333 memory, providing a rich feature set

and incredible performance. Leveraging advanced technology from Intel

®

,

GT24-B5501 server system is capable of offering scalable 32 and 64-bit

computing, high bandwidth memory design, and lightning-fast PCI-E bus

implementtation.GT24-B5501 not only empowers your company in

nowadays IT demand but also offers a smooth path for future application

usage.

TYAN

®

is also proud to deliver GT24-B5501 in flavor while supporting up to

four hot-swap hard drives. GT24-B5501 uses TYAN

®

’s latest chassis

featuring a robust structure and a solid mechanical enclosure. All of this

provides GT24-B5501 the power and flexibility to meet the needs of

nowadays server application.

1.2 Product Models

Model HDD Bays Power supply

B5501G24V4H

Hot-swap, 4 HDDs

400 Watts single

10

http://www.tyan.com

1.3 Features

TYAN GT24B5501 (B5501G24V4H)

Form Factor

1U Rackmount

Chassis Model

GT24

Dimension (D x W x

H)

25.4" x 17.2" x 1.72" (645 x 436 x 43.6mm)

Motherboard

S5501GM3NR

Board Dimension

EATX, 12"x13" (305x330mm)

System

Gross Weight

16 kg

Buttons

(1) RST / (1) NMI / (1) ID / (1) PWR w/ LED

LEDs

(1) ID / (1) Warning / (3) LAN / (1) Reserved

Front Panel

I/O Ports

(2) USB ports

Type / Q'ty

3.5" Hot-Swap / (4)

External Drive

Bay

Supported HDD

Interface

SATA-II 3.0Gb/s

System Cooling

Configuration

FAN

(4) 4cm fans

Type

EPS1U

Input Range

Full-range AC(100-240V)

Frequency

47 - 63 Hertz

Output Watts

400 Watts

Power Supply

Efficiency

PFC

Supported CPU

Series

Intel Xeon Processors 3400 Series

Processor

Socket Type / Q'ty

LGA 1156/ (1)

11

http://www.tyan.com

Thermal Design

Power (TDP)

wattage

Max up to 95W

PCH

Intel 3420

Chipset

Super I/O

Winbond W83627

Supported DIMM

Qty

(6) DIMM slots

DIMM Type / Speed

DDR3 800/1066/1333* RDIMM/UDIMM / * limit 1

per channel for 1333MHz speed

Capacity

Up to 32GB RDIMM/ 16GB UDIMM

Memory channel

2 Channels / Support 2 UDIMMs or 3 RDIMMs

per channel

Memory

Memory voltage

1.5V

PCI-E

(2) PCI-E Gen.2 x8 slots

Pre-install TYAN

Riser Card

M2091, PCI-E x16 1U riser card (left) / M2091-R,

PCI-E x16 1U riser card (right)

Expansion Slots

Note:

x8 signal when using M2091 & M2091-R

Port Q'ty

(3)

LAN

Controller

Intel 82574L

Connector type

D-Sub 15-pin

Resolution

1600x1200@75Hz

Graphic

Chipset

Aspeed AST2050

USB

(4) ports (2 at front, 2 at rear)

COM

(1) DB-9 COM port

PS/2

(1) PS/2 connector (for Keyboard and Mouse)

I/O Ports

VGA

(1) D-Sub 15-pin port

12

http://www.tyan.com

RJ-45

(3) ports

Chipset

Winbond W83793G

Voltage

Monitors voltage for CPU, memory, chipset &

power supply

Temperature

Monitors temperature for CPU & system

environment

LED

Fan fail LED indicator / Over temperature warning

indicator

System

Monitoring

Others

Chassis intrusion detection / Watchdog timer

support

Onboard Chipset

Onboard Aspeed AST2050

AST2050 IPMI

Feature

IPMI 2.0 compliant baseboard management

controller (BMC) / Supports storage over IP and

remote platform-flash / BIOS update

Server

Management

AST2050 iKVM

Feature

24-bit high quality video compression / Dual

10/100 Mb/s MAC interfaces

Brand / ROM size

AMI / 4MB

BIOS

Feature

Plug and Play (PnP) /PCI2.3 /WfM2.0

/SMBIOS2.3 /PXE boot / ACPI 2.0 power

management /Power on mode after power

recovery / User-configurable H/W monitoring /

Auto-configurable of hard disk types

Operating

System

OS supported list

Please visit our Web site for the latest update.

FCC (DoC)

Class A

CE (DoC)

Yes

Regulation

C-Tick

Yes

13

http://www.tyan.com

VCCI

Yes

Operating Temp.

10° C ~ 35° C (50° F~ 95° F)

Non-operating

Temp.

- 40° C ~ 70° C (-40° F ~ 158° F)

Operating

Environment

In/Non-operating

Humidity

90%, non-condensing at 35° C

RoHS RoHS 6/6 Complaint

Yes

Barebone

(1) GT24B5501 Barebone

Manual

(1) Quick Ref. Guide / (1) MB User's manual + (1)

BB User's manual

Installation CD

(1) TYAN installation CD

Heatsink / Cooler

(1) LGA1156 CPU heatsink

Rail kit

(1) CRAL-0031, sliding rail kit for KGT24

Mounting Ear

(1) CEAR-0050, mounting ear kit for GT20/ GT24

Others

(1) HDD screw pack

Package

Contains

Cable Power Cord

(1) CCBL-0310, US type power cord / (1)

CCBL-0300, EU type power cord

14

http://www.tyan.com

1.4 Standard Parts List

This section describes GT24-B5501 package contents and accessories.

Open the box carefully and ensure that all components are present and

undamaged. The product should arrive packaged as illustrated below.

1.4.1 Box Contents

Component Description

1U chassis,(4) hot swap HDDbays

TYAN

®

S5501 system board

(pre-installed)

400W single Power Supply

(4) 40x28mm System FAN

(pre-installed)

M1008：

LED control board (pre-installed)

M1232 HDD Backplane

(pre-installed)

M2091 PCI-E riser card

(pre-installed)

M2091-R PCI-E riser card

(pre-installed)

http://www.tyan.com

15

1.4.2 Accessories

If any items are missing or appear damaged, contact your retailer or

browse to TYAN

®

’s website for service: http://www.tyan.com

The web site also provides information of other TYAN

®

products, as

well as FAQs, compatibility lists, BIOS settings, etc.

1 x TYAN

®

Motherboard

Drive CD

1 x Heatsink

HDD Screws

Power Cables

Left to right: Europe, US

Mounting Ears & Screws

Barebone Manual &

Mainboard Manual

Rail Kit

Rail with Bracket x 2 Screw Pack

http://www.tyan.com

16

1.5 About the Product

The following overview illustrations show you the features of the product.

1.5.1 System Front View

1.5.2 System Rear View

http://www.tyan.com

17

1.5.3 LED Definitions

Front Panel

LED State Color Description

On Green System is turned on

On Green System is under S1

Power

LED

Off Off Power off

Blinking Green LAN active

On Green LAN linked

NIC1

off off LAN not linked

Blinking Green LAN active

On Green LAN linked

NIC2

off off LAN not linked

Blinking Green LAN active

On Green LAN linked

NIC3

off off LAN not linked

On Red

Fan fail /Over temperature

/Over voltage

Warning

LED

Off Off No failure

On Blue System identified

ID LED

Off Off System not identified

On Amber PSU fail

Blinking Amber PSU alert

BMC LED

Off Off No failure

Rear I/O

LAN1/LAN2

LED State Color Description

On Green 10Mb/100Mb/1000Mb linked

Blinking Green 10Mb/100Mb/1000Mb activity

RJ-45

Linkage/

Activity(left)

Off Off No LAN linked

On Amber 1000Mb linked/activity

On Green 100Mb linked/activity

RJ-45

Linkage/

Activity(Right)

Off Off 10Mb mode or No LAN linked

NOTE: “Left” and “Right” are viewed from the rear panel.

18

http://www.tyan.com

LAN3

LED State Color Description

On Green 10Mb/100Mb/1000Mb linked

Blinking Green 10Mb/100Mb/1000Mb activity

RJ-45 Linkage/

Activity(left)

Off Off No LAN linked

On Amber 1000Mb linked/activity

On Green 100Mb linked/activity

RJ-45 Linkage/

Activity(Right)

Off Off 10Mb mode or No LAN linked

ID LED

LED State Color Description

On Blue System identified

ID LED

Off Off System not identified

http://www.tyan.com

19

1.5.4 Motherboard (S5501) Layout

The diagram is representative of the latest board revision available at the time of

publishing. The board you receive may not look exactly like the above diagram.

Jumper Legend

OPEN - Jumper OFF Without jumper cover

CLOSED - Jumper ON With jumper cover

http://www.tyan.com

20

1.5.5 Jumpers & Connectors

Jumper/Connector Function

J5/J7/J27/J35/J36/J37

4-pin Fan connector

J38/J39/J40/J41/J42

8-pin 4056 Fan Header

J21/J22/J25/J26 (blue)

USB Front Panel Header

USB1

Type-A USB Connectors

LED1

ID LED

J6

COM2 Header

J12

LAN3 LED Header

J13

Chassis Intrusion Jumper

J14

Port80 Header

J16

Front Panel Connector

J17

ICH SGPIO Header

J24

PSMI Connector

J11

Enable/Disable BMC Jumper

JP1

Clear CMOS Jumper

JP2/JP3

COM switch Jumper

JP4 (S5501WGM3NR only)

Enable/Disable SAS1068E Jumper

Page is loading ...

Tyan GT24 B5501 User manual

Tyan GT24 B5501 User manual

Related papers

Other documents