2. Lifetime
  3. 90029

Lifetime 90029 Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the Lifetime 90029 Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
MODEL N° 90029
OWNER’S MANUAL
Keep this Identification Number in case you must contact our Customer Service Department.
COPY
2
REGISTER YOUR LIFETIME PRODUCT TODAY!
LIFETIME’S PROMISE TO YOU:
We invite you to read our privacy policy at www.lifetime.com
REGISTER today!
There are benefi ts to registering your Lifetime product. With our new online product registration form, it’s fast and easy! Register with us at www.lifetime.com
and enjoy these great benefi ts:
s2ECEIVEEXCLUSIVEMONEYSAVINGOFFERSFROM"UY,IFETIMECOMOURONLINESTOREASWELLAS.%7PRODUCTNOTIlCATIONSANDSPECIALCLOSEOUT
PROMOTIONS
s)NTHEUNLIKELYEVENTOFAPRODUCTRECALLORSAFETYMODIlCATIONWEWILLNOTIFYYOU
s2EGISTERINGYOURPRODUCTGUARANTEESYOUWARRANTYSERVICE)FYOUDONOTREGISTERYOURPRODUCTYOURWARRANTYRIGHTSWILLNOTBEDIMINISHED
"UTYOUWILLNEEDTOPROVIDEASALESRECEIPTTOVERIFYYOURPRODUCTPURCHASEDATEBEFOREWARRANTYSERVICEWILLBEPROVIDED
Maintaining your privacy is our long-standing policy at Lifetime. And you can rest assured that Lifetime will not sell or provide your
personal data to other third parties, or allow them to use your personal data for their own purposes.
WARNING
To ensure your safety, do not attempt to assemble this
system without reading and following all instructions
carefully. Identify and inventory the parts using the Parts
List. Failure to comply with any of the warnings in these
instructions may result in serious personal injuries such as
cuts, broken bones, nerve damage, paralysis, brain injury,
or death. Failure to comply may also result in property
damage. Please heed all warnings and cautions.
Save this instruction in the event that the manufacturer has to be contacted for replacement parts.
**U.S. and Canada customers ONLY**
)&!33)34!.#%)3.%%$%$
DO NOT CONTACT THE STORE!
CALL OUR CUSTOMER SERVICE DEPARTMENT at 1 (800) 225-3865
(/523AMTOPM-ONDAYTHROUGH&RIDAY-OUNTAIN3TANDARD4IME
#ALLORVISITOUR7EBSITEFOR3ATURDAYHOURS
&ORCUSTOMERSOUTSIDETHE53OR#ANADAPLEASECONTACTTHESTOREFORASSISTANCE
Most injuries are caused by misuse and/or not following instructions. Use caution when using this system.
4OENSURESAFETYDONOTATTEMPTTOASSEMBLETHISSYSTEMWITHOUTFOLLOWINGTHEINSTRUCTIONSCAREFULLY#HECKENTIREBOXANDINSIDEALLPACKING
MATERIALFORPARTSANDORADDITIONALINSTRUCTIONMATERIAL"EFOREBEGINNINGASSEMBLYREADTHEINSTRUCTIONSANDIDENTIFYPARTSUSINGTHEHARDWARE
IDENTIlERANDPARTSLISTINTHISDOCUMENT0ROPERANDCOMPLETEASSEMBLYUSEANDSUPERVISIONAREESSENTIALFORPROPERORIENTATIONANDTOREDUCE
THERISKOFACCIDENTORINJURY!HIGHPROBABILITYOFSERIOUSINJURYEXISTSIFTHISSYSTEMISNOTINSTALLEDMAINTAINEDANDOROPERATEDPROPERLY
FAILURE TO FOLLOW THESE WARNINGS MAY RESULT IN SERIOUS INJURY OR PROPERTY
DAMAGE AND WILL VOID WARRANTY.
s)FUSINGALADDERDURINGASSEMBLYUSEEXTREMECAUTION
s4WOCAPABLEADULTSARERECOMMENDEDFORTHISOPERATION
s#HECKBASEDAILYFORLEAKAGE,EAKSMAYCAUSESYSTEMTOFALL
s!SSEMBLETHEPOLESECTIONSPROPERLY&AILURETODOSOCOULDCAUSETHEPOLESECTIONSTOSEPARATEDURINGPLAYORTRANSPORT
SAFETY INSTRUCTIONS
INSTRUCTION N° 1059644 B 3/07/2011
COPY
3
This area is located at the top, left-hand
corner of the page and indicates which tools
and hardware are needed to complete the
assembly steps on a page.
This area is located at the top, right-hand
corner of the page and shows an image of the
product with shaded parts indicating which
section is being assembled.
SEC
#
Note:
!
Refer to the following areas throughout the instructions
to assist in the assembly process:
This area is usually located in the bottom,
left-hand corner of a step and indicates that
special attention is needed to perform a
particular part of a step.
These areas are usually located in the bottom,
right-hand corner of a step and indicate that
damage to the product or serious injury may
occur if the caution or warning is not heeded.
WARNING
ASSEMBLY GUIDES
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
CAUTION
4
! +EEP THE HARDWARE BAGS AND THEIR CONTENTS SEPARATE )F ANY PARTS ARE MISSING CALL OUR #USTOMER 3ERVICE
$EPARTMENT
" 4ESTlTALL"OLTSBYINSERTINGTHEMINTOTHEIRRESPECTIVEHOLES)FNECESSARYCAREFULLYSCRAPEAWAYANYEXCESS
POWDERCOATINGBUILDUPFROMINSIDETHEHOLES$ONOTSCRAPEAWAYALLOFTHEPOWDERCOATING"AREMETALMAY
RUST9OUMAYNEEDTOPOUNDSOME"OLTSINTOPLACEWITHAHAMMERORMALLET
Phillips
Screwdriver
(1)
Funnel
Safety Glasses
(1)
7/16”
(2)
Scrap Wood
(1)
SandWater Source
BQB-Ball Pump
& Needle
(145 lbs. (66 kg))
*Two adults required to complete assembly*
PARTS & HARDWARE LIST
ID DESCRIPTION QTY
!,' 0OLE3ECTION 
!:- "ASE 
!:8 "ASE0LATE 
!:4 "ALL2OPE#LASP!SSEMBLY 
"1" "ALL0UMPAND.EEDLE 
BUG TETHERBALL HARDWARE BAG [1055356]
!:5 vXv-ETAL3PACER 
!!3 vXv(EX"OLT 
!:0 v.YLOCK.UT 
!:7 vXv#ARRIAGE"OLT 
!:1 v%XPANDING0OLE#AP 
!:2 v0OLE#AP7EDGE 
"5& 7ASHER#OLLAR,INK 
!"$ v&LAT7ASHER 
!94 v(EX.UT 
!:6 vXv0HILLIPS3CREW 
!:9 "ASE0LUG 
!:3 3PLIT#OLLAR 
"#! 4OP#AP 
TOOLS & MATERIALS REQUIRED
BEFORE BEGINNING ASSEMBLY
(1 for each person)
Pressure Gauge
5
Tools & Materials not included unless otherwise indicated
(1, included)
5
MISCELLANEOUS PARTS
0ARTSNOTSHOWNTOSCALE
PARTS IDENTIFIER
ALGX
0OLE3ECTION
AZMX
"ASE
AZXX
"ASE0LATE
AZTX
"ALL2OPE#LASP!SSEMBLY
BFAX
"ALL.EEDLE
INCLUDEDWITH"1""ALL0UMP
BQBX
"ALL0UMP
!CTUALPUMPMAYDIFFERFROMONESHOWNHERE
.OTTOSCALE
.OTTOSCALE
6
HARDWARE IDENTIFIER
BUG - TETHERBALL HARDWARE BAG [1055356]
0ARTSSHOWNATACTUALSIZE
AZSX
3PLIT#OLLAR
AASX
vXv(EX"OLT
BCHX
vXv0HILLIPS3CREW
AZWX
vXv#ARRIAGE"OLT
ABDX
v&LAT7ASHER
BUFX
7ASHER#OLLAR,INK
AZQX
v%XPANDING0OLE#AP
AZYX
"ASE0LUG
BCAX
4OP#AP
AZRX
v0OLE#AP7EDGE
AZUX
vXv-ETAL3PACER
AYTX
v(EX.UT
AZPX
v.YLOCK.UT
7
POLE ASSEMBLY
HARDWARE REQUIRED
PARTS REQUIRED
TOOLS USED (NOT INCLUDED)
SEC
1
ALGX
0OLE3ECTION
Part not shown to scale
NO HARDWARE REQUIRED FOR THIS SECTION
Scrap Wood
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
8
SEC
POLE ASSEMBLY
1
SEC
1.1
SEC
1.2
)NSERTTHETAPEREDENDOFAPole Section (ALG) into
THEmAREDENDOFANOTHER0OLE3ECTION
0LACETHEmAREDENDOFTHETHIRD0OLE
3ECTIONOVERTHETAPEREDENDOFTHE
0OLE3ECTIONSYOUASSEMBLEDIN3TEP

Note: All Pole Sections are the same. The order of assembly
makes no difference.
!
NO HARDWARE REQUIRED FOR THIS SECTION
ALG
ALG
ALG
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
9
SEC
1
)NORDERTOSEATTHE0OLE3ECTIONSSTRIKEEACHENDOFTHE0OLE!SSEMBLYVERYHARDlVETOSIXTIMESONAPIECEOFSCRAP
WOODORCARDBOARD
SEC
1.3
ATTENTION: THIS STEP CANNOT BE REVERSED!
WARNING
The Poles must be seated together! Poles must be struck
on a hard surface fi ve to six times! Failure to seat the
Poles correctly could allow the Poles to separate during
use, which could lead to serious personal injuries or
property damage.
WARNING
$ONOTHITYOURFEETWITHTHE0OLE3ECTIONSAS
SERIOUSINJURYCOULDOCCUR
NO HARDWARE REQUIRED FOR THIS SECTION
Scrap Wood
10
POLE TO BASE ASSEMBLY
HARDWARE REQUIRED
PARTS REQUIRED
TOOLS USED (NOT INCLUDED)
SEC
2
Parts not shown to scale
Parts shown to scale
AASX
vXv(EX"OLT
AZWX
vXv#ARRIAGE"OLT
AZUX
vXv-ETAL3PACER
AZPX
v.YLOCK.UT
AZMX
"ASE
AZXX
"ASE0LATE
7/16” Wrench (x2)Safety Glasses
AZSX
3PLIT#OLLAR
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
11
SEC
2
SEC
2.1
SEC
2.2
4URNTHEBase (AZM)ONITSSIDEANDSLIDETHEmAREDENDOFTHEPole Assembly THROUGHTHEHOLEINTHE "ASE!LIGNTHE
TABSOFTHEBase Plate (AZX)WITHTHEHOLESONTHEmAREDENDOFTHE0OLE!SSEMBLY
AZM
AZX
AAS
AZP
AZU
7ITHTHEHOLESINTHETABSOFTHE"ASEALIGNEDWITHTHEHOLESINTHE0OLE!SSEMBLYSECURETHE"ASE0LATETOTHE
0OLE!SSEMBLYUSINGTHEHARDWARESHOWN4IGHTENNut (AZP)SECURELY
AASX
7/16” (x2)
AZUX
AZPX
POLE TO BASE ASSEMBLY
WARNING
Do not place the system in an upright position until
instructed. The system may fall over and could result in
serious personal injury or property damage.
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
12
SEC
2
)NTERLOCKTHETWOHALVESOFTHESplit Collar (AZS)AROUNDTHE0OLE!SSEMBLY
3LIDE3PLIT#OLLARDOWNTOTHE"ASE
SEC
2.3
SEC
2.4
AZS
AZS
AZSX
.OTTO3CALE
WARNING
Do not place the system in an upright position until
instructed. The system may fall over and could result in
serious personal injury or property damage.
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
13
SEC
2
SEC
2.5
SEC
2.6
)NSERTTHETWO1/4”-20 x 5 1/2” Carriage Bolts (AZW)THROUGHTHEHOLESINTHE3PLIT#OLLARANDOUTTHROUGHTHE"ASE
Plate.
7ITHTHEHOLESINTHETABSOFTHE"ASEALIGNEDWITHTHEHOLESINTHE0OLE!SSEMBLYSECURETHE"ASE0LATETOTHE
0OLE!SSEMBLYWITHTWO1/4”-20 Nylock Nuts (AZP)4IGHTEN.UTS SECURELYBUTDONOTOVERTIGHTEN
AZP
AZP
AZW
AZW
Note: You will need to align the holes in the Split Collar with the
holes in the Base Plate.
!
AZWX
(Not To Scale)
5 1/2”
AZPX
7/16”
WARNING
Do not place the system in an upright position until
instructed. The system may fall over and could result in
serious personal injury or property damage.
14
ABDX
v&LAT7ASHER
BUFX
7ASHER#OLLAR,INK
AYTX
v(EX.UT
TETHERBALL TO POLE ASSEMBLY
HARDWARE REQUIRED
PARTS REQUIRED
TOOLS USED (NOT INCLUDED)
SEC
3
Parts shown to scale
Phillips Screwdriver
Safety Glasses
*AZTX
"ALL2OPE#LASP!SSEMBLY
AZQX
v%XPANDING0OLE#AP
AZRX
v0OLE#AP7EDGE
Part not shown to scale
BCHX
vXv0HILLIPS3CREW
BCAX
4OP#AP
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
15
SEC
3
#ONNECTTHEWasher Collar Link (BUF)Expanding Pole Cap (AZQ)ANDPole Cape Wedge (AZR)TOGETHERUSINGTHE5/16” x 3 1/2” Phillips
Screw (BCH)5/16” Flat Washer (ABD)AND5/16” Hex Nut (AYT).(ANDTIGHTENTHE.UTJUSTENOUGHTOSECUREITINSIDETHE0OLE#AP
7EDGE
SEC
3.1
ABDX
BUFX
AYTX
TETHERBALL TO POLE ASSEMBLY
BCH
ABD
BCA
BUF
AZQ
AZR
AYT
BCH X
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
16
SEC
3
SEC
3.2
SEC
3.3
)NSERTTHE%XPANDING0OLE#AP!SSEMBLYINTOTHETOPOFTHE0OLE!SSEMBLY
3ECURETHE%XPANDING0OLE#AP!SSEMBLYTOTHETOPOFTHE0OLEBYTIGHTENINGTHE0HILLIPS(EAD"OLT
NO HARDWARE REQUIRED FOR THIS SECTION
WARNING
Do not place the system in an upright position until
instructed. The system may fall over and could result in
serious personal injury or property damage.
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
17
SEC
!TTACHTHEBall/Rope/Clasp Assembly (AZT)TOTHE7ASHER#OLLAR,INK
SEC
3.4
3
NO HARDWARE REQUIRED FOR THIS SECTION
AZT
WARNING
Do not place the system in an upright position until
instructed. The system may fall over and could result in
serious personal injury or property damage.
18
AZYX
"ASE0LUG
Water Source
FILLING THE BASE
HARDWARE REQUIRED
PARTS REQUIRED
TOOLS USED (NOT INCLUDED)
SEC
4
Part shown to scale
Safety Glasses
(145 lbs (66 kg)) Sand
NO HARDWARE REQUIRED FOR THIS SECTION
Funnel
BFAX
"ALL.EEDLE
Ball Pump Pressure Gauge
5
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
19
SEC
4
SEC
4.1
TWO ADULTS ARE REQUIRED TO COMPLETE ASSEMBLY. TO PREVENT SERIOUS INJURIES, THE POLE SHOULD BE
HELD BY ONE ADULT AT ALL TIMES WHILE THE BASE IS BEING FILLED.
OPTION A: FILLING WITH SAND
LBSKGOFSANDREQUIRED
A #OMPLETELYlLLTHE"ASEWITHSAND3HAKE"ASEFREQUENTLYTOGETTHESANDTOSETTLE9OUMAYNEEDTOTILTTHE
"ASEDURINGlLLINGTOCOMPLETELYlLL"ASEWITHSAND
B )NSERTTHEBase Caps (AZY)INTOTHElLLHOLES
c. Using two adults, carefully stand the system up on a smooth surface.
WARNING
For safety reasons, we recommend that sand be used
instead of water to fi ll the Base. If a leak develops, water
could run out unnoticed, allowing the system to fall over,
resulting in serious personal injuries, or property damage.
If using Water, check the Base carefully for leaks. If a
leak is found, lay the system down on the ground and
call Customer Service. Do not use, stand up, or play on
a leaking system.
AZYX
TOOLS AND HARDWARE REQUIRED FOR THIS PAGE
20
SEC
WARNING
For safety reasons, we recommend that sand be used
instead of water to fi ll the Base. If a leak develops, water
could run out unnoticed, allowing the system to fall over,
resulting in serious personal injuries, or property damage.
If using Water, check the Base carefully for leaks. If a
leak is found, lay the system down on the ground and
call Customer Service. Do not use, stand up, or play on
a leaking system.
4
TWO ADULTS ARE REQUIRED TO COMPLETE ASSEMBLY. TO PREVENT SERIOUS INJURIES, THE POLE SHOULD BE
HELD BY ONE ADULT AT ALL TIMES WHILE THE BASE IS BEING FILLED.
OPTION B: FILLING WITH WATER
A !DDCOLDWATERUPTOTHElLLHOLELEAVINGTWOINCHESOFSPACEATTHETOPFOREXPANSION
B !DDONETABLESPOONOFCHLORINEBLEACHTOTHEWATERTOPREVENTALGAEFORMATION
C )NSERTTHEBase Caps (AZY)INTOTHElLLHOLES
d. Using two adults, carefully stand the system up on a smooth surface.
SEC
4.1
AZYX
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/