Elgato Ring Light User manual

Ring Light
Elgato
Brand
Elgato
Model
Ring Light
Type
User manual

This manual is also suitable for

Elgato Ring Light is a professional lighting solution designed to enhance your video conferencing, streaming, and content creation experience. With adjustable brightness and color temperature, you can achieve perfect lighting conditions for any setup. Easily controlled via Wi-Fi or onboard buttons, Ring Light eliminates shadows and flatters your features, ensuring you look your best on camera.

Elgato Ring Light is a professional lighting solution designed to enhance your video conferencing, streaming, and content creation experience. With adjustable brightness and color temperature, you can achieve perfect lighting conditions for any setup. Easily controlled via Wi-Fi or onboard buttons, Ring Light eliminates shadows and flatters your features, ensuring you look your best on camera.

GETTING
STARTED WITH
ELGATO
RING LIGHT
Attach the camera mount to Ring Light.
Rotate the clamp ratchet to secure Master
Mount S to your desk.
Turn the twist lock to adjust the height of
Master Mount S.
Connect the power supply to Ring Light and
plug it into a wall outlet.
SETTING UP RING LIGHT
3 4
5
1 2
Secure Ring Light to the 1/4 inch screw on
top of the ball head of the included Master
Mount S pole.
2/5 | Version 01 | December 15 2020
Ring Light can be controlled using either the onboard buttons, or via Wi-Fi from a PC, Mac,
Android or iOS device.
If your PC or Mac is not equipped with Wi-Fi, use the Elgato Control Center app on your iOS or
Android device to add Ring Light.
A Wi-Fi connection is only needed for initial pairing. Once paired, you can control Ring Light via
any wired or wireless device in your network.
Switch on your Ring Light. It will take
approximately 10 seconds to boot up.
Launch Control Center and pair Ring Light by
clicking the + icon.
Use Control Center to switch Ring Light on/
off, adjust brightness, and ne-tune color
temperature.
Power on Ring Light. Push and hold
the RESET button for at least 10
seconds until the light ashes 3x.
CONTROLLING RING LIGHT
4
2
3
PC/Mac setup
1
Download and install the Elgato Control
Center software - elgato.com/download
Resetting your Ring Light
3/5 | Version 01 | December 15 2020
Compatible with:
Onboard controls
• When not paired to a Wi-Fi connection, use the + and - buttons to adjust brightness and
color temperature.
• Ring Light is in Brightness mode by default. Press + and - simultaneously to enter Color
Temperature mode (Ring Light will ash twice) and repeat to enter Brightness mode
(Ring Light will ash once).
CONTROLLING RING LIGHT
4/5 | Version 01 | December 15 2020
When using Ring Light at your desk, you should position it directly behind and above your
monitor, angled towards you. An all-in-one lighting solution, Ring Light eliminates shadows
on your face and features adjustable brightness and color temperature, so you can set ideal
lighting conditions for your setup.
POSITIONING RING LIGHT
5/5 | Version 01 | December 15 2020
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

Elgato Ring Light User manual

Ring Light
Elgato
Brand
Elgato
Model
Ring Light
Type
User manual
This manual is also suitable for

Elgato Ring Light is a professional lighting solution designed to enhance your video conferencing, streaming, and content creation experience. With adjustable brightness and color temperature, you can achieve perfect lighting conditions for any setup. Easily controlled via Wi-Fi or onboard buttons, Ring Light eliminates shadows and flatters your features, ensuring you look your best on camera.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents