Nokia 2600 User Guide
9211380
Issue 1
2600_ENv1_9211380.fm Page 1 Thursday, August 7, 2008 2:47 PM
LEGAL INFORMATION
© 2008 Nokia. All rights reserved.
Nokia, Nokia Connecting People, and Navi are trademarks or registered trademarks of Nokia Corporation.
Nokia tune is a sound mark of Nokia Corporation. Other product and company names mentioned herein
may be trademarks or tradenames of their respective owners.
Reproduction, transfer, distribution, or storage of part or all of the contents in this document in any form
without the prior written permission of Nokia is prohibited.
US Patent No 5818437 and other pending patents. T9 text input software Copyright (C) 1997-2008.
Tegic Communications, Inc. All rights reserved.
Includes RSA BSAFE cryptographic or security protocol software from RSA Security.
Java and all Java-based marks are trademarks or registered trademarks of Sun
Microsystems, Inc.
This product is licensed under the MPEG-4 Visual Patent Portfolio License (i) for personal and noncommercial
use in connection with information which has been encoded in compliance with the MPEG-4 Visual
Standard by a consumer engaged in a personal and noncommercial activity and (ii) for use in connection
with MPEG-4 video provided by a licensed video provider. No license is granted or shall be implied for any
other use. Additional information, including that related to promotional, internal, and commercial uses,
may be obtained from MPEG LA, LLC. See http://www.mpegla.com
.
Nokia operates a policy of ongoing development. Nokia reserves the right to make changes and
improvements to any of the products described in this document without prior notice.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, UNDER NO CIRCUMSTANCES SHALL NOKIA
OR ANY OF ITS LICENSORS BE RESPONSIBLE FOR ANY LOSS OF DATA OR INCOME OR ANY SPECIAL,
INCIDENTAL, CONSEQUENTIAL OR INDIRECT DAMAGES HOWSOEVER CAUSED.
THE CONTENTS OF THIS DOCUMENT ARE PROVIDED "AS IS". EXCEPT AS REQUIRED BY APPLICABLE LAW,
NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN
RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS DOCUMENT. NOKIA RESERVES THE
RIGHT TO REVISE THIS DOCUMENT OR WITHDRAW IT AT ANY TIME WITHOUT PRIOR NOTICE.
The third-party applications provided with your device may have been created and may be owned by persons
or entities not affiliated with or related to Nokia. Nokia does not own the copyrights or intellectual property
rights to the third-party applications. As such, Nokia does not take any responsibility for end-user support,
functionality of the applications, or the information in the applications or these materials. Nokia does not
provide any warranty for the third-party applications.
BY USING THE APPLICATIONS YOU ACKNOWLEDGE THAT THE APPLICATIONS ARE PROVIDED AS IS WITHOUT
WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW.
YOU FURTHER ACKNOWLEDGE THAT NEITHER NOKIA NOR ITS AFFILIATES MAKE ANY REPRESENTATIONS
OR WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO WARRANTIES OF TITLE,
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OR THAT THE APPLICATIONS WILL NOT
INFRINGE ANY THIRD-PARTY PATENTS, COPYRIGHTS, TRADEMARKS, OR OTHER RIGHTS.
2600_ENv1_9211380.fm Page 2 Thursday, August 7, 2008 2:47 PM
The availability of particular products and applications and services for these products may vary by region.
Please check with your Nokia dealer for details, and availability of language options.
Export controls
This device may contain commodities, technology or software subject to export laws and regulations from
the US and other countries. Diversion contrary to law is prohibited.
FCC NOTICE
Your device may cause TV or radio interference (for example, when using a telephone in close proximity to
receiving equipment). The FCC can require you to stop using your telephone if such interference cannot be
eliminated. If you require assistance, contact your local service facility. This device complies with part 15
of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation. Any changes or modifications not expressly approved by Nokia could void the
user's authority to operate this equipment.
9211380/Issue 1
2600_ENv1_9211380.fm Page 3 Thursday, August 7, 2008 2:47 PM
4
Contents
SAFETY.............................................. 5
General information ........................ 6
Access codes ...................................................... 6
1. Get started.................................... 7
Install the SmartChip card and battery...... 7
Charge the battery ........................................... 7
Change the front cover................................... 8
Normal operating position............................. 8
2. Your phone ................................... 8
Keys and parts ................................................... 8
Switch the phone on or off ........................... 9
Standby mode.................................................... 9
Keypad lock ..................................................... 10
3. Call functions ............................. 10
Make and answer a call............................... 10
Loudspeaker..................................................... 10
4. Write text ................................... 10
5. Menu functions.......................... 11
Mobile E-mail................................................. 11
Start e-mail.................................................. 11
View the inbox and other folders.......... 12
Write and send............................................ 12
Reply and forward...................................... 12
Delete ............................................................ 12
Preferences................................................... 12
Notification.................................................. 13
Messaging........................................................ 13
Text and multimedia message settings... 13
Text messages ............................................. 14
Multimedia messages ............................... 14
Create text or multimedia message...... 14
Instant messaging...................................... 15
Audio message............................................ 18
Voice mail ..................................................... 18
Recent calls...................................................... 18
MEdia Net ........................................................ 19
Service connection..................................... 19
Browser appearance settings.................. 19
Service inbox................................................ 20
Browser security ......................................... 20
MEdia Mall....................................................... 20
Games and Applications............................... 20
My Stuff............................................................ 20
Tones & Graphics........................................ 20
Multimedia ................................................... 21
Tools ............................................................... 22
Address book ................................................... 22
Settings............................................................. 23
Profiles........................................................... 23
Tones .............................................................. 23
Display ........................................................... 23
Time and date.............................................. 24
My shortcuts................................................ 24
Connectivity ................................................. 24
Data transfer................................................ 25
Call settings.................................................. 26
Phone settings............................................. 26
Enhancements ............................................. 26
Configuration............................................... 27
Operator menu................................................ 27
SmartChip services ........................................ 27
6. Battery and charger
information ..................................... 27
Nokia battery authentication guidelines .. 28
Care and maintenance................... 29
Additional safety information ...... 30
Index............................................... 34
2600_ENv1_9211380.fm Page 4 Thursday, August 7, 2008 2:47 PM
5
SAFETY
Read these simple guidelines. Not following them may be dangerous or illegal. Read the
complete user guide for further information.
SWITCH ON SAFELY
Do not switch the device on when wireless phone use is prohibited or when it
may cause interference or danger.
ROAD SAFETY COMES FIRST
Obey all local laws. Always keep your hands free to operate the vehicle while
driving. Your first consideration while driving should be road safety.
INTERFERENCE
All wireless devices may be susceptible to interference, which could
affect performance.
SWITCH OFF IN RESTRICTED AREAS
Follow any restrictions. Switch the device off in aircraft, near medical
equipment, fuel, chemicals, or blasting areas.
QUALIFIED SERVICE
Only qualified personnel may install or repair this product.
ENHANCEMENTS AND BATTERIES
Use only approved enhancements and batteries. Do not connect
incompatible products.
WATER-RESISTANCE
Your device is not water-resistant. Keep it dry.
■ About your device
The wireless device (type RM-341) described in this guide is approved for use on the GSM 850
and 1900 networks. Contact your service provider for more information about networks.
When using the features in this device, obey all laws and respect local customs, privacy and
legitimate rights of others, including copyrights.
Copyright protection may prevent some images, music, and other content from being copied,
modified, or transferred.
Your device may have preinstalled bookmarks and links for third-party internet sites. You may
also access other third-party sites through your device. Third-party sites are not affiliated
with Nokia, and Nokia does not endorse or assume liability for them. If you choose to access
such sites, you should take precautions for security or content.
2600_ENv1_9211380.fm Page 5 Thursday, August 7, 2008 2:47 PM
6
Remember to make back-up copies or keep a written record of all important information
stored in your device.
When connecting to any other device, read its user guide for detailed safety instructions.
Do not connect incompatible products.
Warning: To use any features in this device, other than the alarm clock, the device
must be switched on. Do not switch the device on when wireless device use may
cause interference or danger.
■ Network services
To use the phone you must have service from a wireless service provider. Many of the features
require special network features. These features are not available on all networks; other
networks may require that you make specific arrangements with your service provider before
you can use the network services. Your service provider can give you instructions and explain
what charges will apply. Some networks may have limitations that affect how you can use
network services. For instance, some networks may not support all language-dependent
characters and services.
Your service provider may have requested that certain features be disabled or not activated
in your device. If so, these features will not appear on your device menu. Your device may
also have a special configuration such as changes in menu names, menu order, and icons.
Contact your service provider for more information.
This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP protocols. Some
features of this device, such as multimedia messaging service (MMS), e-mail application,
instant messaging, remote synchronization, and accessing internet with the browser, require
network support for these technologies.
■ Enhancements
Warning: Use only batteries, chargers, and enhancements approved by Nokia for
use with this particular model. The use of any other types may invalidate any approval
or warranty, and may be dangerous.
For availability of approved enhancements, please check with your dealer. When you
disconnect the power cord of any enhancement, grasp and pull the plug, not the cord.
General information
■ Access codes
The security code supplied with the phone protects your phone against unauthorized use.
You can create and change a code, and set the phone to request the code.
2600_ENv1_9211380.fm Page 6 Thursday, August 7, 2008 2:47 PM
7
The PIN code supplied with the SmartChip card, protects the card against unauthorized use.
The PIN2 code supplied with some SmartChip cards, is required to access certain services.
If you enter the PIN or PIN2 code incorrectly three times in succession, you are asked for the
PUK or PUK2 code. If you do not have them, contact your local service provider.
The module PIN is required to access the information in the security module of your
SmartChip card. The signing PIN may be required for the digital signature. The restriction
password is required when using the call restriction service.
Select Menu > Settings > Security to set how your phone uses the access codes and
security settings.
1. Get started
■ Install the SmartChip card and battery
Always switch the device off and disconnect the charger before removing the battery.
Note: Always switch off the power and disconnect the charger and any other device
before removing the covers. Avoid touching electronic components while changing
the covers. Always store and use the device with the covers attached.
• Push the release button and remove the back cover (1) and the battery (2).
• Insert the SmartChip card (3).
• Insert the battery (4) and replace the back cover (5).
■ Charge the battery
Warning: Use only batteries, chargers, and enhancements approved by Nokia for use
with this particular model. The use of any other types may invalidate any approval
or warranty, and may be dangerous.
Check the model number of any charger before use with this device. This device is intended
for use when supplied with power from the AC-3 or AC-3U charger.
This device is intended to use the BL-5BT battery.
For availability of approved enhancements, please check with your dealer. When you disconnect
the power cord of any enhancement, grasp and pull the plug, not the cord.
2600_ENv1_9211380.fm Page 7 Thursday, August 7, 2008 2:47 PM
8
• Connect the charger to a wall outlet.
• Connect the charger to the phone as shown.
■ Change the front cover
Note: Always switch off the power and disconnect the charger
and any other device before removing the covers. Avoid touching electronic
components while changing the covers. Always store and use the device with the
covers attached.
• Press the release button and remove the back cover (1).
• Carefully remove the front cover (2, 3).
• Align the bottom of the front cover to the bottom of the
phone (4), and press the front cover to lock it into place (5).
■ Normal operating position
Your device may have internal and external antennas. As with any radio
transmitting device, avoid touching the antenna area unnecessarily while
the antenna is transmitting or receiving. Contact with such an antenna
affects the communication quality and may cause the device to operate at
a higher power level than otherwise needed and may reduce the battery life.
2. Your phone
■ Keys and parts
• Earpiece (1)
•Display (2)
• Selection keys (3)
• Navi™ key (hereinafter scroll key) (4)
• Call key (5)
• End key and power key (6)
2600_ENv1_9211380.fm Page 8 Thursday, August 7, 2008 2:47 PM
9
• Strap eyelet(7)
• Camera lens(8)
• Loudspeaker (9)
• Release button (10)
• Microphone (11)
• Headset connector (12)
• Charger connector (13)
Note: Do not touch this connector. It is intended
for use by authorized service personnel only.
Warning: The scroll key in this device may contain nickel. Continuous exposure to
nickel on the skin may lead to a nickel allergy.
■ Switch the phone on or off
To switch the phone on or off, press and hold the power key. See “Keys and parts,” p. 8.
■ Standby mode
When the phone is ready for use, before you enter any characters, the phone is in the
standby mode:
• Network signal strength (1)
• Battery charge level (2)
• Network name or the operator logo (3)
• Functions of selection keys (4)
The left selection key is Options for you to view the functions in your personal shortcut list.
When viewing the list, select Options > Select options to view the available functions that
you can add in the options list; select Organize > Move and the location to rearrange the
functions of your shortcut list.
2600_ENv1_9211380.fm Page 9 Thursday, August 7, 2008 2:47 PM
10
■ Keypad lock
Select Menu and press * quickly to lock the keypad to prevent accidental keypresses. To answer
a call when the keyguard is on, press the call key. When you end or decline the call, the keypad
remains locked. To unlock, select Unlock and press * quickly.
Select Menu > Settings > Phone settings > Automatic keyguard > On to set the keypad to
lock automatically after a preset time delay when the phone is in the standby mode.
When the device or keypad is locked, calls may be possible to the official emergency number
programmed into your device.
3. Call functions
■ Make and answer a call
To make a call, enter the phone number including the area code, if necessary. The country
code should be included, if necessary. Press the call key to call the number. Scroll right to
increase or left to decrease the volume of the earpiece or headset during the phone call.
To answer an incoming call, press the call key. To decline the call without answering, press
the end key.
■ Loudspeaker
If available, you may select Phn/Spk to use the loudspeaker or the earpiece of the phone
during a call.
Warning: Do not hold the device near your ear when the loudspeaker is in use,
because the volume may be extremely loud.
4. Write text
You can enter text in predictive text ( ) and traditional text ( ) input. To use
traditional text input, press a number key (1 to 9) repeatedly until the desired character
appears. To turn predictive text input on or off when writing, press and hold #, and select
Prediction on or Prediction off.
When using predictive text input, press each key once for a single letter. If the displayed
word is the one you want, press 0, and write the next word. To change the word, press *
repeatedly until the word you want appears. If ? is displayed after the word, the word is not in
the dictionary. To add the word to the dictionary, select Spell, enter the word (using traditional
text input), and select Save.
2600_ENv1_9211380.fm Page 10 Thursday, August 7, 2008 2:47 PM
11
Tips for writing text: to add a space, press 0. To quickly change the text input method, press #
repeatedly, and check the indicator at the top of the display. To add a number, press and hold
the desired number key. To get a list of special characters when using traditional text input,
press *; when using predictive text input, press and hold *.
5. Menu functions
The phone functions are grouped into menus. Not all menu functions or option items are
described here.
In the standby mode, select Menu and the desired menu and submenu. Select Exit or Back to
exit the current level of menu. Press the end key to return to the standby mode directly.
■ Mobile E-mail
E-mail provides access to certain common e-mail services. If you have an e-mail account
with one of the supported e-mail services, then you can use this application to access your
e-mail account. With this application you can view your inbox, compose and send e-mail,
receive e-mail, receive notification of new e-mail, and delete e-mail. This e-mail application
is different from the SMS and MMS e-mail function.
If you do not have an e-mail account already, visit the website of one of the e-mail service
providers and register for an e-mail account. If you have questions regarding the cost of
e-mail service, contact your wireless network operator.
Start e-mail
1. Select Menu > Mobile Email.
2. Highlight and select the provider with which you have an e-mail account. Alternatively,
you can select Options > Add Account and the appropriate provider from the list.
3. Read and accept the terms of use, if you are presented with any.
4. Enter your user id and password. Note that the password is case sensitive.
5. If you do not want to have your login information remembered, highlight the check box
option, and select Unmark.
6. Select Sign In.
After the account is successfully validated, it appears on the list.
If you select to have your login information remembered, when you next select that account,
the first page of your e-mail inbox view will automatically be loaded. If the login information
has not been remembered, you must login to start using your e-mail account.
2600_ENv1_9211380.fm Page 11 Thursday, August 7, 2008 2:47 PM
12
View the inbox and other folders
The inbox view will load the first page of the inbox by default. To go to the next page of the
inbox, select Next Page (the last item on the page).
To navigate from the inbox to another folder, scroll right or left. This switches the tab view
from the current folder to the next folder. Scroll to the desired folder. Stop at the desired
folder and the first page of that folder loads automatically. When folder content is loaded,
it will not be updated again until you select Options > Check for Mail.
To view an e-mail, select the e-mail. When you highlight a particular e-mail, you see an
expanded view with more details about the e-mail.
Write and send
1. To start writing an e-mail from the inbox view, select Options > Compose New.
2. Enter the recipient’s e-mail address, a subject, and the e-mail message. To select from a
list of recent e-mail addresses, select Insert.
3. Select Send to send the e-mail.
Reply and forward
1. When viewing an e-mail, select Options > Reply, Reply to All, or Forward. The e-mail view
loads with the appropriate fields completed.
2. Enter in the remaining information.
3. Select Send to send the e-mail.
Delete
To delete an e-mail from the inbox view, select Options > Delete. To mark multiple e-mails
to be deleted, select Options > Mark for Deletion. To delete marked e-mail, select Options >
Delete Marked.
To delete an e-mail you are viewing, select Delete.
Preferences
From the inbox view, select Options > Preferences to set the following preferences:
Folder Display — to view e-mails in the inbox view by their From Address or their Subject
Delete Confirmation — to be prompted with a delete confirmation or not
Message AutoExpand — to automatically expand the e-mail message in the inbox view
when it is highlighted
Exit Confirmation — to be prompted with an exit confirmation or not
Highlight and select your desired preferences. To apply your preference changes, select Save.
These preferences will be applied to all of your e-mail accounts.
2600_ENv1_9211380.fm Page 12 Thursday, August 7, 2008 2:47 PM
13
Notification
To set e-mail notifications on or off from the inbox view, select Options > Email Alerts. If e-mail
notification is enabled, you get notifications of new e-mails. This setting only applies to the
current e-mail account, and does not affect the notification settings of other e-mail accounts
in e-mail.
■ Messaging
The message services can only be used if they are supported by your network or service provider.
Note: Your device may indicate that your message was sent to the message center
number programmed into your device. Your device may not indicate whether the
message is received at the intended destination. For more details about messaging
services, contact your service provider.
Important: Exercise caution when opening messages. Messages may contain
malicious software or otherwise be harmful to your device or PC.
Text and multimedia message settings
Select Menu > Messaging > Message settings > Text messages > Message centers. If your
SmartChip card supports more than one message center, select or add the one you want to
use. You may need to get the center number from your service provider.
Select Menu > Messaging > Message settings > Multimedia and from the following:
Delivery reports > Yes — to ask the network to send delivery reports about your messages
(network service)
MMS creation mode > Restricted — to set the phone to not allow the type of content that may
not be supported by the network or the receiving device in a multimedia message. Select Free
to allow such contents, but the receiving device may not receive the message properly.
Image size (restricted) or Image size (free) — to define the size of the image you may insert
into a multimedia message when MMS creation mode is set to Restricted or Free
Default slide timing — to define the default time between slides in multimedia messages
Incoming multimedia messages — to allow the reception of multimedia messages automatically,
manually after being prompted, or to decline the reception
Allow advertisements — to choose whether you allow the reception of messages defined as
advertisements. This setting is not shown if Allow multimedia reception is set to No.
Configuration settings — to select the default service provider for retrieving picture messages.
Select Account to see the accounts provided by the service provider and to select the one you
want to use. You may receive the settings as a configuration message from the service provider.
2600_ENv1_9211380.fm Page 13 Thursday, August 7, 2008 2:47 PM
14
Text messages
Your device supports text messages beyond the limit for a single message. Longer messages
are sent as two or more messages. Your service provider may charge accordingly. Characters
with accents or other marks, and characters from some language options, take up more
space, and limit the number of characters that can be sent in a single message.
An indicator at the top of the display shows the total number of characters left and the
number of messages needed for sending. For example, 673/2 means that there are 673
characters left and that the message will be sent as a series of 2 messages.
The blinking indicates that the message memory is full. Before you can receive new
messages, delete some of your old messages.
Multimedia messages
Only devices that have compatible features can receive and display multimedia messages.
The appearance of a message may vary depending on the receiving device.
The wireless network may limit the size of MMS (multimedia messaging service) messages.
If the inserted picture exceeds this limit, the device may make it smaller so that it can be
sent by MMS.
A multimedia message can contain text, pictures, sound clips, and video clips.
Create text or multimedia message
Select Menu > Messaging > New message > Message. To add recipients, scroll to the To:
field, and enter the recipient’s number or e-mail address, or select Add to select recipients
from the available options. To add Cc or Bcc recipients, select Options > Add recipient > Cc
or Bcc. To enter message text, scroll to the Text: field, and enter the text. To add a subject for
the message, select Options > Add subject, and enter the subject. To attach content to the
message, select Options > Insert and the desired type of attachment. To send the message,
press the call key.
The message type is changed automatically depending on the content of the message.
Operations that may cause the message type to change from text message to multimedia
message include, but are not limited to, the following:
Attach a file to the message.
Request a delivery report.
Set priority for the message to high or low.
Add a Cc or Bcc recipient or subject to the message or an e-mail address in the recipient field.
When the message type changes to multimedia message, the phone may briefly display Message
changed to multimedia, and the header text of the message editing window changes to New
multimedia. Check the header text for message type.
Service providers may charge differently depending on the message type. Check with your
service provider for details.
2600_ENv1_9211380.fm Page 14 Thursday, August 7, 2008 2:47 PM
15
Instant messaging
Instant messaging (IM) is a way to send short, simple text messages to friends and family,
regardless of the mobile system or platform they use (like the internet), as long as they all
use the same instant messaging (IM) service. Check with your service provider for availability.
Before you can use IM, you must first register with the instant messaging service you want
to use and obtain a unique ID and password. See “Register with an IM service,” p. 15 for
more information.
Note: Depending on your IM service provider, you may not have access to all of the
features described in this guide and your menus may be different.
To check the availability and costs and to subscribe to the IM service, contact your wireless
service provider and the IM service provider from whom you receive your unique ID, password,
and settings.
Depending on the network, the active IM conversation may consume the phone battery
faster, and you may need to connect the phone to a charger.
Register with an IM service
Before you can use IM, you must register with an IM service to obtain a user name and password.
You can obtain a user name and password by registering over the internet (using your computer)
with the IM service provider you have selected. During the registration process, you will have the
opportunity to create the user name and password of your choice. For more information about
signing up for IM services, contact your wireless service provider or an IM service provider.
Log in
1. Select Menu > Messaging > Instant Messaging.
A list of available IM services is displayed.
2. Select the IM service you want to use and enter your unique ID and password.
If you have already logged in to an IM service before, the unique ID you used previously is
displayed automatically.
3. Select Sign In.
Depending your IM service provider, these may not be the exact menu items displayed.
You can choose to save your password so you do not have to enter it each time you sign in,
or you can choose to log in automatically and skip the log in window when you select the IM
application. Scroll to Save Password or Automatic Sign-In and select Mark.
Icons and menu items
Each IM service provider has its own unique interface, so the IM menu items, display text,
and icons on your phone may appear differently for each IM service. If you have questions
about the differences in the various IM service providers’ text and icons, contact your wireless
service provider for more information.
2600_ENv1_9211380.fm Page 15 Thursday, August 7, 2008 2:47 PM
16
IM provider selection menu
When you select IM from your phone menu, a list of available IM services is displayed.
Select the desired IM service to access the offline menu options: Sign in and Saved
conversations. Depending on the IM service provider you are using, these may not be
the exact menu items displayed.
Online menu
After you log into IM, the following IM online options appear: Conversations, Online, and
Offline. Depending on the IM service provider you are using, these may not be the exact
menu items displayed.
Begin an IM session
You can send instant messages to anyone if you have the person’s unique ID and you use the
same IM service. As the conversation progresses, the most recent message appears at the
bottom of the window, causing the previous messages to move up one level (some IM
services may do this in the opposite direction).
If you want to chat with a person, you must first add that person to Online contacts. See
“Contacts,” p. 17.
To begin an IM session, do the following:
1. From the IM online menu, select a contact who is online.
Some IM service providers also allow sending instant messages to contacts who are
not online.
2. To send a message to a person who is not in your contacts list, select Options, the option
to send a message, and enter the unique ID of the person.
A conversation window is displayed, with the contact’s name displayed at the top.
3. Enter a message. When you finish the message, select OK.
Receive and reply to messages
If you have an active IM conversation open and receive an instant message from the contact or
group member with whom you are chatting, the new message is displayed on the conversation
window in the sequence in which they are received. Select Write to reply.
If you receive an instant message when you have the IM application open, but do not have
an active chat open, a message appears showing you have a new instant message with the
name of the sender. Select Open to open the conversation window with that contact’s new
message displayed. To reply, select Write, enter a message, and select OK.
If you receive an instant message when you are logged in to the IM service, but do not have the
IM application open on your phone, a message is displayed telling you that a new IM message
has been received. Select Start to open the IM application, and view the new message.
2600_ENv1_9211380.fm Page 16 Thursday, August 7, 2008 2:47 PM
17
Return to a chat session
From the IM online menu, select Conversations. This list displays all IM conversations and
group chats in which you are currently participating. To view a conversation or continue
chatting, select a group name or contact name.
Use detail from a chat
If a contact sends you a phone number or URL in a chat session, you can call that phone
number or connect to the URL.
From the chat session, select Options > Use detail. A list of phone numbers or URLs from the
chat session is displayed. Select the desired item.
If you select a URL, the IM application closes and the web browser starts. To log back into
the IM application, select Menu > Messaging > IM. The IM application opens, and you can
see your conversations and contacts.
Chat session options
You can save, view, rename, or delete a chat session.
To save a chat session, while you have the conversation open, select Options > Save, edit the
name if desired, and select OK.
To view a saved chat session, from the IM online menu, select Options > Saved conversations.
Scroll to the desired conversation name, and select Open.
To rename a saved chat session, from the IM online menu, select Options > Saved conversations.
Scroll to the desired conversation name, and select Options > Rename. Rename the conversation,
and select OK.
To delete a saved chat session, from the IM online menu, select Options > Saved conversations.
Scroll to the desired conversation name, and select Options > Delete > OK.
Set your availability
You can determine if other users can tell whether you are available. From the IM online
menu, select Options > My Status. Scroll to the desired option, and press Select.
Contacts
You can add the names of contacts with whom you interact frequently by IM to the
contacts list.
Add a new contact
To add a contact from the IM online menu, select Options > Add contact > Select. Enter the
contact’s information, and select OK.
Remove a contact
From the IM online menu, select Online contacts or Offline contacts. Scroll to the contact
you want to remove, and select Options > Delete contact > OK.
2600_ENv1_9211380.fm Page 17 Thursday, August 7, 2008 2:47 PM
18
Exit IM
From the IM online menu, you can exit the IM application, but still be connected to the IM
service. Select Back until the IM online menu appears; then select Exit. If you open IM again,
you do not need to log in again.
You can receive instant messages and chat invitations from your contacts when using your
phone for other purposes, such as playing a game. If you are connected to your IM service, but
you have not used your IM application for some time, you may be automatically disconnected
from the IM service. The next time you open the IM application, you must log in again.
Log out of IM
From the IM online screen, select Options > Sign off > Select.
To disconnect from the IM service, you must log out from the online window. You are taken
to the login screen of the IM service provider, where you can return to the IM service provider
selection list, exit the IM application, or select an IM service and log in again.
Audio message
You can use MMS to create and send a voice message. MMS must be activated before you
can use audio messages.
Select Menu > Messaging > New message > Audio. The recorder opens. When you finish
recording an audio message, enter the recipient’s phone number in the To: field to send the
message. To retrieve a phone number from Address Book, select Add > Contacts. To view the
available options, select Options.
When your phone receives audio messages, to open the message, select Play. If more than
one message is received, select Show > Play. To listen to the message later, select Exit.
Select Options to see the available options. The audio message is played through the earpiece
by default. Select Options > Loudspeaker to choose loudspeaker.
Voice mail
The voice mailbox is a network service and you may need to subscribe to it. Contact your
service provider for a voice mailbox number and detailed information.
Select Menu > Messaging > Voice mail.
■ Recent calls
The phone registers the missed, received, and dialed calls if the network supports it and the
phone is switched on and within the network service area.
You can view the date and the time of the call, edit or delete the phone number from the list,
save the number in Address Book, or send a message to the number.
To view the information on your calls, select Menu > Recent Calls > Missed calls, Calls
received, or Calls made. To view your recently missed and received calls, and the dialed
2600_ENv1_9211380.fm Page 18 Thursday, August 7, 2008 2:47 PM
19
numbers, chronologically, select All calls. To view the contacts to whom you most recently
sent messages, select Message recipients.
Select Menu > Recent Calls > Call time, Packet data counter, or Packet data conn. timer for
approximate information on your recent communications.
Note: The actual invoice for calls and services from your service provider may vary,
depending on network features, rounding off for billing, taxes, and so forth.
To delete the recent calls lists, select Clear recent calls. You cannot undo this operation.
■ MEdia Net
You can access various mobile internet services with your phone browser. Check the availability
of these services, pricing, and tariffs with your service provider.
Important: Use only services that you trust and that offer adequate security and
protection against harmful software.
Service connection
Make sure that service settings are saved and activated.
To make a connection to the service, open the start page (for example, the home page of the
service provider), select Menu > MEdia Net > MEdia Net, or in the standby mode, press and
hold 0. To access a bookmark, select Menu > MEdia Net > Bookmarks. If the bookmark does
not work with the current active service settings, activate another set of service settings and
try again. To access the last URL, select Menu > MEdia Net > Last MEdia Net address. To enter
the address of the service, select Menu > MEdia Net > Go to.
To quit browsing and to end the connection, press and hold the end key.
After you connect to the service, you can browse its pages. The function of the phone keys
may vary in different services. Follow the text guides on the phone display.
If GPRS is selected as the data bearer, is displayed on the top left of the display during
browsing. If you receive a call or a text message, or make a call during a GPRS connection,
is displayed on the top left of the display to indicate that the GPRS connection is suspended
(on hold). After a call, the phone tries to reconnect the GPRS connection.
Browser appearance settings
In the standby mode, select Menu > MEdia Net > Settings > Appearance settings. Select
Text wrapping > On to allow the text to continue on the next line. If you select Off, the text
will be abbreviated. Select Show images > No, and any pictures appearing on the page are
not shown. To set the phone to alert when a secure connection changes to an insecure one
during browsing, select Alerts > Alert for unsecure connection > Yes. To set the phone to
alert when a secure page contains an insecure item, select Alert for unsecure items > Yes.
These alerts do not guarantee a secure connection. To select the character set for showing
browser pages that do not include that information or to select whether to always use UTF-8
encoding when sending a web address to a compatible phone, select Character encoding.
2600_ENv1_9211380.fm Page 19 Thursday, August 7, 2008 2:47 PM
20
Service inbox
The phone can receive service messages (network service) (pushed messages) sent by your
service provider. To read this service message, select Show. If you select Exit, the message
is moved to the Service inbox. To set the phone to receive service messages, select Menu >
MEdia Net > Settings > Service inbox settings > Service messages > On.
Browser security
Security features may be required for some services, such as banking services or online shopping.
For such connections you need security certificates and possibly a security module, which may
be available on your SmartChip card. For more information, contact your service provider.
■ MEdia Mall
This menu provides access to the Mall website. The Mall provides links to a variety of content
that may be purchased and downloaded to your phone.
If you have questions about billing or about accessing this website, please contact your
service provider.
■ Games and Applications
Your phone software may include some games and Java applications specially designed for
this Nokia phone.
To view the amount of memory available for game and application installations, select
Menu > Games & Apps > Options > Check memory. To launch a game or an application,
select Menu > Games & Apps > Games, or Application. Scroll to a game or an application,
and select Open. To download a game or an application, select Menu > Games & Apps >
Options > Downloads > Game downloads or App. downloads. Your phone supports J2ME
™
Java applications. Make sure that the application is compatible with your phone before
downloading it.
Important: Only install and use applications and other software from trusted
sources, such as applications that are Symbian Signed or have passed the Java
Verified
TM
testing.
Note that when downloading an application, it may be saved in the Games menu instead of
the Application menu.
■ My Stuff
The My Stuff menu contains the Tones & Gr., Multimedia, and Tools menus.
Tones & Graphics
In this menu, you can manage themes, graphics, recordings, and tones. These files are
arranged in folders.
2600_ENv1_9211380.fm Page 20 Thursday, August 7, 2008 2:47 PM
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
