Tripp Lite B078001USB User manual

B078001USB
Tripp Lite
Brand
Tripp Lite
Model
B078001USB
Category
KVM cables
Type
User manual

Tripp Lite B078001USB, a NetCommander™ USB Server Interface Module, seamlessly integrates a USB computer/server with a B072-Series Cat5 KVM switch. This compact and lightweight device eliminates bulky KVM cables, allowing for a cleaner and more efficient installation. With no software or power supply required, simply connect the module to the computer's HD15 and USB ports, and then use a Cat5e cable to link it to the KVM switch. This versatile solution extends the reach of your KVM setup, enabling you to position the server/CPU up to 35 feet away from the switch.

Tripp Lite B078001USB, a NetCommander™ USB Server Interface Module, seamlessly integrates a USB computer/server with a B072-Series Cat5 KVM switch. This compact and lightweight device eliminates bulky KVM cables, allowing for a cleaner and more efficient installation. With no software or power supply required, simply connect the module to the computer's HD15 and USB ports, and then use a Cat5e cable to link it to the KVM switch. This versatile solution extends the reach of your KVM setup, enabling you to position the server/CPU up to 35 feet away from the switch.

Tripp Lite
1111 West 35th Street
Chicago, IL 60609 USA
Telephone: +(773) 869 1234
E-mail: [email protected]
Model #: B078-001-USB
KVM Switch Accessories - NetCommander™ USB Server Interface Module
Highlights
Needed to connect a USB Server to a B072-Series NetCommander KVM
switch via Cat5e cable
Easy to install; no software needed
No power supply required
Allows a recommended maximum distance of 35ft from KVM to
computer/server via Cat5e cable
Compact and lightweight design
Description
The Tripp Lite NetCommander USB Server Interface Module connects to the HD15 port and USB port on a computer/server, and converts them to a
single RJ45 connector. Ordinary Cat5e patch cables can then be used to connect the server to the switch ports on a Tripp Lite B072-Series
NetCommander Cat5 KVM switch. Use of Cat5e cables frees up space in the installation that would ordinarily be filled by traditional, thicker KVM
cables.
System Requirements
Server or CPU with a HD15 port and a USB port
A B072-Series NetCommander Cat5 KVM Switch
Cat5e/6 cable; up to 35ft
Package Includes
1 USB Server Interface Module
Features
Eliminates the need for thicker, heavier KVM cables
Compact, lightweight design
Plug and Play; no software required
No power supply required
Allows a Server/CPU to be located up to 35ft away from the KVM switch
Specifications
OVERVIEW
Application Connects a USB computer/server to a B072-Series Cat5 KVM Switch
CONNECTIONS
Connector A
RJ45 (FEMALE)
Side B - Connector 1
HD15 (Male)
Side B - Connector 2
USB A (Male)
Related Items
Cables and Accessories
N105-007-GY 7-ft. Gray Cat5e 350MHz Molded Shielded Patch Cable Qty: [optional]
N105-010-GY 10-ft. Gray Cat5e 350MHz Molded Shielded Patch Cable Qty: [optional]
N105-025-GY 25-ft. Gray Cat5e 350MHz Molded Shielded Patch Cable Qty: [optional]
N105-050-GY 50-ft. Gray Cat5e 350MHz Molded Shielded Patch Cable Qty: [optional]
KVM Switches & Accessories
B072-016-1 KVM Switch - 16-Port NetCommander 1U Rackmount Cat5 KVM Switch Qty: [optional]
B078-001-PS2 KVM Switch Accessories - NetCommander™ PS2 Server Interface Module Qty: [optional]
B072-008-1 KVM Switch - 8-Port NetCommander 1U Rackmount Cat5 KVM Switch Qty: [optional]
More information, including related products, owner's manuals, and additional technical specifications, can be found online at
www.tripplite.com/en/products/model.cfm?txtModelID=3269.
©2009 Tripp Lite. All Rights Reserved.
  • Page 1 1
  • Page 2 2

Tripp Lite B078001USB User manual

B078001USB
Tripp Lite
Brand
Tripp Lite
Model
B078001USB
Category
KVM cables
Type
User manual

Tripp Lite B078001USB, a NetCommander™ USB Server Interface Module, seamlessly integrates a USB computer/server with a B072-Series Cat5 KVM switch. This compact and lightweight device eliminates bulky KVM cables, allowing for a cleaner and more efficient installation. With no software or power supply required, simply connect the module to the computer's HD15 and USB ports, and then use a Cat5e cable to link it to the KVM switch. This versatile solution extends the reach of your KVM setup, enabling you to position the server/CPU up to 35 feet away from the switch.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents