Datalogic LT-03X Quick Reference Manual

Type
Quick Reference Manual

This manual is also suitable for

Matrix 450™ + LT-03X
QUICK REFERENCE GUIDE
NOTE
This manual illustrates a Stand Alone application. For other types of
installations, such as ID-NET™, and for a complete reader configuration using
the VisiSet™ configuration program, refer to the Matrix 450™ Reference
Manual available on the mini-DVD and also downloadable from the Web at
www.automation.datalogic.com.
821000250
MATRIX 450™ QUICK REFERENCE GUIDE
2
UPDATES AVAILABILITY
UK/US
The latest drivers and documentation updates for this product are available on Internet.
Log on to: www.automation.datalogic.com
I
Su Internet sono disponibili le versioni aggiornate di driver e documentazione di questo
prodotto. Collegarsi a: www.automation.datalogic.com
F
Les versions mises à jour de drivers et documentation de ce produit sont disponibles sur
Internet. Cliquez sur : www.automation.datalogic.com
D
Im Internet finden Sie die aktuellsten Versionen der Treiber und Dokumentation von
diesem Produkt. Adresse : www.automation.datalogic.com
E
En Internet están disponibles las versiones actualizadas de los drivers y documentación
de este producto. Dirección Internet : www.automation.datalogic.com
SERVICES AND SUPPORT
Datalogic provides several services as well as technical support through its website. Log on to
www.automation.datalogic.com and click on the links indicated for further information:
PRODUCTS
Search through the links to arrive at your product page which describes specific Info, Features,
Applications, Models, Accessories, and specific Downloads.
DOWNLOAD > PRODUCT LITERATURE > SW&UTILITIES
The VisiSet™
utility program, which allows device configuration using a PC can be downloaded
from this page. It provides RS232 and Ethernet interface configuration.
SERVICE
- Overview
- Technical Support, Maintenance Agreements and Warranty Extensions
- Repair Centers
- Helpdesk
- Material Return Authorization
LEGAL NOTICES
© 2012 Datalogic Automation S.r.l. ALL RIGHTS RESERVED. Protected to the fullest extent under
U.S. and international laws. Copying, or altering of this document is prohibited without express written
consent from Datalogic Automation S.r.l.
Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many countries,
including the U.S.A. and the E.U.
Matrix 450, ID-NET, VisiSet and X-PRESS are trademarks of Datalogic Automation S.r.l. All other
brand and product names mentioned herein are for identification purposes only and may be
trademarks or registered trademarks of their respective owners.
Datalogic shall not be liable for technical or editorial errors or omissions contained herein, nor for
incidental or consequential damages resulting from the use of this material.
MATRIX 450™ QUICK REFERENCE GUIDE
3
STEP 1 – ASSEMBLE THE READER
The first step to perform is to assemble the accessories that make up the Matrix 450™
reader. The lens and lighting system or external illuminator must be used. This procedure
shows an LT-03x lighting system.
CAUTION
Matrix 450™ must be disconnected from the power supply during this
procedure.
1. In a dust-free environment, remove the Matrix 450™ Lens Cover by unscrewing it.
CAUTION
Do not touch the sensor aperture, lens glass or lens cover glass. These
areas must be kept clean. Avoid any abrasive substances that might
damage these surfaces during cleaning.
2. Remove the sensor protection label by pulling it off of the base.
3. Mount the LNS-12xx lens by slowly screwing it onto the base until it arrives at the
mechanical stop.
NOTE
The lens mount is equipped with a special slip mechanism and together
with the LT-03x design facilitates the focusing procedure during installation,
for example if the locking knobs on the lens are obstructed by the body of
the illuminator. See note in Step 4 "Focusing the Reader" or Step 8.
Figure 1 – Assembling Matrix 450™ and LNS-12xx Lens
NOTE
The anti-vibration components are already mounted to all Datalogic
LNS-12xx Lenses.
4. To keep dust and dirt off of the lens during mounting, temporarily replace the lens cover.
Locking Knobs Lens Cover
anti-vibration components
(see note below)
Protective Film
(remove before calibration)
Matrix 450™ Base
MATRIX 450™ QUICK REFERENCE GUIDE
4
Figure 2 – Assembling Matrix 450™ to LT-03x
NOTE
The mating bracket can be mounted in the reverse direction to create a
compact version of the Matrix 450™ + LT-03x assembly. The compact
assembly however will reduce access to the lens for the focusing procedure.
REQUIRED ACCESSORIES
The following table shows the correct lens/illuminator combinations to be used for Matrix
450™ imager assembly.
Lenses Illuminators
93ACC0041 LNS-1216
16 mm C-Mount Lens 5MP
with anti-vibration components
93A400034 LT-032 ULTRA POWER LT NARROW BLUE 40°
93A400032 LT-030
ULTRA POWER LT SUPERNARROW
BLUE 20°
93A400033 LT-031
ULTRA POWER LT SUPERNARROW
WHITE 20°
93ACC0034 LNS-1225
25 mm C-Mount Lens 5MP
with anti-vibration components
93A400034 LT-032 ULTRA POWER LT NARROW BLUE 40°
93A400032 LT-030 ULTRA POWER LT SUPERNARROW
BLUE 20°
93ACC0035 LNS-1235
35 mm C-Mount Lens 5MP
with anti-vibration components
93A400033 LT-031 ULTRA POWER LT SUPERNARROW
WHITE 20°
93A400032 LT-030 ULTRA POWER LT SUPERNARROW
BLUE 20°
93ACC0036 LNS-1250
50 mm C-Mount Lens 5MP
with anti-vibration components
93A400033 LT-031 ULTRA POWER LT SUPERNARROW
WHITE 20°
MATRIX 450™ QUICK REFERENCE GUIDE
5
STEP 2 – CONNECT THE SYSTEM
In the typical standalone layout shown in the figure below a serial host is connected to the
Matrix 450™ + LT-03x. The reader operates in One Shot or Phase Mode and can use an
external trigger to signal image acquisition.
The CBX is used to facilitate the connection between the Matrix 450™ + LT-03x assembly
and the serial host interface, external trigger, serial aux configuration, and optional input and
output devices.
Matrix 450™ Standalone Layout to Serial Host
Power Supply Connection
Use the PG-120 power Kit (3 versions for European, UK or US plug) and CAB-PG-0002
+ BA400 connector to connect the PG-120 to the CBX. An alternative power supply to the
PG-120 is the PWR-120.
CBX Connection
Use CAB-LP-0x to supply power from the CBX to the LT-03x. Connect Brown/White
wires to Vdc and Black/Blue wires to GND. Connect the cable shield to Earth ground.
Use CAB-MS0x between Matrix 450™ and the CBX for: power, serial host, external
trigger device (photocell), serial aux, additional I/O connections.
Optionally: use the CAB-GE0x for the Gigabit Ethernet connection towards a remote host
or Datalogic WebSentinel™ monitoring station.
Matrix 450™ LT-03x Connection
Use the CAB-LD-102 (no power) cable (provided with the LT-03x), to connect the
communication signals between the Matrix 450™ and the LT-03x while isolating the
power. Through the CBX internal power switch you can control power to the Matrix 450™
independently from the LT-03x.
NOTE
Matrix 450™ does not support sourcing power towards the CBX in order to
power I/O devices. These devices must be powered through the CBX or
from an external source.
CAB-GE0x (to Remote Host or
Datalogic WebSentinel™ Monitor)
CAB-PG-0002
+ BA400
CAB-MS0x
CAB-LP-0x
CAB-LD-102
(no power)
Serial Host
PG-120
Ext. Trigger
CBX500
AUX (Matrix 450™
configuration)
I/O
MATRIX 450™ QUICK REFERENCE GUIDE
6
Alternatively, Matrix 450™ + LT-03x can be connected directly to an Ethernet host through
the Gigabit Ethernet connection (CAB-GE0x). If an external trigger is not necessary, the
layout is simplified. The LT-03x is powered directly from the PG-120 through the CAB-PG-
0105 cable. The CAB-LD-002 (with power) cable (provided with the LT-03x), is used to
supply power to the Matrix 450™ from the LT-03x.
Matrix 450™ Standalone Layout to Ethernet Host
Matrix 450™ + LT-03x can also be used in an ID-NET™ Master/Slave configuration. See the
Matrix 450™ Reference Manual for details, including power supply recommendations.
NOTE
If using separate power sources for LT-03x and Matrix 450™, make sure
that LT-03x is powered up before Matrix 450™ in order to be correctly
recognized.
CAB-GE0x
CAB-PG-0105
CAB-LD-002
(with power)
PG-120
Ethernet Host
(Data collection +
Matrix 450™ configuration)
MATRIX 450™ QUICK REFERENCE GUIDE
7
CBX100/CBX500 Pinout for Matrix 450™
The table below gives the pinout of the CBX100/CBX500 terminal block connectors. Use this
pinout when the Matrix 450™ reader is connected by means of the CBX100/CBX500:
CBX100/500 Terminal Block Connectors
Input Power Outputs
Vdc Power Supply Input Voltage + +V Power Source - Outputs
GND Power Supply Input Voltage - -V Power Reference - Outputs
Earth Protection Earth Ground O1+ Output 1 +
O1- Output 1 -
Inputs
O2+ Output 2 +
+V Power Source – External Trigger O2- Output 2 -
I1A External Trigger A (polarity insensitive)
Auxiliary Interface
I1B External Trigger B (polarity insensitive) TX Auxiliary Interface TX
-V Power Reference External Trigger RX Auxiliary Interface RX
+V Power Source – Inputs SGND Auxiliary Interface Reference
I2A Input 2 A (polarity insensitive)
ID-NET™
I2B Input 2 B (polarity insensitive) REF Network Reference
-V Power Reference – Inputs ID+ ID-NET™ network +
Shield
ID- ID-NET™ network -
Shield Network Cable Shield
Main Interface
RS232 RS485 Full-Duplex RS485 Half-Duplex
TX TX+ RTX+
RTS TX- RTX-
RX *RX+
CTS *RX-
SGND SGND SGND
* Do not leave floating, see Reference Manual for connection details.
CAUTION
Do not connect GND, SGND and REF to different (external) ground
references. GND, SGND and REF are internally connected through filtering
circuitry which can be permanently damaged if subjected to voltage drops
over 0.8 Vdc.
MATRIX 450™ QUICK REFERENCE GUIDE
8
STEP 3 – MOUNT AND POSITION THE READER
1. To mount the Matrix 450™ + LT-03x assembly, use the L-shaped mounting bracket to
obtain the most suitable position for the reader. The most common mounting
configurations are shown in the figure below. Other mounting solutions are provided in
the Matrix 450™ Reference Manual.
Figure 3 –Positioning with LT-03x L-shaped Mounting Bracket
CAUTION
Do not mount the Matrix 450™ + LT-03x assembly with the Matrix 450™
body mounting bracket accessory. The body mounting bracket is not
designed to support the LT-03x.
2. When mounting the Matrix 450™ + LT-03x assembly, take into consideration these three
ideal label position angles: Pitch or Skew 10° to 20° and Tilt 0°, although the reader can
read a code at any tilt angle. Assure at least 10° Pitch or Skew to avoid direct illuminator
light reflection which will reduce performance.
3. Refer to the Reading Diagrams to determine the correct reading distance according to
your application requirements.
NOTE
Rapid Configuration of the Matrix 450™ reader can be made either through
the X-PRESS™ interface (steps 4-6) which requires no PC connection, or
by using the VisiSet™ Setup Wizard (steps 7-8). Select the procedure
according to your needs.
Both the X-PRESS™ interface and the VisiSet™ Setup Wizard are easy setup methods valid
for single code applications with uniform labels that do not require reading at the extreme
ends of the reading ranges shown in the diagrams.
For advanced applications including those that operate at the extreme ends of the reading
ranges, use the VisiSet™ Calibration Tool. See the Help On Line for more details.
Pitch
Tilt
Pitch
Tilt
MATRIX 450™ QUICK REFERENCE GUIDE
9
STEP 4 – FOCUS THE READER
Matrix 450™ provides a built-in tool called Blue Diamonds™ to aid focusing the reader. The
Blue Diamonds™ are accessed through the X-PRESS™ Interface.
1. Remove the lens cover in order to focus the reader.
2. Prepare the correct accessory lens for your application:
NOTE
Once the lens is fully tightened to the mechanical stop (Step 1), it can be
rotated counterclockwise (up to one full turn without loosening the lens), so
that the diaphragm scale and locking knobs can be easily accessed from
behind the LT-03x.
a. Remove the anti-vibration o-ring from the two Locking Knobs on the lens and loosen
them.
b. Adjust the Focus ring to the "Far position" and the Diaphragm ring to the "F2.8"
number setting which is the preferred setting for installation using the X-PRESS™
interface.
3. Power the reader on. During the reader startup (reset or restart phase), all the LEDs
blink for one second. On the connector side of the reader near the cable, the “POWER
ON” LED (blue) indicates the reader is correctly powered.
4. Enter the Focus function by pressing and holding the X-PRESS™ push button until the
Focus LED is on.
Figure 4 – X-PRESS™ Interface: Focus Function
5. Release the button to enter the Focus function. The Blue Diamonds™ and laser pointers
turn on.
NOTE
If the reading surface is too dark, in order to increase the contrast, it may be
helpful to place a piece of white paper at the Blue Diamonds™ positions to
see them better.
The procedure is as follows:
a. At the correct reading distance
(see the Reading Diagrams in this Quick Reference
Guide), adjust the Focus ring towards the "Near position" until the Blue Diamonds™
are perfectly in focus, see Figure 5.
b. At long focal distances a "skew" angle may cause a noticeable difference in focus
between the two diamonds, in this case select the best possible focus (both diamonds
slightly out of focus). Tighten the Focus Locking Knob.
c. Set the Diaphragm to the aperture stop (F-number) stated in the conditions relative to
the selected reading diagram and then tighten the Diaphragm Locking Knob.
d. Replace the anti-vibration o-ring onto the two Locking Knobs.
NOTE
If necessary you can use the Fine Focusing Tool in the VisiSet™ Setup
Wizard for fine focusing. See Step 8.
READY
SETUP
FOCUS
TEST LEARN
GOODTRIGGERCOM STATUS
red yellow yellow green green
MATRIX 450™ QUICK REFERENCE GUIDE
10
Figure 5 – Focus Function Using Blue Diamonds™
6. Exit the Focus function by pressing the X-PRESS™ push button once. The Blue
Diamonds™ turn off.
7. Replace the lens cover, screwing it tightly to the base.
STEP 5 – CALIBRATE IMAGE DENSITY
In order to function correctly to the fullest extent of its capabilities, Matrix 450™ must acquire
information regarding image density or PPI (pixels per inch). This calibration takes place
through the X-PRESS™ Interface and the Focusing and PPI Setup Chart included in the
package. This procedure is necessary for the first time installation, if the lens type is changed
or if the focal distance is changed.
Locate
1. Enter the Focus function by pressing and holding the X-PRESS™ push button until the
Focus LED is on.
2. Release the button to enter the Focus function. The Blue Diamonds™ and laser pointers
turn on.
Figure 6 – X-PRESS™ Interface: Locate Function
3. From the Focusing and PPI Setup Chart, position the 1 mm code at the center of the
Horizontal FOV (aligned with the laser pointers).
Figure 7 –Aligning the Focusing and PPI Setup Chart Using Laser Pointers as Reference
4. Exit the Focus function by pressing the X-PRESS™ push button once. The Blue
Diamonds™ and laser pointers turn off.
Your reader can have one of the
above types of Blue Diamonds™.
Blue Diamond™
in focus
FOV
READY
SETUP
FOCUS
TEST LEARN
GOODTRIGGERCOM STATUS
red yellow yellow green green
MATRIX 450™ QUICK REFERENCE GUIDE
11
Setup
5. Enter the Setup function by pressing and holding the X-PRESS™ push button until the
Setup LED is on.
Figure 8 – X-PRESS™ Interface: Setup Function
6. Release the button to enter the Setup function. The Setup LED will blink until the
procedure is completed.
The Setup procedure ends when the Image Acquisition parameters are successfully saved
in the reader memory, the Setup LED will remain on continuously and Matrix 450™ emits
3 high pitched beeps.
If the calibration cannot be reached after a timeout of about 5 (five) seconds Matrix 450™
will exit without saving the parameters to memory, the Setup LED will not
remain on
continuously but it will just stop blinking. In this case Matrix 450™ emits a long low pitched
beep.
7. Exit the Setup function by pressing the X-PRESS™ push button once.
Learn
8. Enter the Learn function by pressing and holding the X-PRESS™ push button until the
Learn LED is on.
Figure 9 – X-PRESS™ Interface: Learn Function
9. Release the button to enter the Learn function. The Learn LED will blink until the
procedure is completed.
The Learn procedure ends when the Image Density value is successfully saved in the
reader memory, the Learn LED will remain on continuously, the Green Spot is activated
and Matrix 450™ emits 3 high pitched beeps.
If the calibration cannot be reached after a timeout of about 3 (three) minutes Matrix 450™
will exit without saving the parameters to memory, the Learn LED will not
remain on
continuously but it will just stop blinking. In this case Matrix 450™ emits a long low pitched
beep.
10. Exit the Learn function by pressing the X-PRESS™ push button once.
READY
SETUP
FOCUS
TEST LEARN
GOODTRIGGERCOM STATUS
red yellow yellow green green
READY
SETUP
FOCUS
TEST LEARN
GOOD TRIGGERCOM STATUS
red yellow yellow green green
MATRIX 450™ QUICK REFERENCE GUIDE
12
STEP 6 – X-PRESS™ CONFIGURATION
Once Matrix 450™ has calibrated image density, you can configure it for optimal code
reading relative to your application.
Locate
1. Enter the Focus function by pressing and holding the X-PRESS™ push button until the
Focus LED is on.
Figure 10 – X-PRESS™ Interface: Locate Function
2. Release the button to enter the Focus function. The Blue Diamonds™ and laser pointers
turn on.
3. Select a code from your application. Position the code at the center of the Horizontal
FOV (aligned with the laser pointers).
4. Exit the Focus function by pressing the X-PRESS™ push button once. The Blue
Diamonds™ and laser pointers turn off.
Setup
5. Enter the Setup function by pressing and holding the X-PRESS™ push button until the
Setup LED is on.
Figure 11 – X-PRESS™ Interface: Setup Function
6. Release the button to enter the Setup function. The Setup LED will blink until the
procedure is completed.
The Setup procedure ends when the Image Acquisition parameters are successfully saved
in the reader memory, the Setup LED will remain on continuously and Matrix 450™ emits
3 high pitched beeps.
If the calibration cannot be reached after a timeout of about 5 (five) seconds Matrix 450™
will exit without saving the parameters to memory, the Setup LED will not
remain on
continuously but it will just stop blinking. In this case Matrix 450™ emits a long low pitched
beep.
7. Exit the Setup function by pressing the X-PRESS™ push button once.
READY
SETUP
FOCUS
TEST LEARN
GOODTRIGGERCOM STATUS
red yellow yellow green green
READY
SETUP
FOCUS
TEST LEARN
GOOD TRIGGERCOM STATUS
red yellow yellow green green
MATRIX 450™ QUICK REFERENCE GUIDE
13
Learn
8. Enter the Learn function by pressing and holding the X-PRESS™ push button until the
Learn LED is on.
Figure 12 – X-PRESS™ Interface: Learn Function
9. Release the button to enter the Learn function. The Learn LED will blink until the
procedure is completed.
The Learn procedure ends when the Image Processing and Decoding parameters are
successfully saved in the reader memory, the Learn LED will remain on continuously, the
Green Spot is activated and Matrix 450™ emits 3 high pitched beeps
1
.
If the autolearning cannot be reached after a timeout of about 3 (three) minutes Matrix
450™ will exit without saving the parameters to memory, the Learn LED will not
remain on
continuously but it will just stop blinking. In this case Matrix 450™ emits a long low pitched
beep.
10. Exit the Learn function by pressing the X-PRESS™ push button once.
NOTE
If you have used this procedure to configure Matrix 450™ go to step 9.
RESET READER TO FACTORY DEFAULT (OPTIONAL)
If it ever becomes necessary to reset the reader to the factory default values, you can
perform this procedure by holding the X-PRESS™ push button pressed while powering up
the reader. You must keep the X-PRESS™ push button pressed until the power up
sequence is completed (several seconds) and all LEDs blink simultaneously 3 times.
All LEDs remain on for about one second, then off for one second, the Configuration and
Environmental parameters are reset, and the status LED remains on. If connected through a
CBX500 with display module, the message "Default Set" is shown on the display.
1
The Learn procedure will not recognize Pharmacode symbologies.
READY
SETUP
FOCUS
TEST LEARN
GOODTRIGGERCOM STATUS
red yellow yellow green green
MATRIX 450™ QUICK REFERENCE GUIDE
14
STEP 7 – INSTALLING VISISET™ CONFIGURATION PROGRAM
VisiSet
is a Datalogic reader configuration tool providing several important advantages:
Setup Wizard for rapid configuration and new users;
Defined configuration directly stored in the reader;
Communication protocol independent from the physical interface allowing the reader to
be considered as a remote object to be configured and monitored.
To install VisiSet™, turn on the PC that will be used for the configuration, running
Windows: 98/2000, NT 4.0+SP4 or later, XP, Vista or 7, then insert the VisiSet™ Mini-
DVD, wait for the CD to autorun and follow the installation procedure.
This configuration procedure assumes a laptop computer, running VisiSet™, connected to
either the reader's auxiliary serial port (through the CBX) or to the reader's on-board Ethernet
port (previously configured using the programming barcode procedure).
After installing and running the VisiSet™ software program the following window appears:
Figure 13 - VisiSet™ Opening Window
Set the communication parameters from the "Options" menu. Then select "Connect", the
following window appears:
Figure 14 - VisiSet™ Main Window After Connection
MATRIX 450™ QUICK REFERENCE GUIDE
15
STEP 8 – CONFIGURATION USING SETUP WIZARD
The Setup Wizard option is advised for rapid configuration or for new users. It allows reader
configuration in a few easy steps.
1. Select the Setup Wizard button from the Main menu.
2. Remove the lens cover and prepare the correct accessory lens for your application:
NOTE
Once the lens is fully tightened to the mechanical stop (Step 1), it can be
rotated counterclockwise (up to one full turn without loosening the lens), so
that the diaphragm scale and locking knobs can be easily accessed from
behind the LT-03x.
a. Remove the anti-vibration o-ring from the two Locking Knobs on the lens and loosen
them.
b. Adjust the Focus ring to the "Far position" and the Diaphragm ring to the "F4"
number setting which is the preferred setting for installation using the VisSet™ Setup
Wizard.
c. Place the Focusing and PPI Setup Chart in front of the reader at the correct reading
distance (see the Reading Diagrams in this Quick Reference Guide).
MATRIX 450™ QUICK REFERENCE GUIDE
16
3. Press the "Positioning" button. The reader continuously acquires images and gives
visual feedback in the view image window. Move the Focusing Pattern to center it on the
X-axis reference line at the center of the FOV and on the four delimiters (red points) in
the acquired images which indicate the region in which the calibration algorithm is active.
See figure below.
Press the Positioning button again to stop positioning.
4. Select a Calibration Mode choice and press the "Calibrate" button. The reader flashes
once acquiring the image and auto determines the best exposure and gain settings. If
the code symbology is enabled by default, the code will also be decoded.
3
4
5
MATRIX 450™ QUICK REFERENCE GUIDE
17
5. Press the "Fine Focusing" button to activate the Fine Focusing Tool.
The reader continuously acquires images and gives visual feedback on the focusing
quality in the Focusing Tool window.
NOTE
In the Focusing Tool window, use the Zoom feature to make Fine Tuning
easier.
a. Rotate the Focusing ring on the lens. The
Current Focus Quality Bar (green)
together with the vertical optimal focus
line (green) increase together until the
optimal focus is reached; the vertical
optimal focus line stops.
b. Continue rotating the Focusing ring on
the lens a little farther; the Current
Focus Quality Bar decreases (red) see
middle figure.
c. Rotate the Focusing ring in the opposite
direction. The Current Focus Quality Bar
(green) increases towards the vertical
optimal focus line (green) until the
optimal focus is reached; the Current
Focus Quality Bar touches the
vertical optimal focus line (indicating
the best focus) see bottom figure.
d. Tighten the Focus Locking Knob on the
lens.
e. Set the Diaphragm to the aperture stop
(F-number) stated in the conditions
relative to the selected reading diagram
and then tighten the Diaphragm Locking
Knob.
f. Replace the anti-vibration o-ring onto the
two Locking Knobs.
g. Replace the lens cover, screwing it
tightly to the base.
h. Press the "Close" button to return to the
Setup Wizard.
MATRIX 450™ QUICK REFERENCE GUIDE
18
6. From the Focusing and PPI Setup Chart, select the 1 mm code and position it at the
center of the Horizontal FOV (aligned with the laser pointers).
a. Select a Calibration Mode choice and press the "Calibrate" button.
b. Select a Code Setting Mode choice and press the "Code Setting" button.
This step performs image density calibration in order for Matrix 450™ to function correctly
and to the fullest extent of its capabilities. The Setup Result section of the Setup Wizard
window shows the code type results and the image density calibration settings.
6
MATRIX 450™ QUICK REFERENCE GUIDE
19
7. Substitute the Focusing and PPI Setup Chart with the application specific code,
placing it in front of the reader at the same reading distance, then repeat step 6a and 6b.
8. Select a Saving Options choice and press the
"Save" button.
9. Close the Setup Wizard.
NOTE
If your application has been configured using the VisiSet™ Setup Wizard,
your reader is ready. If necessary you can use VisiSet™ for advanced
reader configuration.
Setup Result
6
MATRIX 450™ QUICK REFERENCE GUIDE
20
STEP 9 – TEST MODE
Use a code suitable to your application to test the reading performance of the system.
1. Enter the Test function by pressing and holding the X-PRESS™ push button until the
Test LED is on.
2. Release the button to enter the Test function.
Once entered, the Bar Graph on the five LEDs is activated and when codes are placed
in the reading area (FOV), the Bar-Graph shows the Good Read Rate. In case of no
read condition, only the STATUS LED is on and blinks.
Figure 15 – X-PRESS™ Interface: Test Function
3. To exit the Test, press the X-PRESS™ push button once.
NOTE
By default, the Test exits automatically after three minutes.
The Bar Graph has the following meaning:
READY
SETUP
FOCUS
TEST LEARN
GOOD TRIGGERCOM STATUS
red yellow yellow green green
READY
SETUPFOCUSTEST LEARN
GOOD TRIGGER COM STATUS
20% 40% 60% 75% 95%
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32

Datalogic LT-03X Quick Reference Manual

Type
Quick Reference Manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI