System Sensor L-Series: Trim Rings Accessory (I56-0007) User manual

  • Hello! I am an AI chatbot trained to assist you with the System Sensor L-Series: Trim Rings Accessory (I56-0007) User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
3825 Ohio Avenue, St. Charles, Illinois 60174
800/736-7672, FAX: 630/377-6495
www.systemsensor.com
INSTALLATION INSTRUCTIONS
L-Series Trim Rings
For use with the following models: TR-2, TR-2W, TRC-2, TRC-2W
I56-0007-000
SPECIFICATIONS
Trim rings are available in 4 variations:
TR-2: Wall mount, red
TR-2W: Wall mount, white
TRC-2: Ceiling mount, red
TRC-2W: Ceiling mount, white
Backboxes supported:
Single gang
Double Gang
4" octagon
4" x 4" x 1
1
/
2
" Back Box
4" x 4" x 2
1
/
8
" Back Box
GENERAL DESCRIPTION
L-Series trim rings provide additional space within the backbox. The design is
universal across the L-series notification appliance line and supports indoor
horns, horn strobes, chimes, chime strobes, strobes, speakers, and speaker
strobes.
INSTALLATION
Follow the instructions below for installing trim ring models TR-2, TR-2W,
TRC-2, and TRC-2W with the L-Series devices: horn, horn strobe, strobe,
chime, chime strobe, speaker, and speaker strobe.
1. Align two screw holes on the L-series mounting plate to the correspond-
ing screw holes on the trim ring. (See Figures below.)
2. Align the two screw holes on the back box with the screw holes on the
mounting plate.
FIGURE 1: WALL MOUNT TRIM RING
A0514-00
FIGURE 2: CEILING MOUNT TRIM RING
A0515-00
Mounting Plate
Trim Ring
Back box
Notification Appliance
Mounting Plate
Trim Ring
Back box
Notification Appliance
System Sensor
®
is a registered trademark of Honeywell International, Inc.
1 I56-0007-000
©2016 System Sensor. 08-24
/