Armour Line RP77331 Operating instructions

Brand
Armour Line
Model
RP77331
Type
Operating instructions

Armour Line RP77331 is a tapered faucet seat wrench designed for removing and installing faucet seats. It features a double-end tapered sizing to fit most faucet seats and a 6-inch long shaft for added leverage. The wrench is easy to use:

  1. Remove the faucet handle.
  2. Insert the correct end of the wrench into the faucet seat, keeping it straight as you insert it.
  3. Once the wrench locks in with the seat, turn it left (counterclockwise) to remove the seat.
  4. For installation, turn the wrench right (clockwise).

Armour Line RP77331 is a tapered faucet seat wrench designed for removing and installing faucet seats. It features a double-end tapered sizing to fit most faucet seats and a 6-inch long shaft for added leverage. The wrench is easy to use:

  1. Remove the faucet handle.
  2. Insert the correct end of the wrench into the faucet seat, keeping it straight as you insert it.
  3. Once the wrench locks in with the seat, turn it left (counterclockwise) to remove the seat.
  4. For installation, turn the wrench right (clockwise).
• For removal and installation of faucet seat
• Double end tapered sizing to fit most faucet seats
• 6 in. Long shaft for added leverage
• Para desmontar e instalar asientos de válvulas de grifos
• Doble extremo ahusado (cónico) para usar en la mayoría de asientos
• Vástago de 15.2 cm de largo para mayor palanca
RP77331
Scan to see product line
Escanear para ver la línea de productos
TAPERED FAUCET SEAT WRENCH
LLAVE AHUSADA CÓNICO PARA ASIENTO DE GRIFO
Manufactured to/Fabricado para/
specifications in/especificaciones en: China
V
• For removal and installation of faucet seat
• Double end tapered sizing to fit most faucet seats
• 6 in. Long shaft for added leverage
• Para desmontar e instalar asientos de válvulas de grifos
• Doble extremo ahusado (cónico) para usar en la mayoría de asientos
• Vástago de 15.2 cm de largo para mayor palanca
RP77331
primeline.net
©2017 Prime-Line Products
26950 San Bernardino Ave.,
Redlands, CA 92374
• Wear safety goggles, user and all bystanders.
• Keep tools away from children.
• El operador y las personas alrededor deben usar
gafas de seguridad.
• Mantenga las herramientas alejadas de los niños.
CAUTION/ADVERTENCIA
!
Read all instructions before using product
Lea todas las instrucciones antes de usar esta herramienta
1. Remove faucet handle.
2. Determine correct end to use and insert tool into the faucet seat. Note: Keep
tool straight as you insert in.
3. Once step on tool locks in with seat, turn left (counterclockwise) to remove.
4. For installation, turn right (clockwise). Note: If trouble putting on seat,
possible cross threading, stop & restart.
1. Desmonte la manija del grifo.
2. Inserte el extremo adecuado de la llave en el asiento del grifo,
manteniéndola derecha al insertarla.
3. Cuando la llave encaje en el asiento, gírela a la izquierda (sentido
antihorario) para sacarla.
4. Para instalar, gire a la derecha (sentido horario). Nota: Si tiene problema
en instalar el asiento, podría estar mal enroscado. Sáquelo y vuelva a
comenzar.
TAPERED FAUCET SEAT WRENCH
LLAVE AHUSADA CÓNICO PARA
ASIENTO DE GRIFO
  • Page 1 1

Armour Line RP77331 Operating instructions

Brand
Armour Line
Model
RP77331
Type
Operating instructions

Armour Line RP77331 is a tapered faucet seat wrench designed for removing and installing faucet seats. It features a double-end tapered sizing to fit most faucet seats and a 6-inch long shaft for added leverage. The wrench is easy to use:

  1. Remove the faucet handle.
  2. Insert the correct end of the wrench into the faucet seat, keeping it straight as you insert it.
  3. Once the wrench locks in with the seat, turn it left (counterclockwise) to remove the seat.
  4. For installation, turn the wrench right (clockwise).
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents