Supermicro AOC-STGS-i1T User manual

Brand: Supermicro

Model: AOC-STGS-i1T

Category: Networking cards

Type: User manual

USER’S GUIDE

Revision 1.1

AOC-STGS-i2T

AOC-STGS-i1T

The information in this User’s Guide has been carefully reviewed and is believed to be accurate. The vendor assumes

no responsibility for any inaccuracies that may be contained in this document, and makes no commitment to update

or to keep current the information in this User's Guide, or to notify any person or organization of the updates. Please

Note: For the most up-to-date version of this user's guide, please see our website at www.supermicro.com.

Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product described in this

User's Guide at any time and without notice. This product, including software and documentation, is the property of

Supermicro and/or its licensors, and is supplied only under a license. Any use or reproduction of this product is not

allowed, except as expressly permitted by the terms of said license.

IN NO EVENT WILL Super Micro Computer, Inc. BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,

SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO USE THIS PRODUCT

OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER

MICRO COMPUTER, INC. SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED

OR USED WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING,

INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of Santa Clara County in the

State of California, USA. The State of California, County of Santa Clara shall be the exclusive venue for the resolution

of any such disputes. Supermicro's total liability for all claims will not exceed the price paid for the hardware product.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class A digital device

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the manufacturer’s instruction manual,

may cause harmful interference with radio communications. Operation of this equipment in a residential area is likely

to cause harmful interference, in which case you will be required to correct the interference at your own expense.

California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warning applies only

to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate Material-special handling may apply.

See www.dtsc.ca.gov/hazardouswaste/perchlorate”.

The products sold by Supermicro are not intended for and will not be used in life support systems, medical equipment,

nuclear facilities or systems, aircraft, aircraft devices, aircraft/emergency communication devices or other critical

systems whose failure to perform be reasonably expected to result in signicant injury or loss of life or catastrophic

property damage. Accordingly, Supermicro disclaims any and all liability, and should buyer use or sell such products

for use in such ultra-hazardous applications, it does so entirely at its own risk. Furthermore, buyer agrees to fully

indemnify, defend and hold Supermicro harmless for and against any and all claims, demands, actions, litigation, and

proceedings of any kind arising out of or related to such ultra-hazardous use or sale.

User's Guide Revision 1.1

Release Date: July 2, 2018

Unless you request and receive written permission from Super Micro Computer, Inc., you may not copy any part of this

document. Information in this document is subject to change without notice. Other products and companies referred

to herein are trademarks or registered trademarks of their respective companies or mark holders.

Printed in the United States of America

WARNING: This product can expose you to chemicals including

lead, known to the State of California to cause cancer and birth

defects or other reproductive harm. For more information, go

to www.P65Warnings.ca.gov.

Preface

About This User's Guide

This user's guide is written for system integrators, IT technicians and

knowledgeable end users. It provides information for the installation and use of the AOC-

STGS-i1T/i2T add-on card.

About This Add-On Card

The Supermicro® AOC-STGS-i1T/i2T is the most feature-rich, low power 10Gbase-T controller

in the market today. Based on the Intel® X550 AT/AT2* chipset with features such as VXLAN

and NVGRE, this add-on card offers exible connectivity for all networking requirements. The

second generation integrated 10GbE MAC+PHY drives down both cost and power, enabling

a highly cost effective deployment of 10GbE in the data center. With Supermicro Asset

management and thermal detection to provide an extra layer of security and a peace of mind,

the AOC-STGS-i1T/i2T is among the most innovative 10GbE controllers in the market It is an

excellent choice to expand network connectivity in data centers and enterprise environments.

*The X550 AT is for the AOC-STGS-i1T, and the X550 AT2 is for AOC-STGS-i2T.

Conventions Used in the Manual

Special attention should be given to the following symbols for proper installation and to prevent

damage done to the components or injury to yourself:

Warning! Indicates high voltage may be encountered when performing a procedure.

Warning! Indicates important information given to prevent equipment/property damage

or personal injury.

Important: Important information given to ensure proper system installation or to

relay safety precautions.

Note: Additional Information given to differentiate various models or provides infor-

mation for correct system setup.

Naming Convention

SMC Networking Add-on Cards

Naming Convention for SIOM Network Adapters

A O C – S T G S – i 1 T

1 – 2 3 4 –5 6 8

Character Representation Options

1st Product Family AOC: Add On Card

2nd Form Factor S: Standard, P: Proprietary, C: MicroLP,

M: Super IO Module (SIOM), MH: SIOM Hybrid

3rd Product Type/Speed G: GbE (1Gb/s), TG: 10GbE (10Gb/s), 25G: 25GbE (25Gb/s),

40G: 40GbE (40Gb/s), 50G: 50GbE (50Gb/s), 100G: 100GbE

(100Gb/s), IBE: EDR IB (100Gb/s), IBF: FDR IB (56Gb/s),

IBQ: QDR IB (40Gb/s), HFI: Host Fabric Interface

4th Chipset Model (Optional) N: Niantec (82599), P: Powerville (i350), S: Sageville (X550)

5th Chipset Manufacturer (Optional) i: Intel, m: Mellanox, b: Broadcom

6th Number of Ports 1: 1 port, 2: 2 ports, 4: 4 ports

7th Connector Type (Optional) S: SFP+/SFP28, T: 10GBase-T, Q: QSFP+, C: QSFP28

8th 2

Controller/Connector Type

(Optional)

G: GbE RJ45, S: 10G SFP+, T: 10GBase-T

Model Type Form Factor Controller Connection

Dimension

(w/o Brackets) (L x H)

Power

(W)

SGP-i2 GbE Standard LP Intel® i350 AM2 2 RJ45 (1Gb/port) 3.9” (99mm) x 2.73” (69mm) 3.5

SGP-i4 GbE Standard LP Intel® i350 AM4 4 RJ45 (1Gb/port) 3.9” (99mm) x 2.73” (69mm) 5

STG-b4S 10GbE Standard LP Broadcom® BCM57840S 4 SFP+ (10Gb/port) 5.4” (137mm) x 2.73” (69mm) 14

STG-i2T 10GbE Standard LP Intel® X540-AT2 2 RJ45 (10GBase-T) 5.9” (150mm) x

2.73” (69mm) 13

STGN-i2S 10GbE Standard LP Intel® 82599ES 2 SFP+ (10Gb/port) 4.0” (102mm) x 2.73” (69mm) 11.2

STGN-i1S 10GbE Standard LP Intel® 82598EN 1 SFP+ (10Gb/port) 4.0” (102mm) x 2.73” (69mm) 10

STG-i4S 10GbE Standard LP Intel® XL710-AM1 4 SFP+ (10Gb/port) 5.9” (150mm) x 2.73” (69mm) 8

S40G-i2Q 40GbE Standard LP Intel® XL710 AM2 2 QSFP+ (40Gb/port) 5.9” (150mm) x 2.73” (69mm) 7

PTG-i1S 10GbE Proprietary Intel® 82599EN 1 SF

P+ (10Gb/port) 10.04” (255mm) x .78” (20mm) 7.5

UG-i4 GbE UIO FH Intel® 82571EB 4 RJ45 (1Gb/port) 6.6” (167mm) x 3.9” (98mm) 10

CGP-i2 GbE MicroLP Intel® i350 AM2 2 RJ45 (1Gb/port) 4.45” (113mm) x 1.54” (39mm) 4

CG-i2 GbE MicroLP Intel® 82580 2 RJ45 (1Gb/port) 4.45” (113mm) x 1.3” (34mm) 4

CIBF-m1 FDR IB MicroLP Mellanox® ConnectX-3 1 QSFP (56Gb/port) 4.85" (123mm) x 1.54" (39mm) 7

CIBQ-m1 QDR IB MicroLP Mellanox® ConnectX-3 1 QSFP

(40Gb/port) 4.85" (123mm) x 1.54" (39mm) 7

CTG-i1S 10GbE MicroLP Intel® 82599EN 1 SFP+ (10Gb/port) 4.85" (123mm) x 1.54" (39mm) 10

CTG-i2S 10GbE MicroLP Intel® 82599ES 2 SFP+ (10Gb/port) 4.85" (123mm) x 1.54" (39mm) 11

CTG-i2T 10GbE MicroLP Intel® X540 2 RJ45 (10GBase-T) 4.8” (123mm) x 2.75” (77mm) 13

CTGS-i2T 10GbE MicroLP Intel® X550 2 RJ45 (10GBase-T) 4.45” (113mm) x 1.54” (39mm) 12

MGP-i2 GbE SIOM Intel® i350 AM2 2 RJ45 (1Gb/p

ort) 3.622" (92mm) x 3.428" (87.1mm) 3.7

MGP-i4 GbE SIOM Intel® i350 AM4 4 RJ45 (1Gb/port) 3.622" (92mm) x 3.428" (87.1mm) 4.4

MTGN-i2S 10GbE SIOM Intel® 82599ES 2 SFP+ (10Gb/port) 3.622" (92mm) x 3.428" (87.1mm) 7.2

MTG-i4S 10GbE SIOM Intel® XL710-AM1 4 SFP+ (10Gb/port) 3.622" (92mm) x 3.428" (87.1mm) 7

Networking Adapter List

AOC-STGS-i1T/i2T User's Guide

Contacting Supermicro

Headquarters

Address: Super Micro Computer, Inc.

980 Rock Ave.

San Jose, CA 95131 U.S.A.

Tel: +1 (408) 503-8000

Fax: +1 (408) 503-8008

Email: [email protected] (General Information)

[email protected] (Technical Support)

Website: www.supermicro.com

Europe

Address: Super Micro Computer B.V.

Het Sterrenbeeld 28, 5215 ML

's-Hertogenbosch, The Netherlands

Tel: +31 (0) 73-6400390

Fax: +31 (0) 73-6416525

Email: [email protected] (General Information)

[email protected] (Technical Support)

[email protected] (Customer Support)

Website: www.supermicro.nl

Asia-Pacic

Address: Super Micro Computer, Inc.

3F, No. 150, Jian 1st Rd.

Zhonghe Dist., New Taipei City 235

Taiwan (R.O.C)

Tel: +886-(2) 8226-3990

Fax: +886-(2) 8226-3992

Email: [email protected]

Website: www.supermicro.com.tw

Preface

AOC-STGS-i1T/i2T User's Guide

Table of Contents

Naming Convention .....................................................................................................................4

SMC Networking Add-on Cards ..................................................................................................4

Chapter 1 Introduction

1.1 Overview ...............................................................................................................................8

1.2 Key Features .........................................................................................................................8

1.3 Specications ........................................................................................................................9

General ................................................................................................................................9

I/O Features ........................................................................................................................9

Virtualization Features .......................................................................................................10

Remote Boot Options ........................................................................................................10

Security and Power Management .....................................................................................11

Cables Support .................................................................................................................11

Operating Conditions ........................................................................................................11

Physical Dimensions .........................................................................................................11

Weight ...............................................................................................................................11

Compliance/Environmental ................................................................................................11

Supported Platforms .........................................................................................................12

Operating System Support ................................................................................................12

Cable Support ...................................................................................................................13

Chapter 2 Hardware Components

2.1 Add-On Card Images and Layouts ....................................................................................14

2.2 Major Components .............................................................................................................16

2.3 Connectors and LEDs .......................................................................................................17

Chapter 3 Installation

3.1 Static-Sensitive Devices .....................................................................................................20

Precautions .......................................................................................................................20

Unpacking .........................................................................................................................20

3.2 Before Installation ...............................................................................................................21

3.3 Installing the Add-On Card .................................................................................................21

3.4 Installing Drivers on Windows ............................................................................................22

3.5 Installing Drivers on Linux ..................................................................................................23

Build a Binary RPM Package ............................................................................................23

3.6 Installing Drivers on FreeBSD ............................................................................................25

3.7 Returning Merchandise for Service ....................................................................................27

Preface

AOC-STGS-i1T/i2T User's Guide

Chapter 1

Introduction

1.1 Overview

Congratulations on purchasing your add-on card from an acknowledged leader in the industry.

Supermicro products are designed with the utmost attention to detail to provide you with the

highest standards in quality and performance. For product support and updates, please refer

to our website at http://www.supermicro.com/products/nfo/networking.cfm#adapter.

1.2 Key Features

• Single RJ45 connector (for i1T model) or dual RJ45 connectors (for i2T model)

• Low-Prole, Short Length Standard Form Factor

• PCI Express 3.0 x4 (8GT/s)

• Asset Management features with thermal sensor

• Intel second generation, single-port 10GbE controller 550 AT (for the i1T model), or dual-

port 10GbE controller X550 AT2 (for the i2T model) with integrated MAC and PHY

• IEEE 802.3az Energy Efcient Ethernet (EEE)

• Unied networking delivering LAN, iSCSI, and FCoE over 10GBASE-T

• VXLAN and NVGRE

• VMDq, PCI-SIG SR-IOV for Virtulization Environments

• Intel Ethernet Flow Director for hardware-based application trafc steering

• Data Center Bridging (DCB) with FCoE stateless ofoad

• Jumbo Frames support up to 15.5KB

• Time Sync IEEE1588

Chapter 1: Introduction

• NC-SI for IPMI support

• RoHS compliant 6/6

1.3 Specications

General

• Intel X550 AT/X550 AT2* 10GbE controller with integrated MAC and PHY (Note: The X550

AT is for the AOC-STGS-i1T, and the X550 AT2 is for AOC-STGS-i2T.)

• Compact size low-prole standard form factor

• PCIe interface v3.0 - 8.0 GT/s, 5.0 GT/s, and 2.5 GT/s; support for x1 and x4, links widths

(lanes)

• Single RJ45 connector (on i1T model) or dual RJ45 connectors (on i2T model) with speed

up to 10Gb/port

• Maximum power consumption: 13.1W (for AOC-STGS-i2T), 10.1W (for AOC-STGS-i1T)

I/O Features

• Intel Flow Director

• MSI-X Support

• Multiple Queues: 128 Tx and Rx Per Port

• TCP/UDP, IPv4 Checksum Ofoads

• RSS for Windows Environment Scalable I/O for Linux Environments

• IPv6 Support for IP/TCP and IP/UDP Receive Checksum Ofoad

• Tx TCP Segmentation Ofoad

• FCoE Tx/Rx CRC Ofoad

• Large FC Receive

• FCoE Transmit Segmentation Ofoads

• FCoE Coalescing and Direct Data Placement

AOC-STGS-i1T/i2T User's Guide

• Support for Packets Up to 15.5KB

• DMA Coalescing

• Flow Director Filters:

• Up to 32 Kb – Two Signature Filters

• Up to 8 Kb – Two Perfect-match Filters

• Receive Side Coalescing (RSC)

Virtualization Features

• Multi-mode I/O Virtualization Operations

• VXLAN

• NVGRE

• Virtual Machine Device Queues (VMDq)

• Next Generation VMDq

• 64 Transmit (Tx) and Receive (Rx) Queue Pairs Per Port

• Flexible Port Partitioning: 64 Virtual Functions Per Port

• Support for PCI-SIG SR-IOV Specication

• IEEE 802.1Q Virtual Local Area Network (VLAN) Support with VLAN Tag Insertion,

Stripping, and Packet Filtering for up to 4096 VLAN tags

Remote Boot Options

• Preboot eXecution Environment (PXE) Flash Interface Support

• Intel Ethernet FCoE Boot

• Intel Ethernet iSCSI Remote Boot

• Intel Boot Agent software: Linux boot via PXE or BOOTP, Windows Deployment Services,

or UEFI

Chapter 1: Introduction

Cables Support

• RJ-45 Category-6 up to 55m; Category-6A up to 100m

Operating Conditions

• Operating temperature: 0°C to 55°C (32°F to 131°F)

• Storage temperature: -40°C to 70°C (-40°F to 158°F)

• Storage humidity: 90% non-condensing relative humidity at 35°C

Physical Dimensions

• Card PCB dimensions: 15cm x 6.89cm (5.9in x 2.71in) (LxW)

• Height of end brackets: standard – 12cm (4.725in), low-prole – 8cm (3.15in)

Weight

• 120g (0.2645lb) (for AOC-STGS-i2T), 111g (0.2455lb) (for AOC-STGS-i1T)

Compliance/Environmental

• RoHS Compliant 6/6, Pb Free

Security and Power Management

• Receive Packet Filtering

• Integrated IPsec Security Engines for Ofoads of up to 1024 Security Associations(SA)

for Each Tx and Rx

• IEEE 802.3az Energy Efcient Ethernet (EEE)

• LAN Disable Function

• Anti-spoong for MAC and VLANs

AOC-STGS-i1T/i2T User's Guide

Supported Platforms

• Motherboards with minimum PCI-E x4 slot

• Server Systems with low-prole or full-height PCI-E x4 expansion slot

• NC-SI feature is only supported by Supermicro motherboards with corresponding NC-SI

connectors

Operating System Support

• Windows

7 SP1 (X64)

• Windows 8 and 8.1 (X64)

• Windows 10 (X64)

• Windows Server 2008 R2 (X64)

• Windows Server 2012 and 2012 R2 (X64)

• Windows PE 3.0 (2008 R2 PE) (IA32, X64)

• Windows PE 4.0 (2012 PE) (IA32, X64)

• Windows PE 5.0 (2012 R2 PE) (IA32, X64)

• Linux Stable Kernel Version 2.6/3.x/4.x (IA32, X64, IPF)

• Linux RHEL 6.7 (IA32, X64)

• Linux RHEL 7.1 (IA32, X64)

• Linux SLES 11 SP4 (IA32, X64, IPF)

• Linux SLES 12 (IA32, X64)

• FreeBSD 10.2 (IA32, X64)

• UEFI 2.1 (X64, IPF)

Note: This product is only available to OEM customers and is sold as an integrated

solution with Supermicro server systems.

Chapter 1: Introduction

• UEFI 2.3 (X64, IPF)

• UEFI 2.4 (X64)

• VMware ESXi 5.5 (X64)

• VMware ESXi 6.0 (X64)

Cable Support

• CBL-NTWK-0603: RJ45 CAT6A 550MHz Rated Blue 3 ft patch cable

• CBL-NTWK-0604: RJ45 CAT6A 550MHz Rated Blue 5 ft patch cable

• CBL-NTWK-0605: RJ45 CAT6A 550MHz Rated Blue 6 ft patch cable

• CBL-NTWK-0606: RJ45 CAT6A 550MHz Rated Blue 9 ft patch cable

• CBL-NTWK-0607: RJ45 CAT6A 550MHz Rated Blue 10 ft patch cable

• CBL-NTWK-0608: RJ45 CAT6A 550MHz Rated Blue 12 ft patch cable

• CBL-NTWK-0609: RJ45 CAT6A 550MHz Rated Blue 15 ft patch cable

• CBL-NTWK-0610: RJ45 CAT6A 550MHz Rated Blue 18 ft patch cable

• CBL-NTWK-0611: RJ45 CAT6A 550MHz Rated Blue 21 ft patch cable

• CBL-NTWK-0612: RJ45 CAT6A 550MHz Rated Blue 24 ft patch cable

AOC-STGS-i1T/i2T User's Guide

Chapter 2

Hardware Components

2.1 Add-On Card Images and Layouts

Note: All graphics shown in this manual were based upon the latest PCB revision

available at the time of publication of the manual. The motherboard you received may

or may not look exactly the same as the graphics shown in this manual.

The AOC-STGS-i1T Image

The AOC-STGS-i1T Layout

LAN2

LED1

JP2

JP3

JNCSI1

AOC-STGS-i1T

REV:1.00

DESIGNED IN USA

Thermal Alert status LED

LED1:

Alert

Thermal

Intel

X550

Chapter 2: Installation

Note: All graphics shown in this manual were based upon the latest PCB revision

available at the time of publication of the manual. The motherboard you received may

or may not look exactly the same as the graphics shown in this manual.

The AOC-STGS-i2T Image

The AOC-STGS-i2T Layout

LAN1

LAN2

LED1

JP2

JP3

JNCSI1

AOC-STGS-i2T

REV:1.00

DESIGNED IN USA

Thermal Alert status LED

LED1:

Alert

Thermal

Intel

X550

AOC-STGS-i1T/i2T User's Guide

2.2 Major Components

The following components are on the AOC-STGS-i1T/i2T:

1. LAN Port 1 (only available on the i2T model)

2. LAN Port 2

3. LED1

4. Intel X550 AT/AT2 10GbE Controller (Note: The X550 AT is for the AOC-STGS-i1T, and

the X550 AT2 is for AOC-STGS-i2T.)

5. NC-SI Connector

6. Power Header for NC-SI Connector

7. Thermal Alert Connector

8. S1 DIP Switch

The AOC-STGS-i1T/i2T Layout

LAN2

LED1

JP2

JP3

JNCSI1

AOC-STGS-i2T

REV:1.00

DESIGNED IN USA

Thermal Alert status LED

LED1:

Alert

Thermal

Intel

X550

LAN1

(*for i2T only)

Chapter 2: Installation

LAN Ports

One LAN port (LAN2) is located on the add-on-card. The i2T model has an additional LAN port

(LAN1). These LAN ports support connection speeds of 10Gbps. Use direct attach twinaxial

copper cables for network connections.

2.3 Connectors and LEDs

Thermal Alert LED

A thermal alert LED is located at LED1. The yellow LED indicates there is a thermal alert.

The following table shows the LED status. Refer to page 16 for the location of the LED.

Thermal Alert LED

LED Status

Color Status

Yellow Thermal Alert

Thermal Alert Connector

Connect an external cable (not included) from the motherboard to the thermal alert connector

at JP2 to monitor the temperature of this add-on card. Refer to the table below for the pin

denition. Refer to page 16 for the JP2 location.

Thermal Alert

Pin Denitiions

Pin # Denition

1 GND

2 Thermal_Alert_N

3 GND

AOC-STGS-i1T/i2T User's Guide

Power Header for NCSI

JP3 is a 5V auxiliary header used to provide additional power to the NC-SI connector.

NC-SI Power Header

Pin Denition

Pin # Denition

1 P5V_AUX

2 P5V_AUX

3 P5V_AUX

4 P5V_AUX

5 P5V_AUX

NC-SI Connector

Use the NC-SI connector at JNCSI1 for remote management. It is only supported with

Supermicro motherboards with a corresponding NC-SI connector. The NC-SI cable is included

with the motherboard. The following table is the pin denition. Refer to page 16 for the location

of the connector.

NC-SI Connector

Pin Denitions

Pin # Denition Pin # Denition

1 NCSI_CLK_IN 2 GND

3 NCSI_CRS_DV 4 GND

5 NCSI_RXD_0 6 GND

7 NCSI_RXD_1 8 GND

9 NCSI_TXD_0 10 GND

11 NCSI_TXD_1 12 GND

13 NCSI_TX_EN 14 PRESENT_N

15 NCSI_ARB_IN 16 NCSI_ARB_OUT

17 P5V_AUX 18 P5V_AUX

19 P5V_AUX 20 P5V_AUX

21 P5V_AUX 22 TP

Chapter 2: Installation

S1 DIP Switch

This DIP Switch provides SMBUS address selection. You can congure the card with static

SMBUS address. Refer to the tables below for address selections.

AOC-STGS-i1T/i2T User's Guide

Chapter 3

Installation

3.1 Static-Sensitive Devices

Electrostatic Discharge (ESD) can damage electronic com ponents. To avoid damaging your

add-on card, it is important to handle it very carefully. The following measures are generally

sufcient to protect your equipment from ESD.

Precautions

• Use a grounded wrist strap designed to prevent static discharge.

• Touch a grounded metal object before removing the add-on card from the antistatic bag.

• Handle the add-on card by its edges only; do not touch its components.

• Put the add-on card back into the antistatic bags when not in use.

• For grounding purposes, make sure that your system chassis provides excellent conduc-

tivity between the power supply, the case, the mounting fasteners and the add-on card.

Unpacking

The add-on card is shipped in antistatic packaging to avoid static damage. When unpacking

your component or system, make sure you are static protected.

Note: To avoid damaging your components and to ensure proper installation, always

connect the power cord last, and always remove it before adding, removing or chang-

ing any hardware components.

Page is loading ...

Supermicro AOC-STGS-i1T User manual

Brand: Supermicro

Model: AOC-STGS-i1T

Category: Networking cards

Type: User manual

Download PDF

report

Supermicro AOC-STGS-i1T User manual

Supermicro AOC-STGS-i1T User manual

Related papers

Other documents