Siemens S3054B3200 Installation guide

Type
Installation guide

Siemens S3054B3200

The Siemens S3054B3200 is an indoor load center with a maximum rating of 200A. This load center is suitable for use as service equipment when the main breaker is installed. It has a maximum short circuit current rating of 100,000 amps RMS symmetrical, 240V~. The actual rating is dependent on the branch breakers installed in this panelboard and the main/feeder breaker, if any, installed ahead of this panelboard.

Here are some of the features of the Siemens S3054B3200:

  • Suitable for use as service equipment
  • Main breaker required for use as service equipment
  • Neutral bar terminals may be used to terminate equipment grounding wires

Siemens S3054B3200

The Siemens S3054B3200 is an indoor load center with a maximum rating of 200A. This load center is suitable for use as service equipment when the main breaker is installed. It has a maximum short circuit current rating of 100,000 amps RMS symmetrical, 240V~. The actual rating is dependent on the branch breakers installed in this panelboard and the main/feeder breaker, if any, installed ahead of this panelboard.

Here are some of the features of the Siemens S3054B3200:

  • Suitable for use as service equipment
  • Main breaker required for use as service equipment
  • Neutral bar terminals may be used to terminate equipment grounding wires
  • Page 1 1

Siemens S3054B3200 Installation guide

Type
Installation guide

Siemens S3054B3200

The Siemens S3054B3200 is an indoor load center with a maximum rating of 200A. This load center is suitable for use as service equipment when the main breaker is installed. It has a maximum short circuit current rating of 100,000 amps RMS symmetrical, 240V~. The actual rating is dependent on the branch breakers installed in this panelboard and the main/feeder breaker, if any, installed ahead of this panelboard.

Here are some of the features of the Siemens S3054B3200:

  • Suitable for use as service equipment
  • Main breaker required for use as service equipment
  • Neutral bar terminals may be used to terminate equipment grounding wires

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI