Assembly Steps:
Step1: Place the Marble Table Top (A) on a soft, flat
non-abrasive surface. Attach the table Legs (B) to the
Marble Table Top (A) using the Hex Bolts (BB) and
M6 Washers (CC) with the Hex Wrench (DD). Do not
fully tighten the bolts.
Step2: Attach the Connector (C) to the table Legs (B)
using the Hex Bolts (AA) and Washers (CC). Securely
tighten all of the bolts with the Hex Wrench (DD).
Enjoy your new Brown Jordan furniture.
GREYSTONE
Dining Bar Table
Part Name
Picture
Qty
AA M6X15 mm Hex Bolt
M6X50 mm Hex Bolt
4
BB 4
CC
M6 Washer
8
DD
Hex Wrench
1
A Marble Table Top 1
B Leg 2
C Connector 1
Parts List:
A
B
C
AA
BB
CC
CC
Customer Service: 1-855-506-8164
ASSEMBLY INSTRUCTIONS
®
/
