Page is loading ...
babygo.uk
10 Locks 2 Keys
Magnetic Safety Lock Instructions
Extra Strong Adhesive
No screws or drilling required
Our product contains a strong magnet. Please keep away from the following
to avoid damage.
•Phones.
•Televisions.
•Credit Cards.
•Digital Storage Devices.
•Pacemakers.
Magnet Safety
Our product is designed to help with your child’s safety and is not a
substitute for adult supervision.
•Please stop using if broken or damaged.
•Check product regularly to ensure safety is maintained.
•Keep magnetic key stored away from children.
Child Safety
Our easy to install, magnetic child safety cupboard locks, give you the
confidence to allow your child to explore their surroundings, as they begin to
take their very first steps at home.
These locks work on high quality cupboard doors and drawers, up to 38mm
(1.5”) thick, helping to protect your child from injury and preventing your
valuable objects from damage.
Thank you for choosing BABYGO
2
[a] 10x Dual Setting Safety Locks
[b] 2x Magnetic Safety Key
[c] 1x Applicator
[d] 10x Safety Catches
[e] Safety Lock Stickers
[f] Spare Tape 3M
[g] Pack of Screws [Optional for
Installation]
Box Contents
S’il vous plait visitez https://www.babygo.uk/lock-manual-fr
pour télécharger les instructions en français
Bitte besuche https://www.babygo.uk/lock-manual-de
um französische Anweisungen herunterzuladen
Per favore visita https://www.babygo.uk/lock-manual-it
per scaricare le istruzioni italiane
Visite https://www.babygo.uk/lock-manual-es
para instrucciones en español
Languages
Install your child safety lock in less than 30 seconds by reading our
simple to follow step by step guide.
Or visit www.babygo.uk and watch our easy to follow installation video
guide.
How To Install
3
[d] [e] [f]
[a] [b] [c]
[g]
For best results, install your safety lock [a] vertically, with the hook facing
upwards.
Alternatively, you can install your safety lock horizontally, with the hook
facing on its side.
Safety Lock Position
Your locks [a] are complete with two settings, active and de-active.
Flick the hook upwards to activate the lock mechanism.
Flick the hook downwards to deactivate the lock mechanism.
When the hook is set to close your cupboards will function as normal.
Dual Setting Locks
4
Deactivate your lock for convenience when your little ones are not around!
Top Tip
Step 4: Open your door or drawer and:
•Assess if you will apply the applicator [c]
to the top or to the side of your
cupboard wall.
•Ensure the safety catch [d] is facing your
cupboard wall.
•Firmly apply the applicator [c] to the
edge of the cupboard wall.
Step 3: Remove the 3M tape from both the
safety catch [d] and the dual setting safety
lock [a]
Step 2: Push your dual setting safety lock
[a] into your applicator [c] Ensure the 3M
tape is facing outwards.
Step 1: Push your safety catch [d] into your
applicator [c] Ensure the 3M tape is facing
outwards.
How to Install Your Safety Lock [7 Steps]
5
Your safety lock stickers [e] are a convenient way to help you unlock your
door or drawer even quicker! Use the tape, on the back of your twist and
release holder and attach your key to a high place.
Top Tip
Step 7: Flick the hook upwards to activate
the lock mechanism on your dual setting
safety lock [a].
Installation is complete!
Step 6: Open your door or drawer and for
best results:
•Remove the applicator [c].
•Apply firm pressure for 3 seconds, to
your dual setting safety lock [a].
•Apply firm pressure for 3 seconds, to
your safety catch [d].
Step 5: Close your door or drawer for 3
seconds.
How to Install Your Safety Lock [7 Steps]
6
For help and advise on installation email help@babygo.uk.
Alternatively, see solutions to common questions overleaf.
Support
We have made keeping your magnetic safety key [b], out of the reach of
your children, even easier.
Use the tape, on the back of your twist and release holder and attach your
key to a high place.
Top Tip
Step 2: Move your magnetic safety key [b]
up and down or left and right, depending
on installation, to release the catch [d] and
open your door or drawer.
Step 5: Twist and release the holder from
your magnetic safety key [b] to open your
drawer or door.
Using Your Magnetic Safety Key [Step 2]
7
No, these are optional for those who prefer to install the safety catches using
screws for support.
Q. Do I need to use the screws in the box?
Your locks are complete with two settings, active and de-active. By default,
your locks are set to de-active.
The hooks need to be set to active for your locks to work.
Q. My cupboard doors and drawers are not locking shut?
Your magnetic safety keys are complete with holder for protection.
Twist and release the holder from the key to improve your magnetic reach.
Q. Why are my magnetic safety keys not working?
Remember to apply significant pressure.
After application, the bond strength will increase as the adhesive flows
onto the surface.
At room temperature approximately 50% of ultimate bond strength will be
achieved after 20 minutes.
90% after 24 hours and 100% after 72 hours.
Q. My safety locks are not sticking strong enough?
8
/