LG 42PA4900 User manual

User’s Guide Specication

Creator Adviser Approver

In charger

DD/MM/YY

SI Kim

17/01/12

HJ Shin

17/01/12

JO Kim

17/01/12

1. Model Description

2. Printing Specication

3. Special Instructions

4. Changes

Model 42PA4500-ZF/50PA6500-ZA Brand LG Part number

Sufx DK Product name 42PA4500

50PA6500

MFL67099986

(1204-REV01)

1. Trim Size (Format) : 182 mm x 257 mm

2. Printing Colors

Cover : 1 COLOR (BLACK)

Inside : 1 COLOR (BLACK)

3. Stock (Paper)

y

Cover : Uncoated paper ,

백상지

60 g/m

2

y

Inside : Uncoated paper ,

백상지

60 g/m

2

4. Printing Method : Off-set

5. Bindery : Saddle Stitch

6. Language : English/Russian/Kazakh/Ukrainian (4)

7. Number of pages : 88

N

O

T

E

S

“This part contain Eco-hazardous substances (Pb, Cd, Hg, Cr6+, PBB, PBDE, etc.) within LG standard level,

Details should be followed Eco-SCM management standard[LG(56)-A-2524].

Especially, Part should be followed and controlled the following specication.

(1)Eco-hazardous substances test report should be submitted

when Part certication test and First Mass Production.

(2) Especially, Don’t use or contain lead(Pb) and cadmium(Cd) in ink.

(1) Origin Notication

* LGEIN : Printed in Indonesia * LGEWA : Printed in U.K.

* LGESP : Printed in Brazil * LGEMX : Printed in Mexico

* LGEND : Printed in China * LGEIL : Printed in India

* LGEMA : Printed in Poland

02/04/12 Kim SI EKPC300231 Manual Revision For Added Models.

Rev.

No.

DD/MM/YY Creator ECO Number Change description

1

2

3

4

5

6

7

8

9

10

11

12

13

14

Pagination sheet

Total pages : 88 pages

Front

Cover

(EN)

P/No.

2 ... ... .... .... 21

Blank

Front

Cover

(RU)

2 ... ... .... .... 21

Blank

Front

Cover

(KA)

2 ... ... .... .... 21

Blank

Front

Cover

(UK)

2 ... ... ... ... 21

Back

Cover

(EN)

www.lg.com

OWNER’S MANUAL

PLASMA TV

Please read this manual carefully before operating your

set and retain it for future reference.

PA45**

PA49**

PA55**

PA65**

P/NO : MFL67099986 (1204-REV01)

Printed in Korea

2

SAFETY INSTRUCTIONS

ENGLISH



Please read these safety precautions carefully before using the product.



In this manual, the illustration may be somewhat different from your product because

it is just example to help the instruction.

PRECAUTION IN INSTALLING THE

PRODUCT

Keep away from heat sources like electrical

heaters.

- Electrical shock, fire, malfunction or

deformation may occur.

If you can smell smoke or other odours or hear

a strange sound unplug the power cord and

contact the service center.

- If you continue to use without taking proper

measures, electrical shock or fire can occur.

Do not use the product in damp place such

as a bathroom or any place where it is likely

to get wet.

- This may cause a fire or could give an

electric shock.

Install the product on a flat and stable place

that has no risk of dropping the product.

- If the product is dropped, you may be injured

or the product may be broken.

Keep the product away from direct sunlight.

- The product can be damaged.

Do not place the product in a built-in

installation such as bookcase or rack.

- Ventilation required.

ELECTRICAL POWER RELATED

PRECAUTIONS

Make sure to connect the power cable to a

properly earthed outlet.

- You may be electrocuted or injured.

Do not touch the power plug with wet hands.

Additionally, it the cord pin is wet or covered with dust,

dry the power plug completely or wipe dust off.

- You may be electrocuted due to excess moisture.

Never touch this product or antenna during a

thunder or lighting storm.

- You may be electrocuted.

Do not insert a conductor (like a metal chopstick)

into one end of the power cable while the other

end is connected to the input terminal on the wall.

Additionally, do not touch the power cable right after

plugging into the wall input terminal.

You may be electrocuted.

Protect the power cord from physical or

mechanical abuse, such as being twisted,

kinked, pinched, closed in a door, or walked

upon. Pay particular attention to plugs, wall

outlets, and the point where the cord exits

the appliance.

PRECAUTIONS WHEN MOVING THE

PRODUCT

Do not impact the product when moving it.

- You may be electrocuted or the product

can be damaged.

Make the panel face forward and hold it

with both hands to move.

- If you drop the product, the damaged

product can cause electric shock or fire.

Contact your nearest service center for

repair.

Make sure to turn off the product.

Make sure to remove all cables before

moving the product.

- You may be electrocuted or the product

can be damaged.

PRECAUTIONS WHEN USING THE

PRODUCT

Do not disassemble, repair or modify the

product at your own discretion.

- Fire or electric shock accident can occur.

- Contact the service center for check,

calibration or repair.

To reduce the risk of fire or electric shock,

do not expose this apparatus to rain or

moisture.

Apparatus shall not be exposed to

dripping or splashing and no objects

filled with liquids, such as vases, shall be

placed on the apparatus.

Refer all servicing to qualified service

personnel. Servicing is required when

the apparatus has been damaged in any

way, such as power supply cord or plug

is damaged, liquid has been spilled or

objects have fallen into the apparatus, the

apparatus has been exposed to rain or

moisture, does not operate normally, or

has been dropped.

IMPORTANT INFORMATION TO PREVENT “IMAGE BURN /

BURN-IN” ON YOUR TELEVISION SCREEN

-

When a fixed image (e.g. logos, screen menus, video game,

computer display or teletext pages) is displayed on the

television for an extended period it can become permanently

imprinted on the screen. This phenomenon is known as “image

burn” or “burn-in”. Image burn is not covered under the

manufacturer’s warranty.

-

In order to prevent image burn, avoid displaying a fixed

image on your television’s screen for a prolonged period (2 or

more hours for LCD, 1 or more hours for Plasma).

-

Image burn can also occur on the letterboxed areas of

your television if you use the 4:3 aspect ratio setting for an

extended period.

As long as this unit is connected to the AC wall outlet, it is

not disconnected from the AC power source even if you

turn off this unit by SWITCH.



If you ignore the warning message, you may be seriously injured or there is a

possibility of accident or death.



If you ignore the caution message, you may be slightly injured or the product may be damaged.

CAUTION

WARNING

CAUTION

WARNING

CAUTION

WARNING

CAUTION

WARNING

3

TABLE OF CONTENTS

ENGLISH

TABLE OF CONTENTS

3 TABLE OF CONTENTS

4 INSTALLATION PROCEDURE

4 ASSEMBLING AND PREPARING

4 Unpacking

8 Separate purchase

8 Parts and buttons

11 Lifting and moving the TV

12 Setting up the TV

12 - Attaching the stand

14 - Tidying cables

15 - Mounting on a table

16 - Mounting on a wall

16 ADDITIONAL INFORMATION

17 REMOTE CONTROL

18 WATCHING TV

18 Connecting an antenna

18 Turning the TV on for the first time

19 MAKING CONNECTIONS

19 Connecting your Unit

19 OPEN SOURCE SOFTWARE NOTICE

20 WEIGHT

20 TROUBLESHOOTING

4

INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING

ENGLISH

ASSEMBLING AND PREPARING

Unpacking

Check your product box for the following items. If there are any missing accessories, contact the local dealer

where you purchased your product. The illustrations in this manual may differ from the actual product and item.

Remote control,

Batteries (AAA)

Owner’s manual,

CD manual

Cable Holder

x 3 x 4

M5 x 16 M4 x 30

Screw for assembly

Power Cord Holder Power Cord

Protection Cover Ferrite core

(Depending on model)

Polishing cloth

(Depending on model)

Gently wipe the spots on the

cabinet with the polishing cloth.

Stand Body Stand Base Isolator

1

(Depending on model)

Only 42/50PA45**, 50/60PA55**, 50/60PA65**

INSTALLATION PROCEDURE

1

Open the package and make sure all the accessories are included.

2

Attach the stand to the TV set.

3

Connect an external device to the TV set.

5

ASSEMBLING AND PREPARING

ENGLISH

Remote control,

Batteries (AAA)

Owner’s manual,

CD manual

Pentouch Caution Guidelines

x 3 x 4

M5 x 16 M4 x 30

Screw for assembly

Power Cord Holder D-sub 15 pin signal cable

Protection Cover Ferrite core

(Depending on model)

Power Cord

x 2

Cable Holder Eye-bolt , Wall bracket Polishing cloth

(Depending on model)

Gently wipe the spots on the

cabinet with the polishing cloth.

Home

Charging Cable Tip

The number of tip may differ

depending on the model.

Touch Pen (AN-TP300)

The number of touch pen may

differ depending on the model.

Touch Pen Dongle

(AN-TD200)

Cradle Stand Base

Stand Body Isolator

1

(Depending on model)

Only 42/50PA49**

6

ASSEMBLING AND PREPARING

ENGLISH

1 Antenna Isolator Installation Guide



Use this to install TV in a place where there is a voltage difference between GND of power and GND of

antenna signal.

- If there is a voltage difference between GND of power and GND of antenna signal, the antenna contact

might be heated and excessive heat might cause an accident.



You can improve the safety when watching TV by efficiently removing power voltage from TV antenna.

Avoid disconnecting the antenna Isolator after installation.

Isolator

Plug 1 Plug 2

Plug 1

Plug 2



Exterior of antenna isolator:



Connection method :

- Connect Plug 1 with a signal cable.

- Connect Plug 2 with ANT input end on the back of TV.

ANTENNA/

CABLE IN

ANTENNA/

CABLE IN

RF-Coaxial Wire Isolator

ANTENNA/

CABLE IN

ANTENNA/

CABLE IN

RF-Coaxial Wire Isolator

STB

ANTENNA/

CABLE IN

“Equipment connected to the protective earthing of the building installation through the mains connection or

through other equipment with a connection to protective earthing - and to a cable distribution system using

coaxial cable, may in some circumstances create a fire hazard.

Connection to a cable distribution system has therefore to be provided through a device providing electrical

isolation below a certain frequency range (galvanic isolator, see EN 60728-11)”

When applying the RF Isolator, a slight loss of signal sensitivity can occur.

7

ASSEMBLING AND PREPARING

ENGLISH



The items supplied with your product may vary depending on the model.



Product specifications or contents of this manual may be changed without prior notice due to

upgrade of product functions.

How to use the ferrite core

1 Use the ferrite core to reduce the electromagnetic interference in the PC audio cable.

Wind the PC audio cable on the ferrite core thrice. Place the ferrite core close to the TV.

2 Use the ferrite core to reduce the electromagnetic interference in the power cable.

Wind the power cable on the ferrite core once. Place the ferrite core close to the TV and a wall plug.

[to an External device]

[Figure 1]

[to the TV]

10 mm(+ / - 5 mm)

3 Use the ferrite core to reduce the electromagnetic interference in the component Y, Pb, Pr, L,

R cable.

Wind the

component Y, Pb, Pr, L, R cable

on the ferrite core once.

Place the ferrite core close to the TV.

[Cross Section of

Ferrite Core]

(Gray)

[to an External device]

[Figure 3]

[to the TV]

10 mm(+ / - 5 mm)

[Cross Section of

Ferrite Core]

(Black)

[to a wall plug]

[to the TV]

[Figure 2]

[Cross Section of

Ferrite Core]

(Black)

- If there is one ferrite core, follow as shown in Figure 1.

- If there are three ferrite cores, follow as shown in Figures 1 and 2.

- If there are four ferrite cores, follow as shown in Figures 1, 2 and 3.

- If there is LAN port, additionally follow as shown in Figure 4.

NOTE

4 Use the ferrite core to reduce the electromagnetic interference in the LAN cable. Wind the

LAN cable thrice on the ferrite core. Place the ferrite core close to the TV and an External device.

A (Gray) B (Gray)

[Cross Section of

Ferrite Core]

[to the TV]

[to an External

device]

B A A

[Figure 4]

 For an optimal connection, HDMI cables and USB de-

vices should have bezels less than 10 mm thick and

18 mm width. Use an extension cable that supports

USB 2.0 if the USB cable or USB memory stick does

not fit into your TV’s USB port.

*A 10 mm

*B 18 mm

8

ASSEMBLING AND PREPARING

ENGLISH



Do not use any pirated items to ensure the safety and product life span.



Any damages or injuries by using pirated items are not covered by the warranty.

CAUTION

Separate purchase

Separate purchase items can be changed or modified for quality improvement without any notification.

Contact your dealer for buying these items.

This device only works with compatible LG Plasma TV.

AN-TP300

Touch Pen, Cradle

The number of touch pen and

cradle may differ depending on

the model.

Compatibility

42/50PA45** 50/60PA55** 50/60PA65** 42/50PA49**

AN-TP300

Touch Pen, Cradle

•

Only

42/50PA49**,

50/60PA65**

Parts and buttons

 TV can be placed in standby mode in order to reduce the power consumption. And TV should be

turned off if it will not be watched for some time, as this will reduce energy consumption.

 The energy consumed during use can be significantly reduced if the level of brightness of the

picture is reduced, and this will reduce the overall running cost.

NOTE



Do not step on the glass stand or subject it to any impact. It may break, causing possible injury

from fragments of glass, or the TV may fall.



Do not drag the TV. The floor or the product may be damaged.



Some models have a thin film attached on to the screen and this must not be removed.

CAUTION

9

ASSEMBLING AND PREPARING

ENGLISH

Screen

Connection panel

Speakers

1 Intelligent sensor - Adjusts the image quality corresponding to the surrounding environment.

Button Description

Turns the power on or off

Changes the input source

Accesses the main menus, or saves your input and exits the menus

Selects the highlighted menu option or confirms an input

Adjusts the volume level

Scrolls through the saved programmes

Remote control and

intelligent

1

sensors

Power Indicator



Red – In Standby

mode



Off – TV turns on



Image shown may differ from your TV.

Menu Description

1

PCMCIA Card Slot

2

USB input

3

HDMI IN 3

4

HDMI / DVI IN 2

1

2

4

3

Only

42/50PA49**,

50/60PA65**

Only

42/50PA45**,

50/60PA55**

(Only LAN PORT

model)

Only 42/50PA45**-ZA~F, 42/50PA49**-ZA~F, 50/60PA55**-ZA~F, 50/60PA65**-ZA~F

10

ASSEMBLING AND PREPARING

ENGLISH

Screen

Connection panel

Speakers

1 Intelligent sensor - Adjusts the image quality corresponding to the surrounding environment.

Button Description

Turns the power on or off

Changes the input source

Accesses the main menus, or saves your input and exits the menus

Selects the highlighted menu option or confirms an input

Adjusts the volume level

Scrolls through the saved programmes

Remote control and

intelligent

1

sensors

Power Indicator



Red – In Standby

mode



Off – TV turns on



Image shown may differ from your TV.

Menu Description

1

PCMCIA Card Slot

2

USB input

3

HDMI IN 3

4

HDMI IN 2

1

2

4

3

Only

42/50PA49**,

50/60PA65**

Only

42/50PA45**,

50/60PA55**

(Only LAN PORT

model)

Only 42/50PA45**-ZG~M, 42/50PA49**-ZG~M, 50/60PA55**-ZG~M, 50/60PA65**-ZG~M

11

ASSEMBLING AND PREPARING

ENGLISH

Lifting and moving the TV

When moving or lifting the TV, read the following to

prevent the TV from being scratched or damaged

and for safe transportation regardless of its type

and size.



It is recommended to move the TV in the box

or packing material that the TV originally came

in.



Before moving or lifting the TV, disconnect the

power cord and all cables.



When holding the TV, the screen should face

away from you to prevent the screen from

scratches.



When transporting a large TV, there should be

at least 2 people.



When transporting the TV by hand, hold the

TV as shown in the following illustration.



Avoid touching the screen at all times, as

this may result in damage on the screen

or some of the pixels used to create

images.

CAUTION



Hold the top and bottom of the TV frame firmly.

Make sure not to hold the transparent part,

speaker, or speaker grill area.



When transporting the TV, do not expose the

TV to jolts or excessive vibration.



When transporting the TV, keep the TV

upright, never turn the TV on its side or tilt

towards the left or right.

Connection panel

12

ASSEMBLING AND PREPARING

ENGLISH

Setting up the TV



Image shown may differ from your TV.

Attaching the stand

Put your TV on a pedestal stand and mount the TV on a table or wall.

If you are not mounting the TV to a wall, use the following instructions to attach the stand.

1 2

3

Front

M5 x 16

3 EA

Only 42/50PA45**, 42/50PA49**, 50/60PA55**, 50/60PA65**



When attaching the stand to the TV

set, place the screen facing down on a

cushioned table or flat surface to protect

the screen from scratches.

CAUTION



Tighten the screws firmly to prevent the TV

from tilting forward. Do not over tighten.

CAUTION

Stand Base

Stand Body

M4 x 30

4 EA

13

ASSEMBLING AND PREPARING

ENGLISH

CAUTION

 Tighten the screws firmly to prevent the TV

from tilting forward. Do not over tighten.

M4 x 30

4 EA

1

2

To detach the stand,

Protection Cover

3



When attaching the stand to the TV

set, place the screen facing down on a

cushioned table or flat surface to protect

the screen from scratches.

CAUTION



This will protect the opening from accu-

mulating dust and dirt.



When installing the wall mounting brack-

et, use the Protection cover.

NOTE

M4 x 30

2 EA

14

ASSEMBLING AND PREPARING

ENGLISH

Tidying cables



Image shown may differ from your TV.



Do not move the TV by holding the Cable

Holder & Power Cord Holder, as the

Cable Holders may break, and injuries

and damage to the TV may occur.

CAUTION

1 Install the Power Cord Holder and Power

Cord. It will help prevent the power cable from

being removed by accident.

2 Gather and bind the cables with the Cable

Holder.

Power Cord Holder

Cable Holder

15

ASSEMBLING AND PREPARING

ENGLISH

Mounting on a table



Image shown may differ from your TV.

1

Lift and tilt the TV into its upright position on a table.

- Leave a 10 cm (minimum) space from the wall for

proper ventilation.

2

Connect the power cord to a wall outlet.

10 cm

 Do not place the TV near or on sources

of heat, as this may result in fire or other

damage.

CAUTION

 Swivel 20 degrees to the left or right and

adjust the angle of the TV to suit your

view.

NOTE

Securing the TV to a wall (Depending on model)



Image shown may differ from your TV.

1

Insert and tighten the eye-bolts, or TV brackets

and bolts on the back of the TV.

- If there are bolts inserted at the eye-bolts

position, remove the bolts first.

2

Mount the wall brackets with the bolts to the

wall.

Match the location of the wall bracket and the

eye-bolts on the rear of the TV.

3

Connect the eye-bolts and wall brackets tightly

with a sturdy rope.

Make sure to keep the rope horizontal with the

flat surface.



Use a platform or cabinet that is strong

and large enough to support the TV

securely.

NOTE



Make sure that children do not climb on

or hang on the TV.

CAUTION



When adjusting the angle of the product,

watch out for your fingers.

CAUTION

16

ASSEMBLING AND PREPARING / ADDITIONAL INFORMATION

ENGLISH

Mounting on a wall

Attach a wall mount bracket at the rear of the TV

carefully and install the wall mount bracket on a

solid wall perpendicular to the floor. When you

attach the TV to other building materials, please

contact qualified personnel.

LG recommends that wall mounting be performed

by a qualified professional installer.

10 cm

Make sure to use screws and wall mount

bracket that meet the VESA standard. Standard

dimensions for the wall mount kits are described in

the following table.

Separate purchase(Wall Mounting Bracket)

Model 42/50PA45**

42/50PA49**

50PA55**

50PA65**

60PA55**

60PA65**

VESA (A x B) 400 x 400 600 x 400

Standard screw M6 M8

Number of screws 4 4

Wall mount bracket PSW400B,

PSW400BG

PSW600B,

PSW600BG



Use the screws that are listed on the

VESA standard screw specifications.



The wall mount kit includes an installation

manual and necessary parts.



The length of screws may differ

depending on the wall mount. Make sure

to use the proper length.



For more information, refer to the manual

supplied with the wall mount bracket.

NOTE



Disconnect the power first, and then move

or install the TV. Otherwise electric shock

may occur.



If you install the TV on a ceiling or slanted

wall, it may fall and result in injury. Use

an authorized LG wall mount bracket

and contact the local dealer or qualified

personnel.



Do not over tighten the screws as this may

cause damage to the TV and void your

warranty.



Use the screws and wall mount bracket that

meet the VESA standard. Any damages

or injuries by misuse or using an improper

accessory are not covered by the warranty.

CAUTION

A

B

Viewing the owner’s manual

The owner’s manual in PDF file format is supplied

on the enclosed CD. Install the Adobe Acrobat

Reader to view the owner’s manual on your PC.

1

Insert the supplied CD. The web page appears

automatically.

2

Click Owner’s Manual on the web page.

3

View the owner’s manual.

NOTE

If the web page does not appear

automatically, access My computer and then

click LG and index.htm to view the owner’s

manual.

ADDITIONAL

INFORMATION

17

ENGLISH

REMOTE CONTROL

ENGLISH

REMOTE CONTROL

The descriptions in this manual are based on the buttons on the remote control.

Please read this manual carefully and use the TV correctly.

To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching

and ends to the label inside the compartment, and close the battery cover. Be

sure to point the remote control to the remote control sensor on the TV.

To remove the batteries, perform the installation actions in reverse.



Do not mix old and new batteries, as this may damage the remote control.

CAUTION



Image shown may differ from your TV.

(POWER)

Turns the TV on or off.

ENERGY SAVING Adjusts the brightness of the screen to reduce energy consumption .

INPUT Changes the input source; Turns the TV on .

TV/RAD Selects Radio, TV and DTV programme.

Number buttons Enters numbers.

LIST Accesses the saved programme list.

Q.VIEW Returns to the previously viewed programme.

+ - Adjusts the volume level.

FAV Accesses your favourite programme list.

MUTE Mutes all sounds.

P

∧∨ (P + -)

Scrolls through the saved programmes.

PAGE Moves to the previous or next screen.

GUIDE Shows programme guide.

SETTINGS Accesses the main menus, or saves your input and exit the menus.

Q. MENU Accesses the quick menus.

Navigation buttons

(up/down/left/right)

Scrolls through menus or options.

OK Selects menus or options and confirms your input.

Returns to the previous level.

INFO Views the information of the current programme and screen.

EXIT Clears all on-screen displays and return to TV viewing.

Coloured buttons These buttons are used for teletext (on TELETEXT models only),

Programme edit.

1

TELETEXT

BUTTONS

These buttons are used for teletext.

For further details, see the ‘Teletext’ section.

SUBTITLE Recalls your preferred subtitle in digital mode.

Control buttons

(

, , , , )

Controls the MY MEDIA menus, or the SIMPLINK compatible devices

(USB,SIMPLINK).

SIMPLINK

(Depending on model)

Accesses the AV devices connected with the HDMI cable through HDMI-

CEC.

Opens the SIMPLINK menu.

AD Switches the Audio Description On or Off.

RATIO Resizes an image.

AV MODE

(Depending on model)

Selects an AV mode

1

or

18

ENGLISH

WATCHING TV

Connecting an antenna

Connect an antenna to watch TV while referring to

the following.

To prevent damage do not connect to the mains

outlet until all connections are made between the

devices.

Connect the TV to a wall antenna socket with an

RF cable (75 Ω).

3

Follow the on-screen instructions to customize

your TV settings according to your preferences.



For optimum picture quality, adjust

antenna direction.



In poor signal areas, to achieve better

picture quality it may be necessary to

install a signal amplifier to the antenna.



If the image quality is poor with an

antenna connected, aim the antenna to

the correct direction.



An antenna cable and converter are not

supplied.

NOTE

Turning the TV on for the first

time

When you turn the TV on for the first time, the

Initial setting screen appears. Select a language

and customize the basic settings.

1

Connect the power cord to a power outlet.

2

In Standby mode, press (POWER) to turn the TV

on.

The Initial setting screen appears if you turn

the TV on for the first time.



You can also access Factory Reset by

accessing OPTION in the main menus.

NOTE

4

When the basic settings are complete,

press OK.

 If you do not complete the Initial setting, it

will appear whenever the TV turns on.

 Disconnect the power cord from the

power outlet when you do not use the TV

for a long period of time.

NOTE

5

To turn the TV off, press

(POWER)

.

Selects a language to display.

Selects Home Use for the

home environment.

Selects a country to display.

(Depending on model)

Language



Mode Setting



Country



Set Password



Time Zone



Network Setting



Auto Tuning

Selects the time zone and

daylight saving.

(When Russia is selected for

Country)

(If there is LAN port) selects

Network Setting to display.

Scans and saves

available programmes

automatically.

Set the password.

(When France or Italy is

selected for Country)



For those countries without confirmed DTV

broadcasting standards, some DTV features

might not work, depending on the DTV

broadcasting environment.



When France is selected for Country,

password is not ‘0’, ‘0’, ‘0’, ‘0’ but ‘1’, ‘2’, ‘3’,

‘4’.



To display images in the best quality for your

home environment, select Home Use.



Store Demo is suitable for the retail

environment.



If you select Store Demo, any customized

settings will switch back to the default

settings of Store Demo in 5 minutes.

NOTE

Page is loading ...

LG 42PA4900 User manual

This manual is also suitable for

LG 42PA4900 User manual

in other languages

Related papers

Other documents