Whalen SAV9PCH User manual

Brand
Whalen
Model
SAV9PCH
Type
User manual

Whalen SAV9PCH is a 9-piece counter height dining set made with wood. This dining set contains: 2 chairs, 2 seat frames with cushion, 2 left side stretchers, 2 right side stretchers, and 1 front stretcher. It has a weight of 136.1 kg/300 lb per chair and is made for adult assembly only.

The dining set is designed to be sturdy and stable, with a maximum recommended weight load of 136.1 kg / 300 lb per chair. It is also easy to assemble, with all the necessary hardware and tools included.

The Whalen SAV9PCH dining set is a great choice for any home.

Whalen SAV9PCH is a 9-piece counter height dining set made with wood. This dining set contains: 2 chairs, 2 seat frames with cushion, 2 left side stretchers, 2 right side stretchers, and 1 front stretcher. It has a weight of 136.1 kg/300 lb per chair and is made for adult assembly only.

The dining set is designed to be sturdy and stable, with a maximum recommended weight load of 136.1 kg / 300 lb per chair. It is also easy to assemble, with all the necessary hardware and tools included.

The Whalen SAV9PCH dining set is a great choice for any home.

Bayside Furnishings
®
Factory No. 17102
Date 2015-03-21 Rev. 3 Factory: GLOCVI
E
Savonne 9 Piece Counter Height Dining Set
ITM. / ART. 844024 (U.S., Costco.com, Taiwan)
ITM. / ART. 924710 (Mexico, CostcoMX.com)
Model # SAV9PCH
ASSEMBLY INSTRUCTIONS
IMPORTANT, RETAIN FOR FUTURE REFERENCE:
READ CAREFULLY
If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the
store where it was purchased. Please call our toll-free customer service number and have your
instructions and parts list ready to provide the model name, part name or factory number:
1-877-494-2536 (English, French and Spanish)
Pacific Standard Time: 8:30 a.m. - 4:30 p.m., Monday to Friday
(in the US and Canada only)
Or visit our website www.baysidefurnishings.com
Or e-mail your request to [email protected]
LOT NUMBER:
DATE PURCHASED: / /
ITM. / ART. 844024 & 924710
Bayside Furnishings
®
Page 2
E
1. Please read the Assembly Instructions prior to assembling the unit.
2. This product contains small parts, which are for adult assembly only. Keep small children away
when assembling.
3. To avoid damage, assemble the unit on a sturdy, level and non-abrasive surface.
4. Please wait until all steps are completed before fully tightening bolts.
5. Make sure all bolts and screws are tightly fastened before the unit is used.
6. Check that all bolts, screws and knobs are tight at least every 3 months or as needed.
1. Maximum load weight on chair is 136.1 kg / 300 lb
GENERAL INFORMATION, TIPS & TRICKS
Choking hazard – It contains small parts. Keep all hardware out of
reach of children!
MAXIMUM RECOMMENDED WEIGHT LOADS
THIS UNIT IS INTENDED FOR USE ONLY WITH THE MAXIMUM
WEIGHTS INDICATED. USE WITH LOAD HEAVIER THAN THE MAXIMUM
WEIGHTS INDICATED MAY RESULT IN INSTABILITY CAUSING POSSIBLE INJURY.
ITM. / ART. 844024 & 924710
Bayside Furnishings
®
Page 3
E
Parts and Hardware List
Please read completely through the instructions and verify that all listed parts and hardware are present
before beginning assembly.
A- Backrest (2x) B- Seat Frame with Cushion (2x)
C- Left Front Leg (2x) D- Right Front Leg (2x)
E- Left Side Stretcher (2x) F- Right Side Stretcher (2x) G- Front Stretcher (2x)
AA- Bolt (4x+1 extra) BB- Bolt (8x+1 extra)
CC- Hex Nut DD- Large Lock Washer EE- Large Flat Washer
(8x+1 extra) (20x+1 extra) (20x+1 extra)
FF- Wood Screw (12x+1 extra) Allen Wrench (1x) Open Wrench (1x)
Tools required
: Allen wrench and open wrench (included) and Phillips screwdriver (not included).
ITM. / ART. 844024 & 924710
Bayside Furnishings
®
Page 4
E
Assembly Instructions
1. Unpack the unit and confirm that you have all the hardware and required parts.
2. Remove the plastic caps from the hanger bolts of the Front Legs (C and D) for the following steps.
3. Attach one Left Front Leg (C) to the left front corner block of the Seat Frame (B) by inserting the hanger
bolts through the drilled holes on the corner block and fit the Flat Washer (EE), Lock Washer (DD) and
Hex Nut (CC) onto each hanger bolt. Securely tighten the Nuts with the provided Open Wrench.
NOTE: DO NOT fully tighten all the nuts until the chair has been adjusted and level all the legs so that
they do not wobble. Once adjusted, go back and tighten while making sure that the unit remains level.
4. Insert the tenon of one Front Stretcher (G) into the mortise of the Left Front Leg (C). Make sure that the
slant holes on the stretcher will face the floor when the unit is turned upright.
5. Repeat the same procedure to attach one Right Front Leg (D) to the right front corner block of the Seat
Frame (B). Be sure the mortise on Right Front Leg (D) fit onto the tenon of the Front Stretcher (G) properly.
CC
B
DD
EE
C/D
B
C
G
D
C/D
G
C/D
DO NOT fully tighten the bolts or nuts initially until all the bolts or nuts are
ready to assemble. To avoid causing damages to the thread, DO NOT over-tighten the nuts or bolts.
ITM. / ART. 844024 & 924710
Bayside Furnishings
®
Page 5
E
Assembly Instructions
6. Lay one Backrest (A) on a smooth and protective surface with the threaded inserts facing up.
7. Insert the tenon of Left and Right Side Stretchers (E and F) into the mortises of the Backrest (A). Make
sure that the slant holes on the Side Stretchers will face the floor when the unit is turned upright.
8. Attach the assembled Seat Frame (B) to the middle rail of the Backrest (A) and insert both Side Stretchers
(E and F) into the Front Legs (C and D) respectively. Insert the Bolts (BB) with the Large Washers (DD
and EE) through the drilled holes on the Seat Frame (B) at rear corner blocks and loosely tighten into the
threaded inserts on the Backrest (A). As shown.
9. Secure the Seat Frame (B) to the Backrest (A) by inserting two Bolts (AA) with the Large Washers (DD
and EE) through the drilled holes on the rear rail of the Seat Frame.
NOTE
: DO NOT fully tighten the bolts in steps (8 and 9).
B
A
C
D
B
A
E
F
E/F
A
E/F
C/D
AA
DD
EE
BB
DD
EE
ITM. / ART. 844024 & 924710
Bayside Furnishings
®
Page 6
E
Assembly Instructions
10. Position the assembled unit upside down on the carton or other support surface, as shown.
NOTE: Place a protective cover (like the bubble wrap packing material) over the carton or other support
surface to prevent from scratching.
11. Insert and screw six Wood Screws (FF) into the slant holes in the Bottom Stretchers (E, F and G).
Tighten the screws with a Phillips screwdriver.
12. Stand the assembled unit upright on a flat surface. Press down the Seat Cushion (B) to even all legs. Now,
tightly fasten all bolts with the provided Allen Wrench.
13. Repeat the same procedure to assemble the other chair.
F
C
E
D
A
G
FF
A/C/D
E/F/G
ITM. / ART. 844024 & 924710
Bayside Furnishings
®
Page 7
E
Care and Maintenance
Use a soft, clean cloth that will not scratch the surface when dusting.
Use of furniture polish is not necessary. Should you choose to use polish, test first in an inconspicuous area.
Using solvents of any kind on your furniture may damage the finish.
Never use water to clean your furniture as it may cause damage to the finish.
Always use coasters under beverage glasses and flowerpots.
Liquid spills should be removed immediately. Using a soft clean cloth, blot the spill gently. Avoid rubbing.
Always use protective pads under hot dishes and plates. Heat can cause chemical changes that may create
spotting within the furniture finish.
Stains or marks from crayons or ink markers will be difficult to remove.
In the event that your furniture is stained or otherwise damaged during use, we recommend that you call a
professional to repair your furniture.
Check bolts/screws periodically and tighten them if necessary.
Further advice about wood furniture care
It is best to keep your furniture in a climate-controlled environment. Extreme temperature and humidity
changes can cause fading, warping, shrinking and splitting of wood. It is advised to keep furniture away from
direct sunlight as sun may damage the finish.
Proper care and cleaning at home will extend the life of your purchase. Following these important and helpful
tips will enhance your furniture as it ages.
We hope you enjoy your purchase for many years.
Thank you for choosing Bayside Furnishings
®
!
QUALITY GUARANTEE
(Warranty not valid in Mexico)
We are confident that you will be delighted with your Bayside Furnishings
®
purchase.
Should this product be defective in workmanship or materials or fail under normal use, we will repair or
replace it for up to one (1) year from date of purchase. Every Bayside Furnishings
®
product is designed to meet
your highest expectations. We guarantee that you will immediately see the value of our fine furniture.
This warranty gives you specific legal rights and you may also have other rights which vary from State to State.
AUSTRALIA: Our goods come with guarantees that cannot be excluded under the Australian Consumer Law.
You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably
foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be
of acceptable quality and the failure does not amount to a major failure.
Customer Service: 1-877-494-2536 (English, French and Spanish)
Pacific Standard Time: 8:30 a.m. - 4:30 p.m., Monday to Friday
(in the US and Canada only)
www.baysidefurnishings.com
MADE IN VIETNAM / FABRIQUÉ AU VIETNAM / HECHO EN VIETNAM
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7

Whalen SAV9PCH User manual

Brand
Whalen
Model
SAV9PCH
Type
User manual

Whalen SAV9PCH is a 9-piece counter height dining set made with wood. This dining set contains: 2 chairs, 2 seat frames with cushion, 2 left side stretchers, 2 right side stretchers, and 1 front stretcher. It has a weight of 136.1 kg/300 lb per chair and is made for adult assembly only.

The dining set is designed to be sturdy and stable, with a maximum recommended weight load of 136.1 kg / 300 lb per chair. It is also easy to assemble, with all the necessary hardware and tools included.

The Whalen SAV9PCH dining set is a great choice for any home.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents