Kichler Lighting 44218CLP User manual

Brand
Kichler Lighting
Model
44218CLP
Type
User manual

Kichler Lighting 44218CLP is a lighting fixture designed for indoor use. It comes with a mounting strap, outlet box, and a variety of screws and knobs for easy installation. The fixture can be adjusted to suit the position of the fixture and the mounting strap can be adjusted to fit the position of the outlet box. The fixture is intended for installation in accordance with the National Electrical Code (NEC) and all local code specifications. It supports a variety of wire types, including parallel cord, insulated wire, and clear, brown, gold, or black wire.

Kichler Lighting 44218CLP is a lighting fixture designed for indoor use. It comes with a mounting strap, outlet box, and a variety of screws and knobs for easy installation. The fixture can be adjusted to suit the position of the fixture and the mounting strap can be adjusted to fit the position of the outlet box. The fixture is intended for installation in accordance with the National Electrical Code (NEC) and all local code specifications. It supports a variety of wire types, including parallel cord, insulated wire, and clear, brown, gold, or black wire.

IS-44218-US
We’re here to help 866-558-5706
Hrs: M-F 9am to 5pm EST
4) Make wire connecons. Reference chart below for
correct connecons and wire accordingly.
Connect Black or Red
Supply Wire to:
Connect White Supply
Wire to:
Black White
*Parallel cord (round &
smooth)
*Parallel cord (square &
ridged)
Clear, Brown, Gold or
Black without Tracer
Clear, Brown, Gold or Black
with Tracer
Insulated wire (other
than green) with copper
conductor
Insulated wire (other
than green) with silver
conductor
*Note: When parallel wire (SPT
1 & SPT 2) are used. The neutral
wire is square shaped or ridged
and the other wire will be round
in shape or smooth (See illus.)
Neutral Wire
5) Push xture to wall carefully passing mounng screws
with holes in canopy. Make sure all wires are inside
canopy and do not get pinched between wall and canopy
of xture.
6) Thread lockup knobs[E] onto mounng screws with
lockwashers[I] and ghten to secure xture to wall.
7) Slide down the wood frame[F] into the holder above the
socket on top of the washer.
8) Carefully slide the wood frame bracket[H] onto the
wood frame to secure into place.
9) Insert recommended bulb (Not supplied).
Fixture Diagram
Parts List
[A] Mounting
Strap
[B] Outlet Box
[C] Strap
Mounting
Screws
[D] Mounting
Screws
[E] Lockup Knobs
[F] Wood Frame
[G] Canopy
[H] Wood Frame
Bracket
[I] Lockwasher
Cauons
CAUTION – RISK OF SHOCK –
Disconnect Power at the main circuit breaker panel or main
fusebox before starng and during the installaon.
WARNING:
This xture is intended for installaon in accordance
with the Naonal Electrical Code (NEC) and all local code
specicaons. If you are not familiar with code requirements,
installaon by a cered electrician is recommended.
Installaon Instrucons
E
A
C
B
G
D
F
H
I
1) Find the appropriate threaded holes on mounng
strap[A] that align with hole distance in canopy[G].
Thread mounng screws[D] into threaded holes starng
from outlet box[B] side.
2) Aach mounng strap to outlet box with strap mounng
screws[C]. The mounng strap can be adjusted to suit
posion of xture.
3) Grounding instrucons: (See Illus. a or b).
a) On xtures where mounng strap is provided with a
hole and two raised dimples, wrap ground wire from
outlet box around green ground screw, and thread
into hole.
b) On xtures where a cupped washer is provided,
aach ground wire from outlet box under cupped
washer and green ground screw, then thread into
mounng strap.
If xture is provided with ground wire, connect xture
ground wire to outlet box ground wire with wire
connector (Not provided) aer following the above steps.
Never connect ground wire to black or white power
supply wires.
GREEN GROUND
SCREW
CUPPED
WASHER
OUTLET BOX
GROUND
FIXTURE
GROUND
DIMPLES
WIRE CONNECTOR
OUTLET BOX
GROUND
GREEN GROUND
SCREW
FIXTURE
GROUND
a
b
Installaon Instrucons (connued)
IS-44218-US
Estamos aquí para ayudarle 866-558-5706
Horario: Lunes-Viernes 9am a 5pm EST (hora ocial del este)
4) Haga les conexiones de los alambres (No se proveen los
