Features
•
Compression molded from our exclusive solid Vikrell
®
material
•
Gentle sloping back, neck, and armrest in bath
design
•
Bath and integral apron eliminates installation step
•
Tongue-and-groove 4-piece modular design allows for
easy ″snap together″ installation
•
Durable high-gloss finish
•
10-year consumer/3-year commercial limited warranty
•
3″ (7.6 cm) wainscot/tile ledge
•
16″ (40.6 cm) bath depth (floor to top of threshold)
•
60-1/4″ (153 cm) x 37-1/2″ (95.3 cm) x 73-1/4″
(186.1 cm) complete unit rough-in dimensions include
flange
•
60″ (152.4 cm) x 36″ (91.4 cm) x 72″ (182.9 cm)
complete unit finished dimensions
Codes/Standards Applicable
Specified model meets or exceeds the following:
•
ANSI Z124.1.2
•
HUD, UM Bulletin 73A
•
NAHB Research Foundation, Inc.
•
ASTM E162
•
ASTM E662
•
CSA B45
36″ (91.4 cm) OVAL BATH AND WALL
SURROUND
71100110
ALSO 71100120, 71100310, 71100320
Colors/Finishes
•
0: White
•
Other: Refer to Price Book for additional colors/finishes
Specified Model
Model Complete Unit Description Colors/Finishes
71100110 36″ (91.4 cm) oval bath and wall surround, left drain ❑ 0 ❑ Other_____
71100120 36″ (91.4 cm) oval bath and wall surround, right drain ❑ 0 ❑ Other_____
71100310 36″ (91.4 cm) oval bath and wall surround, 3 pack, left drain ❑ 0 ❑ Other_____
71100320 36″ (91.4 cm) oval bath and wall surround, 3 pack, right drain ❑ 0 ❑ Other_____
Model Wall Component Description Colors/Finishes
71102100 Back wall ❑ 0 ❑ Other_____
71103110 Left end wall ❑ 0 ❑ Other_____
71103120 Right end wall ❑ 0 ❑ Other_____
71104100 Complete wall set ❑ 0 ❑ Other_____
71105100 End wall set ❑ 0 ❑ Other_____
ENSEMBLETM
Page 1 of 2
1020184-4-
G
For more information
visit SterlingPlumbing.com
or call 1-800-STERLING
Technical Information
Fixture*:
Basin area:
Bathing well 40″ (101.6 cm) x 21″ (53.3 cm)
Top area 52″ (132.1 cm) x 29″ (73.7 cm)
To overflow:
Water depth 11″ (27.9 cm)
Capacity 40 gal (151.4 L)
* Approximate measurements for comparison only.
Model door maximum
width
door maximum
height
All 58-1/2″ (148.6 cm) 56-1/2″ (143.5 cm)
Installation Notes
Install this product according to the installation guide.
Size the drain cutout to fit the drain assembly that will be
used.
End stud positioning is critical if apron nailing-in flanges are to
be used.
Studs should be positioned roughly as shown.
60" (152.4 cm)
1-1/2" (3.8 cm)
3-1/2" (8.9 cm)
30" (76.2 cm)
Drain Cutout
2" (5.1 cm) D. Drain
3-1/8" (7.9 cm)
16"
(40.6 cm)
14"
(35.6 cm)
14"
(35.6 cm)
6" (15.2 cm)
(Typical)
37-1/2"
(95.3 cm)
17-1/4"
(43.8 cm)
8-3/4"
(22.2 cm)
8-3/4"
(22.2 cm)
4"
(10.2 cm)
8"
(20.3 cm)
24-1/2"
(62.2 cm)
37-1/2"
(95.3 cm)
36"
(91.4 cm)
1-1/4"
(3.2 cm)
73-1/4"
(186.1 cm)
53"
(134.6 cm)
3"
(7.6 cm)
16"
(40.6 cm)
19"
(48.3 cm)
20"
(50.8 cm)
Overflow
Detail
60-1/8" (152.7 cm) Min
60-1/4" (153 cm) Max
Product Diagram
ENSEMBLETM
ENSEMBLETM 36″ (91.4 cm) OVAL BATH AND WALL SURROUND
Page2of2
1020184-4-
G
Features
•
CleanCoat
TM glass coating
•
Heavy-duty, anodized aluminum-framed glass doors
•
Out-of-plumb adjustability allows for easy installation
•
Aluminum components extruded from alloy 6063-T5
•
Reversible top track can be installed with either the
round or flat side facing out
•
Stainless steel hardware prevents rusting or corrosion
•
1/4″ (6 mm) thick tempered glass
•
Two through-the-glass towel bars, located both inside
and outside, enhance appearance and usability
•
Frameless design highlights bathing area
Codes/Standards Applicable
Specified model meets or exceeds the following:
•
ANSI Z97.1 (tempered glass)
•
16 CFR Part 1201
FRAMELESS BYPASS BATH/
SHOWER DOOR
5400 Series
Colors/Finishes
•
Refer to the Price Book for current frame finish and glass
options
Specified Model
Model A (Max Width)* B (Height)* C (Walk Through Max)*
5405-59** 59-5/8″ (151.4 cm) 58-1/16″ (147.5 cm) 27-7/8″ (70.8 cm)
5425-57** 57″ (144.8 cm) 55-1/2″ (141 cm) 26-5/8″ (67.6 cm)
5425-59** 59-5/8″ (151.4 cm) 55-1/2″ (141 cm) 27-7/8″ (70.8 cm)
5475-48** 47-5/8″ (121 cm) 70-1/16″ (178 cm) 21-7/8″ (55.6 cm)
5475-59** 59-5/8″ (151.4 cm) 70-1/16″ (178 cm) 27-7/8″ (70.8 cm)
* Note: Consult the diagram on the next page for the location of the measurements.
** Note: Add appropriate frame color/finish code to the end of the unit model # when ordering.
FINESSETM
Page 1 of 2
1058857-4-
F
For more information
visit SterlingPlumbing.com
or call 1-800-STERLING
C
B
A
1-7/8"
(4.8 cm)
2-1/2"
(6.4 cm)
2-1/2"
(6.4 cm)
2"
(5.1 cm)
1-7/8"
(4.8 cm)
Product Diagram
FINESSETM
FINESSETM FRAMELESS BYPASS BATH/ SHOWER DOOR
Page2of2
1058857-4-
F
/
