TEAC LE2478FHD User manual

USER MANUAL

WARRANTY INFORMATION INSIDE. PLEASE READ

www.teac.com.au

IMPORTANT !

LE1978HD/LE2278FHD/LE2478FHD

LED/LCD TV

Trademark of TEAC Corporation JAPAN

“ For Optimum picture and sound quality,

please use TEAC Audio/Video cables ”

TEAC High Performance Audio/Video cables and connectors have

been designed to enhance your home entertainment experience.

WARRANTY REGISTRATION

Please read this warranty card.

Keep your purchase receipt to enable you to proceed quickly in the event of a Warranty Service.

Warranty Terms & Conditions

1. TEAC warrants to the original retail purchaser only, that this product is free from defects in material and

workmanship under normal domestic use and authorises free service during the warranty period at any TEAC

Authorised Service Centre only. TEAC warranty only applies to products purchased, used and serviced in

Australia.

2. Subject to the terms herein, this warranty effectively covers the equipment as specified in the Warranty Periods

Table below from the date of purchase.

TEAC PRODUCT

WARRANTY PERIOD

LED/LCD TV 106 cm and above 3 Years (1

s

t

Year In-Home Service/ Pick up Available)*

LCD Televisions 80 cm and above 1 Year (In-Home Service/Pick up Available)*

Televisions ± 59cm and above 1 Year (In-Home Service/Pick up Available)*

All Televisions under 59 cm 1 Year (No In-Home Service)

Digital Set Top Boxes & Module 1 Year (No In-Home Service)

VCR 1 Year (No In-Home Service)

DVD & Module 1 Year (No In-Home Service)

DVD Recorder & PVR Module 1 Year (No In-Home Service)

Audio Systems 1 Year (No In-Home Service)

3. In Home Service/Pick up* will only be provided as part of this warranty if all the following conditions are met;

a) The product as indicated in the Warranty Period Table.

b) The product is within the warranty period.

c) The product is located within the normal service area of the local TEAC Authorised Service Centre.

In any other situation or circumstance, where an In Home Service/Pick up* call is made, a service fee will be

charged by the Service Provider including a travel fee if outside normal service area.

If TEAC determines that the product is not repairable on site, TEAC can complete the repair by taking the

product to a TEAC Authorised Service Centre.

Where In-Home service/Pick up* is not available, the purchaser is required to send the product to the nearest

TEAC Authorised Service Centre for repair. In this event, a copy of this warranty card and a copy of your receipt

of purchase must be enclosed to be a valid warranty. Such equipment or part must be sent freight prepaid to

your nearest TEAC Authorised Service Centre. After the repair, the product will be available for collection by or

return to the purchaser at purchaser¶V cost. The warranty does not cover freight or insurance. In all cases of

transit damage or lost, a claim must be filed against the carrier by the purchaser, even if shipment is arranged

by TEAC. TEAC in-home service may also be available at a fee upon request.

4. Accessories, Remote, including power adaptors, AV box, TV tuners, etc, are warranted to be defect free for 1

year.

5. Replacement of spare parts under normal usage; except cabinet, front panel, knob, removable accessories,

battery, consumable, AC cord, connecting cord and other accessories, are warranted as specified in Warranty

Periods Table, and will be repaired or replaced at the sole judgement of TEAC.

6. The warranties hereby conferred do not extend to, and exclude, any cost associated with the installation, de-

installation or re-installation of a product (be it in-home or otherwise), including costs related to the mounting,

demounting or remounting of any screen, (and any other ancillary activities), delivery, handling, freighting,

transportation or insurance of the product or any part thereof or replacement of and do not extend to, and

exclude, any damage or loss occurring by reason of, during, associated with, or related to such installation, de-

installation, re-installation or transit.

7. 1RUPDOFXVWRPHUPDLQWHQDQFHDVGHVFULEHGLQWKHRZQHU¶VPDQXDOLVQRWFRYHUHGE\WKLVZDUUDQW\VXFKDV

cleaning VCR heads etc.)

8. Service will be provided only during normal business hours and under safety conditions and circumstances.

9. This warranty does not apply to equipment showing abuse, damage or that it may have been tampered with,

altered or repaired outside any TEAC Authorised Service Centre. If so, the warranty will be void.

*Please refer to TEAC website for your nearest Authorised TEAC Service Centre.

10. No one is authorised to assume any liability on behalf of TEAC or impose any obligation on it, in connection

with the sale of any equipment other than as stated in this warranty and outlined above.

11. In no event will TEAC be responsible or liable for indirect or consequential damages from interrupted operations

or other causes.

12. Warranty is not transferable to any subsequent purchaser if the product is sold during the warranty period.

13. LCD dead pixel policy, please contact TEAC Customer Care Centre on 1800 656 700 for assistance.

* Extended promotional warranty may apply to certain products (for more info please contact:

service@teac.com.au

). In home service administration fee is applied after 1

st

year of warranty.

WARRANTY PROCEDURES

Please keep this information for your own records.

3OHDVHUHIHUWRWKHRZQHU¶VPDQXDOWRHQVXUHWKDW\RXKDYHIROORZHGWKHFRUUHFWLQVWDOODWLRQDQGRSHUDWLQJ

procedures.

1. 5HDGRZQHU¶VPDQXDOFDUHIXOO\

2. If you require Warranty Service, please contact the TEAC Authorised Service Centre

3. Please have your purchase receipt as your proof of purchase and the following details completed for a valid

Warranty.

2ZQHU¶V1DPH

2ZQHU¶V$GGUHVV

Postcode

Model Name/No. Serial No.

'HDOHU¶V1DPH

'HDOHU¶V$GGUHVV

Postcode

4. Please ensure that your product is packed appropriately upon return to the service centre.

If you have any other queries regarding service or warranty please contact the TEAC Customer Care Centre below:

service@teac.com.au

www.teac.com.au

1800 656 700

CONTENTS

Safety Precautions

Power Supply 1

Installation 2

Use and Maintenance 3

Important Safety Instructions 4~5

General Description

7)weiVtnorF(traphcaefosemaN

Accessories / Wall mounting Information

Names of each part(Back View) 8

9

Connecting an Antenna

Remote control 10~11

21lortnocetomeresuotwoH/snoituacerP

Application

31ecruostupnignitceleS/VTDCLehtgnirewoP

Operating the Menu 14

15

Customising the PICTURE Settings

Customising the TIME Settings

Customising the OPTION Settings

Customising the LOCK Settings

Customising the CHANNEL Settings

16

18

19

20~21

6

USB Mode

EPG

21

Customising the SOUND Settings

17

Trouble shooting 24

Specifications

Maintenance and Service

NOTE: The illustrations in this manual serve mainly as a reference and may differ slightly from your device.

22~23

25~26

It is the responsibility of

the user to make sure all

precautions and warnings

are heeded and followed.

1

Disconnect device: plug/coupler or all-pole mains switch locationˈ

2

Do not display still images and

partially still images on the LED

panel for more than 2 hours as it

can cause screen image retention.

This image retention is also known

as “screen burn”. To avoid

such image retention, reduce the

degree of brightness and contrast

of the screen when displaying a

still image.

Watching the LED TV in 4:3 format

for a long period of time may leave

traces of borders displayed on the

left, right and centre of the screen

caused by the difference of light

emission on the screen. Playing a

DVD or a game console may cause

a similar effect to the screen. Damages

caused by the above effect are not

covered by the Warranty.

Displaying still images from Video

games and PC for longer than a

certain period of time may produce

partial after-images. To prevent this

effect, reduce the ‘brightness’ and

‘contrast’ when displaying still images.

Although the LCD screen is made with high-precision technology and 99.99% or more of the pixels are effective,

black dots may appear or bright points of light (red, blue, or green) may appear constantly on the LCD screen. This

is a structural property of the LCD screen and is not a malfunction.

3

4

The manufacturer will not be held responsible for the damage caused by any substitutions

and modification of the product without authorisation from the manufacturer’s or authorised

service agent.

5

Wall Mounting Information

Stand and wall-mounted (optional)

Your LCD TV is able to accommodate wall mounting with the use of a wall mount bracket (not supplied with LCD TV, please

contact your local hardware store) and the mounting holes on the back of the unit.

We recommend removing the TV stand prior to wall mounting the TV. Please refer to the figure and the procedure below.

How to remove/re-install the stand

How to mount the LCD TV on the wall

Follow instructions below to remove the base of the TV:

1. Place the unit (face down) on a soft blanket.

2. Loosen and remove the 2 screws securing the stand to the

TV set, as per the diagram to the right.

3. Gently remove the stand.

4. To re-install the stand, place the unit (face down) on a soft

blanket and reverse instructions as above.

1. After detaching the stand, fasten 4 mounting screws (thread size M4X10 - not supplied! Please

2. Fasten wall mounting bracket (Not supplied with LCD TV, please contact your local hardware store)

with screws on the wall.

3. Carefully check for the strength before releasing the LCD TV.

NOTE: For more detailed instructions please refer to your “after market” wall mounting instruction book.

Thread hole size – M4 x 10 depth (TV mounting screw size) on the TV.

User’s Guide Power Cable Adaptor Remote Control

REVEAL

INPUT

POWER

TV/TXT CANCEL

HOLD SIZE INDEXSUBPAGE

123

456

789

0

OK

FAV

MENU

NICAM/A2

TV/RADIO

EXIT

CH

INFO

PICTURE

SOUND

SLEEP

SUBTITLE

DTV

CH/LIST

STOP

VOL

REP

EPG

USB

ASPECT

+

-

MUTE

118020260

Accessories

Screw holes

100mm

100mm 100mm

General Description

6

2 x AAA Battery

4

TV/AV button - Input Source Select Button

1

MENU button - OSD Menu Display Button

2

CH+/- button - Channel/Program +,- Button

3

VOL+/- button - Volume +,- Button

7

POWER button

5

LED Indicator

6

Remote Control Window

1

2 3

4 5

67

General Description

7

DC POWER IN(DC 12V 5A)

1 5

HEADPHONE OUT

9

HDMI

USB

2 6

RF

10

VGA(D-Sub 15PIN)

3

AV1

AV2

7

COAX OUT

11

PC AUDIO IN

8

YPbPr˄Component˅

4

Power Connecting

1. Connect the small round plug on the power adaptor cable to the power

input socket at the rear of the set.

2. Connect the mains cable between the power adaptor and the mains supply.

Power adaptorMains cable

L-in

AV 2

R-in

L-in

AV 1

R-in

1 2 3 4 5 6 7

10

9

11

8

USB

Component

8

General Description

Back View

Press INPUT button on the remote control to display the input source menu, press / button to select TV, then

press button to confirm. Then you can receive the signal.

L-in

AV 1

R-in

Component

General Description

Connecting an Antenna

9

MENU

Press to display the OSD menu.

INPUT

Display the input source menu.

DTV

Switch to DTV source.

USB

NICAM/A2

Switch to USB source.

EXIT

Press to exit the OSD menu.

NUMBER BUTTONS

Choose channel directly.

Press number buttons and press

OK button to play the channel.

Return to the previous channel

viewed.

REVEAL

INPUT

POWER

TV/TXT CANCEL

HOLD SIZE INDEXSUBPAGE

123

456

789

0

OK

FAV

MENU

NICAM/A2

TV/RADIO

EXIT

CH

INFO

PICTURE

SOUND

SLEEP

SUBTITLE

DTV

CH/LIST

STOP

VOL

REP

EPG

USB

ASPECT

+

-

MUTE

118020260

POWER

Turn the TV on/standby.

Select different audio languages,

MUTE

Press to mute the sound.

Press again or press VOL+ to

unmute.