connectores.) La tabla de referencia de abajo indica las
conexiones correctas y los alambres correspondientes.
Conectar el alambre de
suministro negro o rojo al
Conectar el alambre de
suministro blanco al
Negro Blanco
*Cordon paralelo (redondo
y liso)
*Cordon paralelo (cuadrado
y estriado)
Claro, marrón, amarillio
o negro sin hebra
idencadora
Claro, marrón, amarillio
o negro con hebra
idencadora
Alambre aislado (diferente
del verde) con conductor
de cobre
Alambre aislado (diferente
del verde) con conductor
de plata
*Nota: Cuando se uliza alambre
paralelo (SPT 1 y SPT 2). El alambre
neutro es de forma cuadrada o
estriada y el otro alambre será
de forma redonda o lisa. (Vea la
ilustracíón).
Hilo Neutral
5) Empuje el aparato hacia la pared, pasando
cuidadosamente los tornillos de montaje a través de los
oricios en el chapetón. Conrme que todos los cables
estén dentro del chapetón y que el borde del chapetón no
los presione contra la pared.
6) Enrosque las perillas de retención [E] en los tornillos de
montaje con arandelas de seguridad [I] y apriételas para
jar el aparato a la pared.
7) Deslice hacia abajo el marco de madera [F] en el soporte
sobre el zócalo en la parte superior de la lavadora.
8) Deslice con cuidado el soporte del basdor de madera
[H] en el marco de madera para asegurarlo en su lugar.
9) Inserte la bombilla recomendada (No suministrada).
Diagrama de Accesorios
Lista de Partes
Precauciones
PRECAUCIÓN – RIESGO DE DESCARGA ELÉCTRICA –
Desconecte la electricidad en el panel principal del
interruptor automáco o caja principal de fusibles antes de
comenzar y durante la instalación.
ADVERTENCIA:
Este accesorio está desnado a la instalación de
acuerdo con el Naonal Electrical Code (NEC) y todas las
especicaciones del código local. Si no está familiarizado
con los requisitos del código, la instalación se recomienda
un electricista cercado.
Instrucciones de Instalación
[A] Correa de
Montaje
[B] Caja de Salida
[C] Tornillos de
Fijación de la
Correa
[D] Tornillos de
Montaje
[E] Perillas de
Retención
[F] Marco de
Madera
[G] Campana
[H] Bastidor de
Madera
[I] Arandelas de
Seguridad
E
A
C
B
G
D
F
H
I
1) Encuentre los oricios roscados apropiados en la correa de
montaje[A] que se alinean con la distancia del oricio en la
campana[G]. Enrosque los tornillos de montaje[D] en los
oricios roscados a parr del lado de la caja de salida[B].
2) Fije la correa de montaje a la caja de salida con los
tornillos de jación de la correa[C]. La correa de montaje
se puede ajustar para adaptarse a la posición del aparato.
3) Instrucciones de conexión a erra solamente para los
Estados Unidos. (Vea la ilustracion a o b).
a) En las lámparas que enen el eje, de montaje con un
agujero y dos hoyuelos realzados, enrollar el alambre
a erra de la caja tomacorriente alrededor del tornillo
verde y pasarlo por el aquiero.
b) En las lámparas con una arandela acopada, jar el
alambre a erra de la caja tomacorriente del ajo de la
arandela acoada y tornillo verde, y paser por el eje
de montaje.
Si la lámpara viene con alambre a erra, conecter el
alambre a erra de la lámpara al alambre a erra de la caja
tomacorriente con un conector de alambres (No incluido)
espués de seguir los pasos anteriores. Nunca conectar el
alambra a erra a los alambres eléctros negro o blanco.
ARANDELA
CONCAVA
TIERRA DE LA
CAJA DE SALIDA
TORNILLO DE TIERRA,
VERDE
DEPRESIONES
TIERRA
ARTEFACTO
CONECTOR DE ALAMBRE
TIERRA DE LA
CAJA DE SALIDA
TORNILLO DE TIERRA,
VERDE
TIERRA
ARTEFACTO
a
b
Instrucciones de instalación (connuación)
  • Page 1 1
  • Page 2 2

Kichler Lighting 44218CLP User manual

Brand
Kichler Lighting
Model
44218CLP
Type
User manual

Kichler Lighting 44218CLP is a lighting fixture designed for indoor use. It comes with a mounting strap, outlet box, and a variety of screws and knobs for easy installation. The fixture can be adjusted to suit the position of the fixture and the mounting strap can be adjusted to fit the position of the outlet box. The fixture is intended for installation in accordance with the National Electrical Code (NEC) and all local code specifications. It supports a variety of wire types, including parallel cord, insulated wire, and clear, brown, gold, or black wire.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents