Craftsman 580.752050 Owner's manual

Brand: Craftsman

Model: 580.752050

Category: High-pressure cleaners

Type: Owner's manual

This manual is also suitable for

Operator'sManual

2550 PSi MAX

2.3 GPM MAX

CLEAN SYSTEM

Model No. 580.752050

PRESSUREWASHER

CUSTOMERHELPLINE

HOURS:Nan. oFri.8 a.m. to 5 p.m. (CT)

WAReleG

Before usingthis product, readthis

manualand follow all SafetyRules

and Operating Instructions.

I_ I7ADVERTENCIA

Antes de utilizar el producto, lea este

manualy siga todas las Reglasde

Seguridade Instrucciones de Uso.

Sears, Roebuckand Co., RoffmanEstates,IL 60179 U.S.A.

Visit ourCraftsman website:www.craftsman.com

Part No. 203792GS Draft A (09/17/2007)

• Safety

• Assembly

• Operation

• Maintenance

• Parts

,, Espafiol,p. 34

WARRANTY.......................................... 2

SAFETYRULES...................................... 2-5

FEATURESANDCONTROLS.............................. 6

ASSEMBLY........................................ 7-10

OPERATION....................................... 11-14

SPECIFICATIONS..................................... 15

MAINTENANCE.................................... 16-20

STORAGE........................................... 21

TROUBLESHOOTING.................................. 22

NOTES......................................... 23 & 31

REPLACEMENTPARTS.............................. 24-30

EMISSIONCONTROLWARRANTY..................... 32-33

ESPANOL......................................... 34-59

HOWTO ORDERPARTS........................ BACKPAGE

ONE-YEARFULLWARRAHTYONCRAFTSMAHPRESSUREWASHER

If this pressurewasher fails dueto a defectin material or workmanship within one year from the dateof purchase,return it to

any Searsstore, other Craftsman outlet, or SearsParts & RepairCenterin the UnitedStates or Canadafor free repair (or

replacementif repair proves impossible).

All warranty coverageapplies for only 90 days from dateof purchaseif this pressurewasher is ever usedfor commercial or

rentalpurposes.

This warranty gives you specific legal rights, and you mayalso haveother rights which vary from stateto state.

Sears, Roebuck and Co., Hoffman Estates, IL 60178

Sears Canada Inc., Toronto, Ontario, Canada M5B 288

,_ Thisisthe safetyalert symbol.It isusedto alert youtopotentialpersonalinjuryhazards.Obeyall safetymessages

thatfollow thissymboltoavoid possibleinjuryor death.

_Read this manualcarefully and becomefamiliar

with yourpressurewasher. Knowits applications,

its limitations, and any hazardsinvolved.

Thesafety alert symbol (_.) is usedwith a signal word

(DANGER,CAUTION,WARNING),a pictorial and/or a safety

messageto alert you to hazards.BANGERindicatesa hazard

which, if not avoided, willresult in deathor serious injury.

WARNINGindicates a hazardwhich, if not avoided, could

result in deathor serious injury. CAUTIONindicatesa hazard

which, if not avoided, might result in minor or moderate

injury. NOTICEindicatesasituation that could result in

equipment damage. Follow safety messagesto avoid or

reducethe risk of injury or death.

Hazard Symbolsand Meaninos

ToxicFumes Kickback

2 5-

SlipperySurface Fall

Fire

Explosion

ElectricalShock

FluidInjection

Operator'sManual

MovingParts FlyingObjects

HotSurface

WARHJNG

Theengineexhaustfromthisproductcontains

chemicalsknowntotheState of California tocause

cancer,birthdefects,or otherreproductiveharm.

WARHJHG

Runningengine gives off carbon monoxide, an

odorless, colorless, poison gas.

Breathingcarbon monoxide can cause headache,

_ atigue, dizziness,vomiting, confusion, seizures,

nausea,fainting or death.

Some chemicals or detergents may be harmful if

inhaled or ingested, causing severe nausea,

fainting, or poisoning.

* OperatepressurewasherONLYoutdoors.

Keepexhaustgasfromenteringaconfinedareathrough

windows,doors,ventilationintakes,or otheropenings.

DONOTstartor runengineindoorsor in anenclosedarea,

evenif windowsanddoorsareopen.

Usea respiratoror maskwheneverthereisa chancethat

vaporsmaybeinhaled.

Readall instructionswith masksoyouarecertainthemaskwill

providethenecessaryprotectionagainstinhalingharmful

vapors.

WARHIHG

_¢ isk of electrocution.

Contactwith power sourcecan causeelectric

shock or burn.

* NEVERspraynearpowersource.

WARHIHG

Fueland its vapors are extremely flammable and

explosive.

Fireor explosion cancause severe burns or

death.

WHENADDINGORDRAININGFUEL

* TurnpressurewasherOFFandletit coolatleast2 minutes

beforeremovingfuelcap.Loosencapslowlyto relievepressure

in tank.

Fillor drainfueltankoutdoors.

DONOToverfilltank.Allowspaceforfuelexpansion.

Iffuelspills,waituntilit evaporatesbeforestartingengine.

Keepfuelawayfromsparks,openflames,pilotlights,heat,and

otherignitionsources.

DONOTlighta cigaretteorsmoke.

WHENSTARTIN6EQUIPMENT

* Ensuresparkplug,muffler,fuelcap,andair cleanerarein

place.

. DONOTcrankenginewith sparkplugremoved.

WHENOPERATINGEQUIPMENT

* DONOTtip engineorequipmentat anglewhichcausesfuelto

spill.

. DONOTsprayflammableliquids.

WHENTRANSPORTINGORREPAIRINGEQUIPMENT

* Transport/repairwithfueltank EMPTYor withfuelshutoffvalve

OFF.

. Disconnectsparkplugwire.

WHENSTORINGFUELOREQUIPMENTWITH FUELIN TANK

* Storeawayfromfurnaces,stoves,waterheaters,clothes

dryers,or otherappliancesthathavepilotlightor otherignition

sourcebecausetheycanignitefuelvapors.

WARHJHG

Startercord kickback(rapid retraction) can result

in bodily injury. Kickbackwill pull handand arm

_,_.< toward engine faster than you can let go.

Brokenbones, fractures, bruises, or sprains

could result.

• NEVERpull starter cord without first relieving spray gun

pressure.

. When starting engine, pull cord slowly until resistanceis felt

andthen pull rapidly to avoid kickback.

• After eachstarting attempt, where enginefails to run, always

point spray gun in safe direction and squeezespray gun trigger

to releasehigh pressure. Engagespray gun trigger lock.

• Firmly grasp spray gun with both handswhen using high

pressure spray to avoid injury when spray gun kicks back.

WARHIHG

Useof pressure washer cancreate puddles and

slippery surfaces.

Kickbackfrom spraygun cancause you to fall.

. Operatepressure washer from astable surface.

• The cleaningarea should haveadequateslopes and drainageto

reducethe possibility of afall due to slippery surfaces.

. Be extremelycareful if you must usethe pressure washer from

a ladder,scaffolding, or any other similar location.

• Firmly grasp spray gun with both hands when using high

pressure spray to avoid injury when spray gun kicks back.

WARHIHG

_ Contact with muffler result in serious

area can

burns.

_ Exhaustheat/gases can ignite combustibles,structures or damagefuel tank causing a fire.

• DO NOTtouch hot parts and AVOID hot exhaust gases.

. Allow equipment to cool before touching.

• Keepat least 5feet (152 cm) of clearanceon all sides of

pressure washer including overhead.

• Codeof FederalRegulation (CFR)Title 36 Parks, Forests,and

Public Property require equipment powered by an internal

combustion engine to havea spark arrester, maintained in

effective working order, complying to USDAForestservice

standard 5100-1C or later revision. Inthe State of California a

spark arrester is requiredunder section 4442 of the California

Public resources code. Other statesmay havesimilar laws.

WARHIHG

The high pressure stream of water that this

equipment produces can cut through skin and its

_ nderlying tissues, leading to serious injury and

)ossible amputation.

Spray gun traps high water pressure, even when

engine is stopped and water is disconnected,

which can cause injury.

• DONOTallow CHILDRENto operate pressure washer.

. NEVERrepair high pressure hose. Replaceit.

• NEVERrepair leaking connections with sealantof any kind.

Replaceo-ring or seal.

• NEVERconnect high pressure hoseto nozzle extension.

. Keephigh pressure hoseconnectedto pump and spray gun

while system is pressurized.

• ALWAYS point spray gun in safe direction and squeezespray

gun trigger, to releasehigh pressure, everytime you stop

engine. Engagetrigger lock when not in use.

• NEVERaim spray gun at people, animals, or plants.

. DONOTsecure spray gun in open position.

• DO NOTleavespray gun unattendedwhile machineis running.

. NEVERusea spray gun which does not have atrigger lock or

trigger guard in place andin working order.

. Always be certain spray gun, nozzlesand accessories are

correctly attached.

WARHIHG

_ Unintentionalsparking can result in fire or

_¢ electric shock.

WHENADJUSTINGORMAKINGREPAIRSTOYOUR

PRESSUREWASHER

. Disconnectthe sparkplug wire from the spark plug and place

the wire where it cannot contact spark plug.

WHENTESTINGFORENGINESPARK

. Use approved sparkplug tester.

• DONOTcheck for sparkwith spark plug removed.

WARHJHG

Starter and other rotating parts canentangle

hands, hair, clothing, or accessories.

* NEVERoperate pressure washer without protective housing or

covers.

* DO NOTwear loose clothing, jewelry or anything that may be

caught in the starter or other rotating parts.

* Tie up long hair and remove jewelry.

WARNING

Risk of eye injury.

" _ JSpraycan splash back or propel objects.

Alwayswear safety goggles when using this equipment or in

vicinity of where equipment is in use.

Beforestarting the pressure washer, be sureyou are wearing

adequatesafety goggles.

NEVERsubstitute safety glasses for safety goggles.

NOTICE

High pressure spray may damage fragile items including

lass.

DO NOTpoint spray gun at glasswhen using red (0°) spraytip.

NEVERaim spray gun at plants.

NOTICE

Improper treatment of pressure washer can damage it and

shorten its life.

Ifyou have questions about intended use, ask dealer or contact

Sears.

NEVERoperate units with broken or missing parts, or without

protective housing or covers.

DONOT by-pass any safetydevice on this machine.

DONOTtamper with governed speed.

DONOToperate pressurewasher above rated pressure.

DONOT modify pressure washer in any way.

Before starting pressure washer in cold weather, check all parts

of the equipment to besure ice has not formed there.

NEVERmove machine by pulling on hoses. Use handle

provided on unit.

Checkfuel system for leaksor signs of deterioration, such as

chafed or spongy hose,loose or missing clamps, or damaged

tank or cap. Correct all defects beforeoperating pressure

washer.

This equipment is designed to be usedwith Searsauthorized

parts ONLY.If equipment is used with parts that DO NOT

comply with minimum specifications, userassumes all risks

and liabilities.

KNOWYOURPRESSUREWASHER

_Read the Operator'sManual and safety rulesbefore operatingyourpressurewasher.

Comparethe illustrations with your pressurewasher to familiarizeyourself with the locations of various controls and

adjustments. Savethis manualfor future reference.

A- Spray Gun-- Controlsthe application of water onto

cleaningsurfacewith trigger device,includes trigger lock.

B - Cleaning Tank - Usedto provide pressure washer safe

detergents into the low pressure stream.

C- Spray Tips -- Detergent,0°, 15° and 40°: for various

high pressure cleaning applications.

D - Recoil Starter -- Used for starting the engine manually.

E - FuelTank -- Filltankwith regular unleadedfuel. Always

leaveroom for fuel expansion.

F - Throttle Lever -- Setsengine in starting mode for recoil

starter and stops a running engine.

G - AirFilter -- Protects engine by filtering dust and debris

out of intake air.

H - Pump -- Developshigh pressure.

J - AutomaticCool DownSystem -- Cycleswater through

pump when water reaches125°-155°F.Warm water will

dischargefrom pump onto ground. This system prevents

internal pump damage.

K- High Pressure Outlet -- Connectionfor high pressure

hose.

L - Water Inlet -- Connectionfor garden hose.

IVl- Oil Fill/Dipstick -- Check,add and drain engine oil here.

N - High Pressure Hose-- Connectone end to water pump

and the other end to spray gun.

Items Not Shown:

Data Tag (near rear of base plate) -- Provides model and

serial number of pressure washer. Pleasehavethese readily

availableif calling for assistance.

NozzleExtensionwith QuickConnect-- Allows you to

switch betweenfour different spray tips.

Safety Goggles-- Always usethe enclosedsafety goggles

when running your pressure washer.

Warning/Operating instructionsTag-- identifies hazards

and proper procedureto start/stop pressure washer.

Yourcleaningsystemrequiressomeassemblyandisready

foruseonlyafterithasbeenproperlyservicedwiththe

recommendedoilandfuel.

If you haveany problemswith the assemblyof your

pressurewasher, please call the pressurewasher heipline

at 1-800-222-3135.

UNPACKTHEPRESSUREWASHER

8. Attach nozzleextension to spray gun.

9. Select/attachquick connect spray tip to nozzleextension.

Attach Handle and CJeaningTank

1. Placehandle (A) onto handlesupports (B) connectedto

main unit. Make sure holes (C) in handlealign with holes

1. Removeeverything from carton exceptpressure washer.

2. Opencarton completely bycutting eachcorner from top

to bottom.

3. Removepressure washer from carton.

CARTONCONTENTS

Checkall contents, if any parts are missing or damaged,call

the pressure washer helpline at 1-800-222-3136.

* Main Unit

* Handle

* CleaningTankAssembly

* High PressureHose

* Spray Gun

* NozzleExtensionwith Quick ConnectFitting

* Oil Bottle

* DetergentSiphoning Hose/Filter

* Parts Bag (which includes the following):

* Operator's Manual

* Owner's Registration Card

* SafetyGoggles

* GunHolderWireform

* Bagcontaining 4 multi-colored Spray Tips

* HandleFasteningHardwareKit (whichincludes):

* CarriageBolts (2)

* "L" Bolt

* Plastic Knobs (4)

, TreeClips (4)

Becomefamiliar with eachpiecebefore assemblingthe

pressure washer, identify all contents with the illustration on

page 6. If any parts are missing or damaged,callthe

pressure washer helpline at 1-800-222-3136.

ASSEMBLINGCLEANINGSYSTEM

Your Craftsmancleaningsystem will needassembly before

operation:

1. Fill out and send in registration card.

2. Attach handleand cleaningtank.

3. Connectdetergent siphon hoseto pump.

4. Add oil to engine crankcase.

5. Add fuel to fuel tank.

6. Connectpressure hoseto spray gun and pump.

7. Connectwater supply to pump.

NOTE:It may be necessaryto move the handle supports

from sideto side in order to align the handle so it will slide

overthe handlesupports.

2. Insert carriagebolts (A)through holesfrom back of unit

and attacha plastic knob (B) from front of unit. Tighten

by hand.

Placecleaningtank (B) over holes (C)on handle

(viewing from front of unit). Pushthe tree clips (A) into

the holes until they sit flat againstthe cleaningtank.

"-.

IS'

Insert "L" bolt (A) through hole just abovecleaning tank

on right side of handle (viewing from front of unit). Hold

bolt in placeand attachplastic knob (B) from inside of

unit. Tighten by hand.

Insert spray gun holder wireform (h) through holejust

abovecleaningtank on left side of handle (viewing from

front of unit). Hold wireform in placeand attach a plastic

knob (B) from inside of unit. Tighten by hand.

Attach Detergent Siphon Hose to Pump

Thepressure washer is equipped with two detergent

siphoning hoses.One is attachedto the cleaningtank and

one is loosefor siphoning pressure washer safe detergents

from abottle or container.

Attach one of the detergent siphon hoses (A) to the barbed

hose fitting (B) on the pump.

IMPORTANT:Onlyone detergent siphoning hosecan be used

at a time. When cleaningtank is not used, makesure

detergent shut-off valve on cleaningtank is in the "Off"

position.

Add Enoine OiJ

1. Placepressure washer on a flat, levelsurface.

2. Cleanarea around oil fill andremove yellow oil fill

cap/dipstick.

3. Using oil funnel (optional), slowly pour contents of

provided oil bottle into oil fill opening.

NOTICE

Improper treatment of pressurewasher can damageit and

shorten its life.

DONOTattempttocrankor starttheenginebeforeit hasbeen

properlyservicedwiththerecommendedoil.Thismayresultin

anenginefailure.

4. Replaceoil fill cap/dipstick and fully tighten.

Add Fuel

Fuelmustmeet theserequirements:

* Clean,fresh, unleadedgasoline.

* A minimum of 87 octane/87AKI (91 RON).High altitude

use, seeHigh Altitude.

* Gasolinewith up to 10% ethanol (gasohol) or up to 15%

MTBE(methyl tertiary butyl ether) is acceptable.

NOTICE

Avoid pressure washer damage.

Failureto follow Operator's Manualfor fuel

recommendations voids warranty.

DONOTuseunapprovedgasolinesuchasE85.

DONOTmixoil in gasoline.

DONOTmodifyengineto runon alternatefuels.

To protect the fuel system from gum formation, mix in a fuel

stabilizer when adding fuel. See Storage.All fuel is notthe

same. If you experiencestarting or performance problems

after using fuel, switch to a different fuel provider or change

brands. This engine is certified to operateon gasoline. The

emission control system for this engine is EM (Engine

Modifications).

WARHIHG

FueIand its vapors are extremely flammable and

explosive.

Fireor explosion can causesevere burns or

death.

WHENADDINGFUEL

. TurnpressurewasherOFFandletit coolatleast2minutes

beforeremovingfuelcap.Loosencapslowlyto relievepressure

in tank.

. Fillfueltankoutdoors.

• DONOToverfilltank.Allowspaceforfuelexpansion.

. Iffuelspills,waituntilit evaporatesbeforestartingengine.

• Keepfuelawayfromsparks,openflames,pilotlights,heat,and

otherignitionsources.

• DONOTlighta cigaretteorsmoke.

1. Cleanareaaround fuel fill cap, removecap.

2. Slowly add regular unleadedfuel (A) to fuel tank (B). Be

careful not to overfill. Allow about 1.5" (4cm) (C) oftank

space for fuel expansion.

3. Installfuelcap and wait for anyspilled fuelto evaporate.

CAUTION!Alcohol-blended fuels (calledgasohoI,ethanol or

methanol) can attract moisture, which leadsto separation and

formation of acids during storage.Acidic gascan damagethe

fuel system of an enginewhile in storage.

Toavoid engine problems, the fuel system should betreated

with a fuel preserver or emptied before storage of 30 days or

longer. If adding a fuel preserver,fill the fuel tank with fresh

fuel. if only partially filled, air in the tank will promote fuel

deterioration during storage, if fuel preserver is not used,

drain the fuel tank, start the engineand let it run until the fuel

lines and carburetor are empty. Usefresh fuel next season.

See Storagefor additional information.

NEVERuseengine or carburetor cleanerproducts in the fuel

tank as permanent damagemay occur.

HighAltitude

At altitudes over 5,000 feet (1524 meters), a minimum

85 octane/ 85 AKI (89 RON)gasoline is acceptable.To

remain emissions compliant, high altitude adjustment is

required. Operationwithout this adjustment will cause

decreasedperformance, increasedfuel consumption, and

increasedemissions. Seea qualified Searsdealer for high

altitude adjustment information. Operationof the engineat

altitudes below 2,500 feet (762 meters) with the high altitude

kit is not recommended.

Connect Hose and Water Supply to Pump

[ NOTICE

JDONOT the without the connected

run

pump

water

supply

and turned on.

L amageto equipmentresultingfrom failureto followthis

instructionwillvoidwarranty.

NOTE:Removeand discardthe shipping caps from the

pump's high pressure outlet and water inlet beforeattaching

hoses.

1. Uncoil high pressure hose and attach one end of hoseto

baseof spray gun. Tighten by hand.

WARNING

Thehigh pressurestream of water that this

_ quipment produces cancut through skin and its

underlyingtissues, leadingto serious injury and

)ossible amputation.

. NEVERconnecthighpressurehoseto nozzleextension.

• Keephighpressurehoseconnectedto pumpandspraygun

whilesystemispressurized.

• Alwaysbecertainspraygun,nozzlesandaccessoriesare

correctlyattached.

Attach other end of high pressure hoseto high pressure

outlet on pump. Tighten by hand.

3. 6. TurnONwater,pointguninasafedirectionandsqueeze

triggertopurgepumpsystemofairandimpurities.

Beforeconnectinggardenhosetowaterinlet,inspect

inletscreen(A).Cleanscreenifitcontainsdebrisorhave

itreplacedifdamaged.DONOTrun pressurewasher if

inlet screenis damagedor missing.

4. Run water through garden hose for 30 secondsto flush

it of debris. Turn off water.

IMPORTANT:DONOTsiphon standing water for the water

supply. UseONLYcold water (less than IO0°F).

5. Connectgarden hose (not to exceed50 feet in length) to

water inlet. Tighten by hand.

NOTICE

Using a OneWay Valve(vacuum breakeror check valve)at

pump inlet cancause pump or inlet connector damage.

ThereMUSTbeatleasttenfeetofunrestrictedgardenhose

betweenthe pressurewasherinletandanydevice,suchasa

vacuumbreakerorcheckvalve.

Damageto equipmentresultingfrom failuretofollowthis

instructionwillvoidwarranty.

WARHJHG

Riskof eyeinjury.

m_JSpray cansplash back or propel objects.

Alwayswearsafetygoggleswhenusingthis equipmentor in

vicinityof whereequipmentisin use.

Beforestartingthepressurewasher,besureyouarewearing

adequatesafetygoggles.

NEVERsubstitutesafetyglassesfor safetygoggles.

ChecklistBefore StartingEngine

Reviewthe unit to ensureyou have performed all of the

following:

1. Besure to read Safety Rulesand Operationsections

before usingthe cleaning system.

2. Makesure handle is in placeand secure.

3. Checkthat oil has beenadded to proper levelin engine

crankcase.

4. Add proper fuelto fuel tank.

5. Checkfor proper hoseconnections (high pressure and

water supply) and that there are no kinks, cuts, or

damageto the high pressure hose.

6. Provideproper water supply (not to exceedIO0°F).

HOWTOUSEYOURCLEANJHGSYSTEM

If you haveany problems operatingyour pressurewasher,

pleasecallthe pressure washer helpline at 1-800-222-3136.

Pressure Washer Location

PressureWasherClearance

,_ WARNING

_ Exhaustheat/gases can ignitecombustibles,

structures or damagefuel tank causing a fire.

* Keepatleast5ft. (152cm)clearanceonall sidesofpressure

washerincludingoverhead.

Placepressure washer outdoors in an areathat will not

accumulate deadlyexhaustgas. DONOTplacepressure

washer where exhaustgas (A) could accumulateand enter

inside or be drawn into a potentially occupied building.

Ensureexhaustgas is kept awayfrom any windows, doors,

ventilation intakes, or other openingsthat can allow exhaust

gasto collect in a confined area. Prevailingwinds and air

currents should be taken into considerationwhen positioning

_ressurewasher.

,_ WARHJHG

Runningengine gives off carbon monoxide, an

_ dorless, colorless, poison gas.

Breathingcarbon monoxide can causeheadache,

fatigue, dizziness,vomiting, confusion, seizures,

nausea,fainting or death.

. OperatepressurewasherONLYoutdoors.

* Keepexhaustgasfromenteringaconfinedareathrough

windows,doors,ventilationintakes,or otheropenings.

. DONOTstartor runengineindoorsor in anenclosedarea,

evenif windowsanddoorsareopen.

To Start Your Cleanin8 System

To start your engine-poweredcleaning system for the first

time, follow these instructions step-by-step. This information

also applies wheneveryou start the engine after you havelet

the pressure washer sit idle for at least a day.

1. Placepressure washer outside near an water source

capableof supplying waterat a flow rategreater than

3.2 gallons per minute and no less than 20 PSIat

pressurewasher end of garden hose.

2. Checkthat high pressure hose istightly connectedto

spray gun and pump. SeeAssembyfor illustrations.

3. Makesure unit is in a levelposition.

4. Connectgarden hoseto water inlet on pressure washer

pump.

5. Turn ONwater, point gun in a safe direction and squeeze

trigger to purge pump system of air and impurities.

{ NOTICE

% NOTrun the pump without the water supply connected

and turned on.

L amageto equipmentresultingfrom failureto followthis

instructionwillvoidwarranty.

6. Placecolored quick connect spray tips in slots on holder

that's attachedto nozzleextension.

7. Attach nozzleextension to spray gun. Tighten by hand.

B. Choose spray tipyou wantto use and insert it into

nozzleextension. SeeHow to UseSpray Tips.

9. Engagetrigger lock (A) on spray gun trigger.

10. Move throttle lever to "Fast" position (A), shown as a

rabbit.

IMPORTANT:Beforestarting the pressure washer, be sure

¢ouare wearing adequatesafety goggles.

WARHIHG

Risk of eye injury.

_Spray can splash back or propel objects.

Alwayswear safety goggles when using this equipment or in

vicinity of where equipment is in use.

Beforestarting the pressure washer, be sureyou are wearing

adequatesafety goggles.

NEVERsubstitute safety glasses for safety goggles.

NOTE:This unit is equipped with a ReadyStartTM engine. A

ReadyStartTM engine meansthere is no priming or choking

required.

11. Whenstarting engine, position yourself as

recommendedand grasp starter grip handle and pull

slowly until you feelsome resistance.Thenpull rapidly

to start engine.

WARHIHG

Starter cord kickback (rapid retraction) can result

in bodily injury. Kickback will pull hand and arm

_ toward engine faster than you can let go.

Brokenbones, fractures, bruises, or sprains

could result.

* NEVERpull starter cord without first relieving spray gun

pressure.

* When starting engine, pull cord slowly until resistanceis felt

andthen pull rapidly to avoid kickback.

After eachstarting attempt, where enginefails to run, always

point spray gun in safe direction and squeezespray gun trigger

to releasehigh pressure. Engagespray gun trigger lock.

Firmly grasp spray gun with both handswhen using high

pressure spray to avoid injury when spray gun kicks back.

12. Return recoil starter slowly. DO NOT let rope "snap

back" against starter.

NOTE: Always keep the throttle lever in the "Fast" position

when operating the pressure washer.

WARHIHG

Thehigh pressurestream of water that this

equipment produces cancut through skin and its

_ nderlying tissues, leadingto serious injury and

_ossibleamputation.

Spray gun traps high water pressure,evenwhen

engine is stopped and water is disconnected,

which can cause injury.

* DONOTallowCHILDRENtooperatepressurewasher.

* Keephighpressurehoseconnectedto pumpandspraygun

whilesystemispressurized.

* NEVERaimspraygunatpeople,animals,or plants.

* DONOTsecuresprayguninopenposition.

* DONOTleavespraygununattendedwhilemachineis running.

* NEVERusea spraygunwhichdoesnothaveatriggerlockor

triggerguardin placeandin workingorder.

* Alwaysbecertainspraygun,nozzlesandaccessoriesare

correctlyattached.

WARHIHG

_ Contact with muffler result in serious

area can

burns.

,_ Exhaustheat/gases can ignite combustibles,structures or damagefuel tank causing a fire.

* DONOTtouchhotpartsandAVOIDhotexhaustgases.

* Allowequipmenttocoolbeforetouching.

* Keepatleast5 feet(152cm) ofclearanceonall sidesof

pressurewasherincludingoverhead.

. Codeof FederalRegulation(CFR)Title36Parks,Forests,and

PublicPropertyrequireequipmentpoweredbyaninternal

combustionengineto haveasparkarrester,maintainedin

effectiveworkingorder,complyingto USDAForestservice

standard51BB-1Corlaterrevision.IntheStateof Californiaa

sparkarresterisrequiredundersection4442oftheCalifornia

Publicresourcescode.Otherstatesmayhavesimilarlaws.

Howto StopYourCleaningSystem

1. Releasespray gun trigger and letengine idlefor two

minutes.

2. Movethrottle to SLOWposition,then STOPposition (A).

3. ALWAYSpoint spray gun in a safe direction and squeeze

spray gun trigger to releaseretainedhigh water

pressure.

IMPORTANT:Spraygun traps high water pressure,even

when engine is stopped and water is disconnected.

WARHIHG

The high pressure stream of water that this

equipment produces cancut through skin and its

_ nderlying tissues, leadingto serious injury and

)ossible amputation.

Spray gun traps high water pressure,evenwhen

engine is stopped and water is disconnected,

which can cause injury.

• Keephighpressurehoseconnectedto pumpandspraygun

whilesystemispressurized.

. ALWAYSpointspraygunin safedirectionandsqueezespray

guntrigger,to releasehighpressure,everytimeyoustop

engine.Engagetriggerlockwhennotin use.

4. Engagetrigger lock on spray gun when not in use.

How to Use Spray Tips

Thequick-connect on the nozzleextensionallows you to

switch between four different quick connect spray tips. Spray

tips can be changedwhile pressure washer is running once

spray gun trigger lock is engaged.Thespray tips vary the

spray pattern asshown below.

FolJowthese instructionsto changespraytips:

1. Engagetrigger lock on spray gun.

2. Pull back collar on quick-connect and pull current spray

tip off. Storespraytips in holder provided on the nozzle

extension.

WARHIHG

The high pressure stream of water that this

_ quipment produces can cut through skin and itsunderlyingtissues, leadingto serious injury and

possible amputation.

. NEVERexchangespraytips withoutlockingthetriggerlockon

the spraygun.

. DONOTtwist spraytipswhilespraying.

Select desiredspray tip:

Low Pressure

Black

Useto apply

chemical

High Pressure

40° White 15° Yellow

1750 PSi 2200 PSi

2.3 GPM 2.2 GPM

0° Red

255OPSi

2.0 GPM

* For delicate rinse (lower pressure and higher flow),

for gentlecleaning of cars/trucks, boats, RV's,patio

furniture, lawn equipment, etc., select white 40°

spray tip.

. Forgeneral rinsing (medium pressure and medium

flow), ideal for most all purpose cleaning such as

home siding, brick patios, wood decks, driveways

and sidewalks,garage floors, etc., selectyellow

15° spray tip.

. For maximum rinsing (higher pressure and lower

flow), for stubborn or hard to reachsurfacesuch as

second story surfaces,paint removal,oil stains, rust

removal or other stubborn substances (tar, gum,

grease,wax, etc.), select red 0° spraytip.

. Toapply detergent,appliesproject specific cleaners

to help breakdown stubborn dirt and grime on a

variety of surfaces, selectblack detergentspray tip.

Pull backon collar,insert newspraytip and releasecollar.

Tugon spraytip to makesureit is securelyin place.

UsageTips

• For most effective cleaning, keepspray tip from 8 to

24 inches (20 to 61 cm) awayfrom cleaningsurface.

• If you get spray tip too close, especially usinga high

pressure spray tip, you may damagesurface being

cleaned.

• DONOTget closer than 6 inches (15 cm) when cleaning

tires.

Cleaning and Applying Detergent

CAUTION

Chemicalscan causebodily injury, and/or property

damage.

NEVERusecausticliquidwith pressurewasher.

UseONLYpressurewashersafedetergents/soaps.Followall

manufacturersinstructions.

To applydetergent follow these steps:

1. Attach desireddetergent siphon hosefollowing

instructions Attach DetergentSiphon Hose to Pump.

IMPORTANT:Be sureengine is off and allowed to cool before

switching detergentsiphoning hoses.

WARNING

_ Contact with muffler result in serious

area can

burns.

_ Exhaustheat/gases can ignite combustibles,

structures or damagefuel tank causing a fire.

* DONOTtouchhotpartsandAVOIDhotexhaustgases.

* Allowequipmentto coolbeforetouching.

2. Reviewuse of spray tips.

3. Preparedetergent solution as required by job.

4. Make sure detergent shut-off valve on cleaningtank is in

"Off" position.

5. If using cleaningtank, pour detergent into cleaningtank.

NOT[: Thecleaningtank holds one gallon.

6. Make sure black detergentspray tip is installed.

NOT[: Detergentcannot be applied with the high pressure

nozzles(White, Yellow or Red).

7. Make sure garden hoseis connectedto water inlet.

Checkthat high pressure hose is connectedto spray gun

and pump. Turn on water.

NOTICE

You must attacha]] hoses before ou start the en ine.

Startingtheenginewithoutallthehosesconnectedandwithout

thewaterturnedONwill damagethepump.

Damageto equipmentresultingfrom failuretofollowthis

instructionwillvoidwarranty.

8. Engagetrigger lock on spray gun and start engine

following instructions How to Start Your Pressure

Washer.

9A. If using cleaningtank, rotate detergentshut-off valve on

cleaningtank to "On" position (A).

IMPOFITANT:if using detergent siphoning hose, make sure

detergentshut-off valve on cleaningtank is in the ,Off,

position.

9B. If using detergent siphoning hose, placesmall filter end

of detergent siphoning tube into detergent container.

NOTE:Makesure the filter is fully submerged in detergent

while applying detergent.

NOTICE

Contact with the hot muffler can damagedetergent

siphoning tube.

Wheninsertingthefilterintoa detergentsolutionbottle,route

thetubesoasto keepit from inadvertentlycontactingthehot

muffler.

10. Apply detergentto a dry surface, starting at lower

portion of areato be washed and work upward, using

long, even, overlappingstrokes.

11. Allow detergentto "soakin"for 3-5 minutes before

washing and rinsing. Reapplyas neededto prevent

surface from drying. DONOTallow detergent to dry on

(preventsstreaking).

Pressure Washer Rinsing

ForRinsing:

1. Engagetrigger lock on spray gun.

2. If using cleaningtank, rotate detergent shut-off valveon

cleaning tank to "Off" position.

3. Removeblackspray tip from nozzleextension.

4. Selectand install desiredhigh pressure spray tip

following instructions How to Use Spray Tips.

Keepspray gun a safe distancefrom areayou plan to

spray.

WARNING

spray gun cancauseyou

Kickbackfrom to fall.

* Operatepressurewasherfrom astablesurface.

, Beextremelycarefulifyou mustusethepressurewasherfrom

a ladder,scaffolding,or anyothersimilarlocation.

* Firmlygraspspraygunwith bothhandswhenusinghigh

pressuresprayto avoidinjurywhenspraygunkicksback.

Apply a high pressure spray to a small areaand then

check surface for damage.If no damageis found, you

can assume it is okayto continue rinsing.

Start at top of areato be rinsed, working down with

same overlapping strokes asyou usedfor cleaning.

Automatic Cool Down System (Thermal Relief)

If you run the engine on your pressure washer for

3-5 minutes without pressing the trigger on the spray gun,

circulating water in the pump can reachtemperatures above

125°F.Thesystem engagesto cool the pump by discharging

the warmwater onto the ground.

EHGINETECHNICALINFORMATIOH PRODUCTSPECIFICATIOHS

This is a single cylinder, L-head,air cooled engine. It is a low

emissions engine.

Inthe Stateof California, ModelSeries 120000 enginesare

certified by the CaliforniaAir ResourcesBoardto meet

emissions standardsfor 125 hours. Suchcertification does

not grant the purchaser,owner or operator of this engine any

additional warranties with respectto the performance or

operational life of this engine.Theengineis warranted solely

according to the product and emissions warranties stated

elsewherein this manual.

Power Ratings

Thegross power rating for individual gas engine models is

labeledin accordancewith SAE(Societyof Automotive

Engineers)codeJ1940 (Small Engine Power & Torque

Rating Procedure),and rating performance hasbeen

obtained andcorrected in accordancewith SAEJ1995

(Revision2002-05). Torquevalues are derived at3060 RPM;

horsepower values are derivedat 3600 RPM.Actual gross

engine power will be lower and is affected by, among other

things, ambient operating conditions and engine-to-engine

variability. Givenboth the wide array of products on which

enginesare placedand the variety of environmental issues

applicableto operatingthe equipment, the gas engine will not

developthe ratedgross power when used in a given pieceof

power equipment (actual "on-site"or net power). This

difference is due to a variety of factors including, but not

limited to, accessories (air cleaner, exhaust,charging,

cooling, carburetor, fuel pump, etc.), application limitations,

ambient operating conditions (temperature,humidity,

altitude), and engine-to-engine variability. Dueto

manufacturing and capacity limitations, Briggs & Stratton

maysubstitute an engine of higher ratedpower for this

Seriesengine.

Pressure Washer Specifications

Max Outlet Pressure ....................... 2,550 PSi

Max Flow Rate............................. 2.3 GPM

ChemicalMix......................... Use asdirected

Water SupplyTemperature .......... Not to exceed IO0°F

Shipping Weight ............................. 72 Ibs.

Engine Specifications

Bore ................................. 2.69 in. (68mm)

Stroke ............................... 2.04 in. (52mm)

Displacement ........................ 11.57in. (190 cc)

SparkPlug

Type: ............. Briggs & Stratton 802592 or 5095D

SetGapTo: ...................... O.030inch(0.76ram)

ArmatureAir Gap: ........... 0.006-0.010in.(O.15-O.25mm)

Valveclearancewithvalvespringsinstalledand piston1/4in.

(6 ram)pasttopdeadcenter(checkwhenengineiscold).

Intake.................... 0.005-0.007in.(0.13-0.18ram)

Exhaust .................. 0.007-0.009in.(0.18-0.23mm)

FuelCapacity............................... 1.6Quarts

OilCapacity........................ 18Ounces(0.5 liter)

NOTE:Forpractical operation, the engine load should not

exceed 85% of rated power. Enginepower will decrease

3-1/2% for each1,000 feet (300 meters) abovesea leveland

1% for each 10° F(5.6° C) above77° F(25° C). It should

operatesatisfactorily at an angle up to 15°.

OWNER'SRESPONSIBILITIES

Followthe hourly or calendarintervals,whichever occurs first.

More frequent service is required when operating inadverse conditions noted below.

MAINTENANCESCHEDULE

MAINTENANCETASK

BeforeEach

Use

OPERATINGiNTERVALS

Every 25 Hours Every50

or Yeary HoUrSyearlyOr

Every100

Hours or

Yearly

PRESSUREWASHER

ChecWcleanwater inlet screen

Check high pressure hose X

Check detergent hose X

Checkspray gun and assembly for leaks X

Purge pump of air and contaminants X

Prepare pump for storage below 32°F See Winter Storage

ENGINE

Check oil level

Clean debris X

Changeengine oil X2

Service air cleaner X_

Service spark plug X

Service spark arrester X

Clean cooling system X2

Prepare for storage If unit is to remain idle for longer than 30 days.

SERVICEDATES

FILL IN DATESAS YOUCOMPLETE

REGULARSERVICE

' Cleanif clogged. Replaceif perforated or torn.

Change oil after the first (5) operating hours and every 50 hours or yearly thereafter. Changesooner when operating under dirty or dusty conditions.

Replacemore often under dirty or dusty conditions.

General Recommendations

Regularmaintenancewill improve the performanceand

extendthe life of the pressure washer. Seeany Searsor

other qualified service dealerfor service.

Thepressure washer warranty doesnot cover items that

havebeen subjectedto operator abuseor negligence.To

receivefull valuefrom the warranty, the operator must

maintain pressure washer as instructed in this manual

including proper storage as detailedin Storage.

Someadjustments will needto be madeperiodically to

properly maintain your pressure washer.

All serviceand adjustments should be madeat least once

eachseason.Follow the requirementsin the Maintenance

Schedulechart above.

NOTE:Oncea year you should clean or replacethe spark

plug and replacethe air filter. A new spark plug and clean air

filter assure proper fuel-air mixture and help your engine run

better and last longer.

Pump Oil

DONOTattempt any oil maintenanceon this pump.The

pump is pre-lubricated and sealedfrom the factory, requiring

no additional maintenancefor the life of the pump.

EmissionsControl

Maintenance, replacement, or repair of the emissions

control devices and systems may be performedby any non-

road enginerepair establishmentor individual. However,

to obtain "no charge" emissions control service, the work

must be performed by a factory authorized dealer.Seethe

Emissions Warranty.

Before Each Use

1. Checkengine oil level.

2. Cleandebris.

3. Checkwater inlet screen for damage.

4. Checkhigh pressure hose for leaks.

5. Checkcleaningtank for damage.

6. Checkgun and nozzleextension assembly for leaks.

7. Purge pump of air and contaminants.

PRESSUREWASHERMAINTENANCE

Clean Debris

Daily or before use, cleanaccumulated debris from cleaning

system. Keeplinkage, spring and controls clean. Keeparea

around and behind muffler free from any combustible debris.

Inspect cooling air slots and openings on the pressure

washer.These openings must be kept cleanand

unobstructed.

Cleaningsystem parts should be kept cleanto reducethe risk

of overheatingand ignition of accumulated debris.

• Usea damp cloth to wipe exterior surfaces clean.

NOTICE

Jlmproper treatment of pressurewasher can damageit and

_horten its life. _ ....

[, DONOTinsertanyobjectsthroughcoolingslots.

• Usea soft bristle brush to loosen cakedon dirt, oil, etc.

• Usea vacuum cleanerto pick up loose dirt and debris.

Check and Clean Inlet Screen

Examinegarden hose inlet screen.Cleanif it is clogged or

replaceif it is torn.

Check High Pressure Hose

High pressure hoses can developleaks from wear, kinking,

or abuse. Inspect hose beforeeach use. Checkfor cuts,

leaks,abrasions, bulging of cover, or damageor movement

of couplings. If any of these conditions exist, replacehose

immediately.

WARHJHG

The high pressure stream of water that this

_ quipment produces cancut through skin and its

underlyingtissues, leadingto serious injury and

_ossibleamputation.

• NEVERrepairhighpressurehose.Replaceit.

, ReplacementhoseratingMUSTexceedmaximumpressure

ratingof unit.

Check Gunand Hozzle Extension

Examinehose connectionto spray gun and makesure it is

secure.Testtrigger by pressing it and making sure it springs

back into placewhenyou releaseit. Put safety latch in UP

position and test trigger. Youshould not beable to press

trigger. Replacespray gun immediately if it fails any of these

tests.

Hozzle Maintenance

A pulsing sensation felt while squeezingthe spray gun trigger

may be caused by excessivepump pressure.The principal

cause of excessivepump pressure is a spray tip clogged or

restricted with foreign materials,such as dirt, etc. To correct

the problem, immediately cleanthe spray tip following these

instructions:

1. Shut off engine andturn off water supply.

2. ALWAYSpoint spray gun in a safe direction and squeeze

spray gun trigger to releaseretainedhigh water

press u re.

WARHJHG

Thehigh pressure stream of water that this

equipment produces can cut through skin and its

,_ underlying tissues, leading to serious injury and

)ossible amputation.

Spraygun traps high water pressure, evenwhen

engine is stopped and water is disconnected,

which cancause injury.

• Keephighpressurehoseconnectedto pumpandspraygun

whilesystemispressurized.

, ALWAYSpointspraygunin safedirectionandsqueezespray

guntrigger,to releasehighpressure,everytimeyoustop

engine.Engagetriggerlockwhennotin use.

3. Removespray tip from end of nozzleextension.

4. Usea small paperclip to free any foreign material

clogging or restricting spray tip (A).

Removenozzleextension from spraygun.

Using a garden hose, removeadditional debris by back

flushing waterthrough nozzleextension. Backflush

between30 to 60 seconds.

7. Reinstallspray tip into nozzleextension.

8. Reconnectnozzleextensionto spray gun.

9. Makesure garden hose is connectedto water inlet.

Checkthat high pressure hose is connectedto spray gun

and pump. Turn on water.

10. Engagetrigger lock on spray gun and start engine

following instructions How to Start Your Pressure

Washer.

11. Test pressure washer by operating with eachquick

connect spray tip.

G-Ring Maintenance

PurchaseanO-Ring RepairKitatyour localSearsor by calling

1-OO8-4-MY-HOME(469-4663} or onlineat www.sears.com.It

is notincludedwith thepressurewasher.This kit includes

replacemento-rings,rubberwasherandwaterinletfilter.Referto

theinstructionsheetprovidedin thekit to serviceyour unit's

o-rings.

WARHIHG

The high pressure stream of water that this

,_ equipment produces cancut through skin and itsunderlyingtissues, leadingto serious injury and

)ossible amputation.

• NEVERrepairleakingconnectionswith sealantof anykind.

Replaceo-ringor seal.

ENGJHEMAINTENANCE

WARNING

_'_ Unintentionalsparking can result in fire or

_¢ electric shock.

WHENADJUSTINGORMAKINGREPAIRSTOYOUR

PRESSUREWASHER

. Disconnectthesparkplugwirefromthesparkplugandplace

thewirewhereit cannotcontactsparkplug.

WHENTESTINGFORENGINESPARK

• Useapprovedsparkplugtester.

. DONOTcheckfor sparkwith sparkplugremoved.

Oil

OffRecommendations

We recommendthe useof Briggs & Stratton Warranty

Certified oils for best performance. Otherhigh-quality

detergent oils are acceptableif classified for service SF,SG,

SH, SJ or higher. DONOTusespecial additives.

Outdoortemperatures determine the proper oil viscosity for

the engine. Usethe chart to selectthe best viscosity for the

outdoor temperature rangeexpected.

104

86 _ m"

32 _

-4

-22

°C

_1-- 30

> _ 0

:__ 0

_m n g

= -lO

°LIj L--2°

* Below40°F(4°0)theuseof SAE30will resultinhardstarting.

** Above80°F(27°0)theuseof 10W30maycauseincreasedoil

consumption.Checkoil levelmorefrequently.

0@i OTE:Synthetic oil meeting iLSACGF-2,API

certification mark and APIservice symbol with

"SJ/CF ENERGYCONSERVINGor higher, is an

acceptableoil atall temperatures. Use of synthetic oil

does not alter required oil changeintervals.

CheckingOil Level

Oil levelshould be checkedprior to each useor at least every

5 hours of operation. Keepoil level maintained.

1. Makesure pressure washer is on a levelsurface.

2. Removeoil dipstick and wipe dipstick with cleancloth.

Replaceand tighten dipstick. Removeand and check oil

level.

3. Verify oil is at "Full" mark on dipstick. Replaceand

tighten dipstick.

AddingEngineOil

Makesure pressure washer is on a levelsurface.

Checkoil level as described in CheckingOil Level

If needed,slowly pour oil into oil fill openingto the

"Full" mark on dipstick. DONOToverfill.

NOTICE

Overfilling with oil may causethe engineto not start, or

hard starting.

DONOToverfill.

IfovertheFULLmarkon dipstick,drainoil to reduceoil levelto

FULLmarkondipstick.

4. Replaceand tighten dipstick.

ChangingEngineOil

Changeengine oil after the first 5 hours and every 50 hours

thereafter. If you are usingyour pressure washer under

extremely dirty or dusty conditions, or in extremely hot

weather,change oil more often.

CAUTION

Avoid prolonged or repeatedskin contact with usedmotor

oil.

Usedmotoroil hasbeenshownto causeskincancerin certain

laboratoryanimals.

Thoroughlywashexposedareaswith soapandwater.

KEEPOUTOFREACHOFCHILDREN.DON'T

POLLUTE.CONSERVERESOURCES.RETURN

USEDOILTOCOLLECTIONCENTERS.

Changeoil while engine is still warmfrom running,as

follows:

1. Drain fueltank by running pressure washer until fuel

tank is empty.

2. Disconnectspark plug wire and keepit away from spark

plug.

3. Cleanarea around oil fill, remove oil fill cap/dipstick.

Wipe dipstick clean.

4. Tipyour pressure washer to drain oil from oil fill into a

suitable container making sure you tip your unit away

from spark plug. When crankcaseis empty, return

pressure washer to upright position.

5. Slowly pour recommended oil (about 18 oz.)into oil fill

opening. Pauseto permit oil to settle. Fillto "Full" mark

on dipstick.

6. Wipe dipstick cleaneachtime oil levelis checked. DO

NOToverfill.

7. Replaceand tighten dipstick.

8. Wipe up any remaining oil.

9. Reconnectspark plug wire to spark plug.

Service Air Cleaner

Your engine will not run properly and may be damagedif you

run it with a dirty air cleaner.

Servicethe air cleaneronceevery 25 hours of operation or

onceeachyear, whichever comesfirst. Servicemore often if

operating under dirty or dusty conditions. Replacementsare

availableat your local Searsservice center.

To service the air cleaner, follow these steps:

1. Loosenscrew (A) and tilt cover (B) down.

2. Carefullyremove cartridge (C)assembly.

3. To cleancartridge, gently tap pleatedpaperside on a flat

surface.

4. Reinstallcleanor newcartridge assembly inside cover.

5. Insert cover's tabs (8) into slots in bottom of base(E).

6. Tilt cover up and tighten screw securelyto base.

NOTE:You canpurchase new air filter elements bycalling

1-800-4-MY-HOIVlE(469-4663).

ServiceSparkPlug

Servicethe spark plug every 100 hours of operation or

yearly, whichever occurs first.

1. Cleanareaaround spark plug.

2. Removeand inspect spark plug.

3. Replacespark plug if electrodesare pitted, burned or

porcelainis cracked. Usethe recommended replacement

plug. See Specifications.

4. Checkelectrode gap with wire feelergauge and set spark

plug gap to 0.030 inch (0.76 ram) if necessary.

_. f_ ..........._

5. Install spark plug and tighten firmly.

NOTE:You canpurchase a new spark plug bycalling

1-800-4-1VlY-HOIVlE(469-4663).

Spark Arrester Service

Your engine is not factory-equipped with a spark arrester. In

some areas,it is illegal to operatean engine without a spark

arrester. Checklocal laws and regulations. A spark arrester is

availablefrom your nearest Searsservicecenter. If you need

to order a spark arrester, pleasecall 1-SOO-4-MY-HOME

(46g-4663).

Thespark arrester must be serviced every 50 hours to keepit

functioning as designed.

If the engine has been running,the muffler will be very hot.

Allow the muffler to cool before servicing the spark arrester.

WARHIHG

s_ Contact with muffler area can result in serious

burns.

,_ Exhaustheat/gases can ignite combustibles,structures or damagefuel tank causing a fire.

• DO NOTtouch hot parts and AVOID hot exhaust gases.

. Allow equipment to cool before touching.

• Keepat least 5feet (152 cm) of clearanceon all sides of

pressure washer including overhead.

• Codeof FederalRegulation (CFR)Title 36 Parks, Forests,and

Public Property require equipment powered by an internal

combustion engine to havea spark arrester, maintained in

effective working order, complying to USDAForestservice

standard 5100-1C or later revision. Inthe State of California a

spark arrester is requiredunder section 4442 of the California

Public resources code. Other statesmay havesimilar laws.

• Remove spark arrester screen for cleaning and inspection.

• Replace if screen is damaged.

Air Cooling System

Overtime debris may accumulate in cylinder cooling fins and

cannot be observedwithout partial engine disassembly. For

this reason,we recommendyou havea qualified Sears

servicedealer cleanthe cooling system per recommended

intervals (see MaintenanceSchedule). Equallyimportant is to

keeptop of engine freefrom debris. See CleanDebris.

Keepareaswithin heavyline clearof debris.

i i i

AFTEREACHUSE

Water should not remain in the unit for long periods oftime.

Sedimentsor mineralscan deposit on pump parts and

"freeze" pump action. Followthese proceduresafter every

use:

1. Flush detergentsystem byturning its detergent shut-off

valveto "Off" position and run pressure washer with

black detergent spray tip. Flushfor oneto two minutes.

2. Shut off engine,turn off water supply, point gun in a

safe direction and squeezetrigger to relievetrapped

pressure, engagetriggerlockon spraygunand let engine

cool.

WARHIHG

Thehigh pressurestream of water that this

equipment produces cancut through skin and its

_ nderlying tissues, leadingto serious injury and

_ossibleamputation.

Spray gun traps high water pressure,evenwhen

engine is stopped and water is disconnected,

which can cause injury.

. Keephighpressurehoseconnectedto pumpandspraygun

whilesystemispressurized.

• ALWAYSpointspraygunin safedirectionandsqueezespray

guntrigger,to releasehighpressure,everytimeyoustop

engine.Engagetriggerlockwhennotin use.

3. Disconnect hosefrom spraygun and high pressure

outlet on pump. Drainwater from hose, gun, and nozzle

extension. Usea rag to wipe off the hose.

4. Empty pump of all pumped liquids by pulling recoil

handle about6 times. This should remove most liquid in

pump.

5. Coil high pressure hoseand properly hang it on hook

provided on handle.

6. Store unit in a clean, dry area.

7. If storing for morethan 30 dayssee Long Term Storage

on next page.

WARHIHG

, uel and its vapors are extremely flammable and

explosive.

Fireor explosion cancause severeburns or

death.

WHENSTORINGFUELOREQUIPMENTWITH FUELIN TANK

. Storeawayfromfurnaces,stoves,waterheaters,clothes

dryers,or otherappliancesthathavepilotlightor otherignition

sourcebecausetheycanignitefuelvapors.

Page is loading ...

Craftsman 580.752050 Owner's manual

Brand: Craftsman

Model: 580.752050

Category: High-pressure cleaners

Type: Owner's manual

This manual is also suitable for

Download PDF

report

in other languages

español: Craftsman 580.752050 El manual del propietario

Craftsman 580.752050 Owner's manual

This manual is also suitable for

Craftsman 580.752050 Owner's manual

in other languages

Related papers

Other documents