Page is loading ...
JaxFone Corded Phone
Instruction Manual
If you need any help, please contact us at karenlee0916@yahoo.com
Dear Valued Customer,
Thanks very much for your business! Welcome to use JaxFone
products. We hope you're happy with our products as well as our
service.
If you have any problems (about products, refund or return), please
contact us first. We are always here for you and will provide you the
satisfactory solutions to let you have a great shopping experience.
Welcome To Contact Us
We aim to provide the high quality products and the best service to our
valued customers. And we will be appreciate if you can leave us your
feedback to share your opinions on our products.
We are looking forward to serving you again in near future.
Thanks again for your support and time, dear.
Wish you and your family a wonderful day!
JaxFone Customer Service Team
If you need any help, please contact us at karenlee0916@yahoo.com
FEATURE LIST:
- Hands-free Speakerphone with Volume Control
- Handset Volume Control
- Ringer Volume Control
- 10-Two Touch Speed Dial Memories
- Last Number Redial
- In Use Indicator and Ringer Indicator
- Flash Function
- Hold on Music Function
- Tole/Pulse Dial Mode Selectable
- Desktop/Wall Mounting
LOCATION OF CONTROLS:
1. AUTO Button 2. STORE Button 3. HOLD Button
4. SP-PHONE Volume 5. FLASH Button 6. REDIAL Button
7. SP-PHONE Button 8. RINGER Indicator 9.RINGER Volume
10. HANDSET Volume 11. Tole/Pulse Control
If you need any help, please contact us at karenlee0916@yahoo.com
INSTALLATION
1. Connect the coiled cord to handset and the telephone base.
2. Connect the telephone wire to the telephone base and wall jack.
Please pick up the handset and you will hear the dial tone, that means the
phone is ready for use. If not, please re-connect the phone line and make
sure they are inserted in the correct jack.
Please Note: This phone is powered by the telephone line. It will work
after you complete the above 2 steps. No need any batteries or DC power.
It still works when power outage in the house.
OPERATION
RINGER VOLUME HI/LO SWITCH
To control the volume of the Ringer.
SP-PHONE VOLUME HI/LO SWITCH
To control the volume of the handsfree speakerphone.
HANDSET VOLUME HI/LO SWITCH
To control the volume of the handset.
RINGER INDICATOR
LED will flash when a call comes in.
IN USE INDICATOR
Led will be bright when the phone is in use.
If you need any help, please contact us at karenlee0916@yahoo.com
RECEIVING A CALL
1. Pick up the handset or press “SP-PHONE” button when the phone
rings.
2. When you finish the phone call, put the handset back on the phone base
or press “SP-PHONE” button again.
MAKING A CALL
1. Pick up the handset or press “SP-PHONE” button to hear a dialing
tone.
2. Dial the number you want to call.
3. Hang up the handset or press “SP-PHONE” button again if you finish
the conversation.
LAST NUMBER REDIAL FUNCTION
Pick up the handset or press the “SP-PHONE” button, then press
“REDIAL” button when you hear the dialing tone.
FLASH FUNCTION
If you have subscribed to a call waiting service, the flash button replaces
the hook allowing you to take the next call.
MUSIC ON HOLD
1. When talking on the phone, press HOLD button once. The caller will
hear the music from your phone set, and your phone set is in a holding
If you need any help, please contact us at karenlee0916@yahoo.com
state.
2. To continue the phone call, just pick up the handset or press
SP-PHONE button once again.
TO STORE PHONE NUMBERS FOR SPEED DIAL
1. With the handset off the hook, press STORE button and then enter the
phone number you want to store.
2. press STORE button and then press (0-9) button for number location.
3. Replace the handset. When you have finished these steps, this phone
number will have been stored.
TO SPEED DIAL FROM STORED NUMBER
1. pick up handset (or press SP-PHONE button)
2. Press AUTO and press the correct memory location (0-9)
Then the telephone number will be automatically dialed out.
TOLE/PULSE DIAL MODE SELECTABLE
1. “P” is the pulse dialing
2. “T” is the dual tone multiple frequency dialing
Please Note: Because the most of the switchboard is dual tone multiple
frequency dialing. So, please adjust the P/T button on the “T” side. If the
phone doesn’t work on T side, please adjust P/T button on the “P” side.
If you need any help, please contact us at karenlee0916@yahoo.com
WALL MOUNTABLE
When use it as wall-mounted, put the handset aside, slide the adjustable
hook upwards to remove it from the slot. Rotate the adjustable hook by
180 degrees, then replace the adjustable hook into the slot until it locks
into position. The handset will can stay on the phone base.
Remove the filled sponge from the Hanging hole on the bottom of the
telephone base. Align the holes with the wall-mounting plate, then slide
the telephone base down until it locks securely. Replace the handset in the
telephone base.
If you need any help, please contact us at karenlee0916@yahoo.com
IMPORTANT NOTES
Telephone connections
The voltage on the network is classified as TNV-3 (Telecommunication
Network Voltages, as defined in the standard EN60950). Following a
power cut, the call in progress as well as the date and time settings is lost.
Safety precautions
- Do not allow the handset to come into contact with liquids or moisture.
- Do not open the handset or base unit. This could expose you to high
voltages.
- There is a slight chance that your product could be damaged by an
electrical storm. We recommend that you unplug the product from the
telephone socket during a storm.
- Do not use the handset in an explosive hazard area such as where there
is gas leaking.
- It is recommended that this product is not used near intensive care
medical equipments or by persons with pacemakers.
- This product can interfere with electrical equipment such as answering
machine, television, radio and computers if placed too close. We
recommend that you position the base unit at least one meter from such
appliances.
/
