SilverStone RVS02 Specification

Page is loading ...

RVS02

USB 3.0 EXTERNAL 2.5’’ HDD/SSD ENCLOSURE

1

Installation and system optimization guide:

Thanks you for purchasing, please read manual in detail first before operation.

Specifications subject to change without notice.

http://www.silverstonetek.com

P. 3

P. 7

PRODUCT OVERVIEW

ENGLISH

P. 2

P. 11

P.15

P.19

P.23

P.31

P.35

P.27

P.39

简体中文

Features

USB 3.0 EXTERNAL 2.5’’ HDD/SSD ENCLOSURE

Elegant design with in mold decoration plastic

Support 2.5” SATA I/SATA II/SATA III hard drive and SSD

Plug and play with hot-swappable connection

Maximum 5Gbit/s data transfer speed via USB 3.0 interface

Maximum compatibility with USB 2.0 (480Mbits)

Introduction

SilverStone created an incredible mobile storage product in the RAVEN RVS02 with a new high-grade feeling and screwless

design. It enables users to swap out hard drive effortlessly. Not only does it lets you replace hard drive faster than just about

any external enclosure, the RVS02 will has an optional elegant design accessories to let user build extra function by unique

dock, such as desk LED light or small fan. Equipped with USB 3.0 5Gbit/s super speed interface, the RVS02 is an excellent

choice for taking important data on the go with maximum flexibility and performance.

Model No.

Enclosure Material

Power Requirement

Drive Size Support

Drive Interface Support

Enclosure Interface

Operating System Support

Net Weight

Dimension

Minimum System Requirements

Specifications

SST-RVS02

In mold decoration Plastic

5Vdc from USB port

2.5” HDD or SSD

SATA I/SATA II/SATA III Up to 6Gbit/s

USB 3.0 (Max. 5Gbit/s) interface

Compatible with USB 2.0 and 1.1

Windows 2000, XP, Vista, Mac OS and Linux

62 g

127.9mm (W) x 75.1mm (L) x 18.5mm (H)

Windows XP, Vista and 7

Mac OS 9.x (Apple USB support 1.3.5 and greater) and Mac OS 10.x

Linux

Computer with USB 3.0 or USB 2.0/1.1 interface

RVS02

USB 3.0 EXTERNAL 2.5’’ HDD/SSD ENCLOSURE

RVS02

2

RVS02

USB 3.0 EXTERNAL 2.5’’ HDD/SSD ENCLOSURE

3

Functions

Screw less design for quick install in 10 second

USB 3.0 Host Interface (micro type connector) up to 5Gbps

Compatible down to USB 2.0/1.1

Supports 2.5” SATA HDD and SSD (9.5 mm high)

Simple connection without power adapter

LED display for power and HDD access

System Requirements

Hardware requirement: Computer with USB 3.0 port.

Software requirement: Windows XP / Vista / 7, Mac OS 10.x, Linux.

Packing Contents

Exterior Layout

Please confirm first whether to include the following accessories in the packaging of product or not, when omit, please kindly

contact with the local distributor as quickly as possible.

Interface: USB 3.0

User’s Manual: 1 PCS

USB 3.0 Y Cable: 1 PCS

Flannel Bag: Option

USB 3.0 A port

DC-in

Install HDD

1.

Push the button on the bottom of case

to release button cover and then slide out.

2. Take off bottom cover.

3. Install SATA HDD.

Please install your HDD in the following steps. (Our products are suitable for SATA HDDs with 9.5mm height only.)

RVS02

USB 3.0 EXTERNAL 2.5’’ HDD/SSD ENCLOSURE

4

EN

RVS02

USB 3.0 EXTERNAL 2.5’’ HDD/SSD ENCLOSURE

5

4.

Slide HDD as shown to make sure

connection is completed.

5. Target the hook of the bottom cover

to corresponding catch on the body.

6. Slide bottom to make sure connection

is completed. It makes a "CLICK" sound.

Safely Remove HDD External Case

Whatever kinds of OS you are using, please follow the steps below to remove this external enclosure safely.

a. Double click rapidly on green arrow icon at right bottom corner of screen.

b. Windows or Mac will pop a window to ask if you would like to disconnect this device.

c. You can easily stop this portable enclosure by following on screen steps in few seconds.

If you use an all new HDD

Use “Disk Manage” to configure your HDD.

Troubleshooting

A. Please make sure your HDD has been installed correctly.

B. Please make sure you have installed correct driver for this enclosure.

C. Please make sure your HDD has been formatted. If no, please format you hard drive first.

* if you don't know how to install or debug, please don't disassemble it. Please contact the seller for help. *

CAUTION!!

A. If you are not sure what OS you are using, please contact your PC dealer.

B. Please don't put this external enclosure in a humid or high temperature environment.

C. If the PC or this storage is damaged by fault operation of user, we would not take the responsibility of compensation or repair.

RVS02

USB 3.0 EXTERNAL 2.5’’ HDD/SSD ENCLOSURE

6

EN

Page is loading ...

SilverStone RVS02 Specification

SilverStone RVS02 Specification

in other languages

Related papers

Other documents