TV/RADIO

Press to toggle between

TV and Radio

ASPECT

Cycles among screen display

modes.

SUBTITLE

Press to view a list of available

subtitles.

SLEEP

Repeatedly press to scroll to

preferred off time.

FAV

Display the favorite program list.

INFO

Press to view information on the

program you are watching. Also

provides information for future

programs in EPG mode.

General Description

uses an Infra-Red (IR) signal. Please point

subject to availability from

broadcaster.

10

REVEAL

INPUT

POWER

TV/TXT CANCEL

HOLD SIZE INDEXSUBPAGE

123

456

789

0

OK

FAV

MENU

NICAM/A2

TV/RADIO

EXIT

CH

INFO

PICTURE

SOUND

SLEEP

SUBTITLE

DTV

CH/LIST

STOP

VOL

REP

EPG

USB

ASPECT

+

-

MUTE

118020260

CH

Channel/Program .

VOL+/-

Volume +/-.

/

PICTURE

Press repeatedly to cycle

through the available video

picture modes.

SOUND

Press to cycle through the

different sound settings.

CH/LIST

Display the programs list.

EPG

To show the Electronic

Program Guide.

TV/TXT

Turn off/on the Teletext display.

CANCEL

Cancel the Teletext display.

REVEAL

Reveal any hidden text.

HOLD

Hold or carry on the current

subpage.

SIZE

Press to see top half of page

double size, Press again

to see the bottom half of page

double size. Press again for

normal size.

SUBPAGE

Press to subpage, again to cancel.

INDEX

Go to index.

Colour buttons

Short cuts-follow the coloured

links in the text.

Buttons for TELETEXT operating

Teletext is an information system

broadcast by certain channels which

can be consulted for news, weather

forecasts, puzzles, etc, and also offers

subtitles for viewers with hearing

problems or who are not familiar with

the transmitted language. Subject to

availability.

Buttons for USB operation The

following functions are only available in

USB mode:

STOP

Stop Multimedia program.

REP

Repeat Multimedia program.

Fast reverse

Fast forward

Previous track

Next track

Play / Pause

General Description

11

General Description

Check with local authorities when disposing of batteries.

Keep the path between the remote and TV free of obstructions.

12

DTV

ATV

AV 1

AV 2

YPbPr

VGA

HDMI

USB

INPUT

equipment

13

General Description

TIME MENU:

Allows you to setup a variety of timer options.

LOCK MENU:

Allows you to set up a variety of lock options.

OPTION MENU:

Allows you to setup a variety of setup options.

CHANNEL MENU:

Allows you to search channels and set up a variety of channel options.

Allows you to customise the sound options and effects.

Use the and buttons to select your main menu optionDQGXVH2.RUźWRFRQILUP

EXIT

MENU

4.

5.

14

Tint

tiuQkcaB Select

Quit Back Select

Victoria GMT+10

Factory Reset

Quit Back Select

Change Password

Block Program

Parental Guidance

Off

No Block

LOCK

Lock Channel

Quit Back Select

Scan

Quit Back Select

Tint

Quit QuitBack BackSelect

Quit Back Select

Select

Size

PC Setup

Note: Only available in VGA mode.

Colour

Colour Temperature

NOTE: Contrast, Brightness, Colour and Sharpness are only available to adjust

when Picture Mode is set to 'User'. Standard, Dynamic and Mild settings are all

preset and not adjustable.

Only available to adjust for NTSC signal.

picture noise

to your preferred settings.

can

15

Auto adjust: Enter sub menu to enable automatic adjustment of the image

settings, such as position and phase.

Horizontal Position: Moves the image on the screen left or right.

Vertical Position: Moves the image on the screen up or down.

Size: Adjust the horizontal width of the image on the screen.

Phase: Improves the focusing of a static image.

Customising PICTURE Settings

Page is loading ...

TEAC LE2478FHD User manual

This manual is also suitable for

TEAC LE2478FHD User manual

Related papers

Other documents