Kichler Lighting 45946CH User manual

Type
User manual

Kichler Lighting 45946CH is a versatile and stylish lighting fixture that can be used in a variety of indoor settings. With its adjustable mounting strap, this fixture can be mounted on walls or ceilings, making it ideal for use in hallways, bedrooms, living rooms, and more. The fixture's glass shade is available in a variety of finishes, allowing you to choose the perfect look for your décor. Kichler Lighting 45946CH is also easy to install, with all the necessary hardware included.

Kichler Lighting 45946CH is a versatile and stylish lighting fixture that can be used in a variety of indoor settings. With its adjustable mounting strap, this fixture can be mounted on walls or ceilings, making it ideal for use in hallways, bedrooms, living rooms, and more. The fixture's glass shade is available in a variety of finishes, allowing you to choose the perfect look for your décor. Kichler Lighting 45946CH is also easy to install, with all the necessary hardware included.

IS-45946-US
We’re here to help 866-558-5706
Hrs: M-F 9am to 5pm EST
4) Make wire connecons. Reference chart below for correct
connecons and wire accordingly.
Connect Black or Red
Supply Wire to:
Connect White Supply
Wire to:
Black White
*Parallel cord (round &
smooth)
*Parallel cord (square &
ridged)
Clear, Brown, Gold or
Black without Tracer
Clear, Brown, Gold or Black
with Tracer
Insulated wire (other
than green) with copper
conductor
Insulated wire (other
than green) with silver
conductor
*Note: When parallel wire (SPT
1 & SPT 2) are used. The neutral
wire is square shaped or ridged
and the other wire will be round
in shape or smooth (Aee illus.)
Neutral Wire
5) Push xture to wall carefully passing mounng screws
with holes in canopy. Note: Fixture can be mounted with
glass in the up or down posion. Make sure all wires are
inside canopy and do not get pinched between wall and
canopy of xture.
6) Thread lockup knobs[F] onto mounng screws and
ghten to secure xture to wall.
7) Carefully raise glass[G] to the xture. Slip the smaller
opening over the socket and t the glass against the
socket cover.
8) Thread the socket ring[H] onto the socket. Tighten
socket ring to secure glass in place. (DO NOT over
ghten.)
9) Insert recommended bulb (Not supplied).
Fixture Diagram
Parts List
[A] Mounting
Strap
[B] Canopy
[C] Mounting
Screws
[D] Outlet Box
[E] Strap
Mounting
Screws
[F] Lockup Knobs
[G] Glass
[H] Socket Ring
Installaon Instrucons
Cauons
CAUTION – RISK OF SHOCK –
Disconnect Power at the main circuit breaker panel or main
fusebox before starng and during the installaon.
Warning:
This xture is intended for installaon in accordance
with the Naonal Electrical Code (NEC) and all local code
specicaons. If you are not familiar with code requirements,
installaon by a cered electrician is recommended.
Installaon Instrucons (connued)
B
G
A
C
H
D
F
E
1) Find the appropriate threaded holes on mounng
strap[A] that align with hole distance in canopy[B].
Thread mounng screws[C] into threaded holes starng
from outlet box[D] side.
2) Aach mounng strap to outlet box with strap mounng
screws[E]. The mounng strap can be adjusted to suit
posion of xture.
3) Grounding instrucons: (See Illus. a or b).
a) On xtures where mounng strap is provided with a
hole and two raised dimples, wrap ground wire from
outlet box around green ground screw, and thread
into hole.
b) On xtures where a cupped washer is provided,
aach ground wire from outlet box under cupped
washer and green ground screw, then thread into
mounng strap.
If xture is provided with ground wire, connect xture
ground wire to outlet box ground wire with wire
connector (Not provided) aer following the above steps.
Never connect ground wire to black or white power
supply wires.
GREEN GROUND
SCREW
CUPPED
WASHER
OUTLET BOX
GROUND
FIXTURE
GROUND
DIMPLES
WIRE CONNECTOR
OUTLET BOX
GROUND
GREEN GROUND
SCREW
FIXTURE
GROUND
a
b
IS-45946-US
Estamos aquí para ayudarle 866-558-5706
Horario: Lunes-Viernes 9am a 5pm EST (hora ocial del este)
4) Haga les conexiones de los alambres (no se proveen los
connectores.) La tabla de referencia de abajo indica las
conexiones correctas y los alambres correspondientes.
Conectar el alambre de
suministro negro o rojo al
Conectar el alambre de
suministro blanco al
Negro Blanco
*Cordon paralelo (redondo
y liso)
*Cordon paralelo (cuadrado
y estriado)
Claro, marrón, amarillio
o negro sin hebra
idencadora
Claro, marrón, amarillio
o negro con hebra
idencadora
Alambre aislado (diferente
del verde) con conductor
de cobre
Alambre aislado (diferente
del verde) con conductor
de plata
*Nota: Cuando se uliza alambre
paralelo (SPT 1 y SPT 2). El alambre
neutro es de forma cuadrada o
estriada y el otro alambre será
de forma redonda o lisa. (Vea la
ilustracíón).
Hilo Neutral
5) Empuje el aparato hacia la pared, pasando
cuidadosamente los tornillos de montaje a través de
los oricios en el chapetón. Nota: El accesorio se puede
montar con vidrio en la posición hacia arriba o hacia
abajo. Conrme que todos los cables estén dentro del
chapetón y que el borde del chapetón no los presione
contra la pared.
6) Enrosque las perillas de sujeción[F] en los tornillos de
montaje y apriete para asegurar el artefacto a la pared.
7) Levantar con cuidado el vidrio[G] al aparato. Deslice la
abertura más pequeña sobre el bulbo y ajuste el cristal
contra el zócalo.
8) Enrosque el anillo de toma[H] en el zócalo. Apriete el
anillo de socket para asegurar el vidrio en su lugar. (NO
apriete demasiado.)
9) Inserte la bombilla recomendada (No suministrada).
Diagrama de Accesorios
Lista de Partes Instrucciones de instalación (connuación)
[A] Abrazadera
De Montaje
[B] Escudete
[C] Tornillos De
Montaje
[D] Caja De Salida
[E] Tornillos De
La Correa De
Montaje
[F] Perillas De
Sujeción
[G] Vidrio
[H] Anillo de
Toma
Instrucciones de Instalación
Precauciones
PRECAUCIÓN – RIESGO DE DESCARGA ELÉCTRICA –
Desconecte la electricidad en el panel principal del
interruptor automáco o caja principal de fusibles antes de
comenzar y durante la instalación.
ADVERTENCIA:
Este accesorio está desnado a la instalación de
acuerdo con el Naonal Electrical Code (NEC) y todas las
especicaciones del código local. Si no está familiarizado
con los requisitos del código, la instalación se recomienda
un electricista cercado.
1) Encuentre los oricios roscados apropiados en la correa
de montaje[A] que se alinean con la distancia del oricio
en la campana[B]. Enrosque los tornillos de montaje[C]
en los oricios roscados a parr del lado de la caja de
salida[D].
2) Fije la correa de montaje a la caja de salida con los tornillos
de jación de la correa[E]. La correa de montaje se puede
ajustar para adaptarse a la posición del aparato.
3) Instrucciones de conexión a erra solamente para los
Estados Unidos. (Vea la ilustracion a o b).
a) En las lámparas que enen el eje, de montaje con
un agujero y dos hoyuelos realzados, enrollar el
alambre a erra de la caja tomacorriente alrededor
del tornillo verde y pasarlo por el aquiero.
b) En las lámparas con una arandela acopada, jar el
alambre a erra de la caja tomacorriente del ajo de
la arandela acoada y tornillo verde, y paser por el
eje de montaje.
Si la lámpara viene con alambre a erra, conecter el
alambre a erra de la lámpara al alambre a erra de la
caja tomacorriente con un conector de alambres (No
incluido) espués de seguir los pasos anteriores. Nunca
conectar el alambra a erra a los alambres eléctros
negro o blanco.
ARANDELA
CONCAVA
TIERRA DE LA
CAJA DE SALIDA
TORNILLO DE TIERRA,
VERDE
DEPRESIONES
TIERRA
ARTEFACTO
CONECTOR DE ALAMBRE
TIERRA DE LA
CAJA DE SALIDA
TORNILLO DE TIERRA,
VERDE
TIERRA
ARTEFACTO
a
b
B
G
A
C
H
D
F
E
  • Page 1 1
  • Page 2 2

Kichler Lighting 45946CH User manual

Type
User manual

Kichler Lighting 45946CH is a versatile and stylish lighting fixture that can be used in a variety of indoor settings. With its adjustable mounting strap, this fixture can be mounted on walls or ceilings, making it ideal for use in hallways, bedrooms, living rooms, and more. The fixture's glass shade is available in a variety of finishes, allowing you to choose the perfect look for your décor. Kichler Lighting 45946CH is also easy to install, with all the necessary hardware included.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages