The Artifactory 8916-40 User guide

Brand
The Artifactory
Model
8916-40
Type
User guide

This manual is also suitable for

The Artifactory 8916-40 is a versatile drapery hardware bracket designed to enhance the functionality and aesthetics of your window treatments. Crafted from durable metal, this bracket offers exceptional support for your curtains or drapes, ensuring years of reliable use. With its adjustable projection and clearance, you can customize the bracket to suit your specific window dimensions and drapery style. The 3 1/2-inch return provides ample space for the rod to extend beyond the wall, allowing for a wider range of curtain placement options.

The Artifactory 8916-40 is a versatile drapery hardware bracket designed to enhance the functionality and aesthetics of your window treatments. Crafted from durable metal, this bracket offers exceptional support for your curtains or drapes, ensuring years of reliable use. With its adjustable projection and clearance, you can customize the bracket to suit your specific window dimensions and drapery style. The 3 1/2-inch return provides ample space for the rod to extend beyond the wall, allowing for a wider range of curtain placement options.

Measuring Guide for Classic Home & The Artifactory Drapery Hardware
House Parts, Inc., P a g e 1 | 2
House Parts urges you to engage a professional installer.
BEFORE STARTING
Read instructions carefully.
Determine the proper height for the rod by taking into consideration how the panel will drape and
where brackets should be installed.
IMPORTANT
To ensure years of enjoyment and safety, hardware brackets should be attached to wood, Window
Frame or Wall Board.
When an attempt is made to install brackets into WALL BOARD without a stud [for light weight fabrics
or sheers only] it is absolutely necessary to use both screws with anchors for each bracket
installation.
Improper installation or misuse can cause draperies to fall causing potential danger.
First, Decide Where You're Going to Hang The Treatment.
Common installations for window treatments are:
1) Above the window on the wall. The brackets should be installed within the 2" space
around and above the window frame
2) To make windows appear larger and allow more light into the room, mount the rod above
the trim and allow the rod width to extend beyond the actual width of the window by 3” to 10”
3) On the wood window frame
4) Café curtains usually hang halfway down the window frame.
Drapery finials will add approximately 3 to 6 inches to your overall treatment width.
Measuring Guide for Classic Home & The Artifactory Drapery Hardware
House Parts, Inc., P a g e 2 | 2
Measuring for the Height of Your Draperies
To determine the vertical height for mounting the brackets, you need to decide if the bottom of the
draperies should fall at the window sill, below the sill, fall to the floor or puddle on the floor.
The top of the draperies should be approximately 4” above the glass so the back of the pleats will not
be visible from outside the window.
Determine the Measurements of your Brackets
Three important measurements to know are:
Projection – the distance from the front of the bracket to the wall
Return – the distance from the center of the bracket cup to the wall
Clearance – the distance from the back of the pole to the wall
Pay attention to the Projection and Return measurements of the bracket.
The Return for a standard drapery hardware bracket is 3 ½ inches.
Classic Home Wood Brackets
Bracket
The Artifactory Metal Brackets
Projection Projection
Clearance Clearance
  • Page 1 1
  • Page 2 2

The Artifactory 8916-40 User guide

Brand
The Artifactory
Model
8916-40
Type
User guide
This manual is also suitable for

The Artifactory 8916-40 is a versatile drapery hardware bracket designed to enhance the functionality and aesthetics of your window treatments. Crafted from durable metal, this bracket offers exceptional support for your curtains or drapes, ensuring years of reliable use. With its adjustable projection and clearance, you can customize the bracket to suit your specific window dimensions and drapery style. The 3 1/2-inch return provides ample space for the rod to extend beyond the wall, allowing for a wider range of curtain placement options.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents