PC/Mac setup
Key Light is controlled via Wi-Fi from a PC, Mac, Android or iOS device.
If your PC or Mac is not equipped with Wi-Fi, use the Elgato Control Center app on your iOS or
Android device to add Key Light.
A Wi-Fi connection is only needed for initial pairing. Once paired, you can control Key Light via
any wired or wireless device in your network.
Switch on your Key Light. It will take
approximately 15 seconds to boot up.
Launch Control Center and pair Key Light by
clicking the + icon.
CONTROLLING KEY LIGHT
1
2
3
Resetting Key Light
Download and install the Elgato Control
Center software - elgato.com/download
3/4 | Version 01 | December 15 2020
Use Control Center to switch Key Light on/
off, adjust brightness and netune color
temperature.
4
Power on Key Light. Push and hold the
RESET button for at least 10 seconds
until the light ashes 3x.
Compatible with: