Daewoo GB14F8T1 User manual

Brand: Daewoo

Model: GB14F8T1

Category: CRT TVs

Type: User manual

This manual is also suitable for

VIDEO AUDIO

STAND-BY POWER REC

REC

Instruction manual

Colour televideo

GB14F8T1

GB20F8T2

GB21F1T2

Please keep the video machine’s guarantee card and receipt safe for warranty

purposes.

WORTH

knowing

Precautions

Read carefully through this manual to familiarise yourself with this high-

quality televideo.

Make sure the rating of your household electricity supply matches that shown

on the back of the televideo.

Refer to this chapter and the “Initial installation” chapter (pages 4-9) to help

you install and adjust your televideo.

Do not…

expose the televideo to high levels of humidity and heat, to avoid the risk of

fire and electric shock.

open the televideo. Have a qualified technician carry out repairs.

connect the televideo to the power supply if you have just moved it from a

cold to warm environment. This can result in condensation inside the recorder

and cause serious damage to the machine and cassettes. Wait around two

hours to allow it to reach room temperature.

Make sure…

the televideo is placed on a steady, flat surface.

you place the televideo where there is good ventilation all around.

you clean the televideo only with a soft, lint-free cloth; do not use aggressive

or alcohol-based cleaning agents. (Unplug the set from the mains)

you disconnect the power supply if the televideo appears to be working

incorrectly, is making an unusual sound, has a strange smell, has smoke

emitting from it or liquids have got inside it.

Have a qualified technician check the televideo.

you disconnect the power supply and aerial if you will not be using the

televideo for a long period or during a thunderstorm.

The power cable must be fitted with a fused plug approved by

ASTA or BSI to BS 1362 and provided with a 5A fuse.

The fuse cover must always be securely replaced. If the televideo is

not worikng, the fuse may need replacing (see also “Electrical

Connection” on page 4). (U.K. Only)

For your own safety!

There are no components in this televideo you can service or

repair yourself.

Do not open the case of the televideo. Only allow qualified

personnel to repair or service your set.

This televideo is designed for continuous operation. Switching it

off does not disconnect it from the mains (stand-by). To

disconnect it from the mains, you have to unplug it.

Recording any copyright protected material may infringe a

NOTE : If the receiver is moved or placed in a different direction, the main power switch must be

switched off for at least 15 minutes in order to take out colour purity errors on the screen.

WORTH

knowing

Contents

Controls

The remote control unit

The televideo, On-screen display

Initial installation

Moulded plugs

Connecting up the televideo, Fitting the remote control’s batteries

Setting time and date

Tuning in stations, EDIT, Manual Tuning

8~10

Playing cassettes

Playing back

Still, Variable picture search, Continuous play

Recording cassettes

Simple recording, One touch recording (OTR)

Timer recording using VideoPlus+

When record time overlaps, Watching Programmes while recording

Normal timer recording

Timer Review-erasing or changing

18~19

More functions

Accessing the beginning of the next recording,Accessing the beginning of the previous

recording, Resetting the counter to zero, Accessing counter zero position

Cassettes, V-Lock, Child Lock, Mute

Picture adjustments, picture type selection, Changing on-screen displays

Television timer, Snooze automatic

VideoPlus+ guide numbers

Teletext, teletext character set

Connections and copying

copying, Assembling

Scart socket

Appendix

Before you ask a specialist

Playing back, Simple recording, Auto tracking, One touch recording

Index, Technical data

Your product guarantee

31/32

On the following pages, the pictures show the buttons you press on the remote control to

perform the function, and what you should see in the on-screen display or machine

display (if present)

VideoPlus+ is a trademark applied for by Gemstar Development Corp.. The VideoPlus+

system is manufactured under license from Gemstar Development Corporation.

Before doing anything with the televideo, please

read the chapter “Initial installation”.

The remote control is the principle means of control, but the main playback and

record functions are also available on the front of the machine.

Press the main power switch on the front panel to turn on the set,

then press button.

CONTROLS

The remote control unit

TV stations-input sockets

To switch combined TV/video on and off (stand by)

to reset the counter

to wind the cassette to counter position 0:00:00to

Record monitoring

(only 2Tuners Model), Auto tracking

to select on-screen displays

Sound on/off

a button for selecting input sources for recording:

Volume up/down

V-lock up/down

To select channels and adjust

Manual tracking up/down

Teletext page up/down

playback start/stop.

pause while recording,

still while playing back

rewinding/fast forwarding a cassette from Stop, or

picture search backwards/forwards from playback mode

the menu control.

the controls for timer recording using the VideoPlus+

codes via on-screen display

Teletext on/off

Teletext size

the record or OTR button

(One Touch Recording means : each time you press the

button recording is extended by 30 minutes)

FAVOURITE/NORMAL1/NORMAL2

a button that doubles the maximum recording time for

very long recordings (SP/LP) : (only U.K. Model)

button for the sleep timer (press repeatedly)

max. 7 m

30˚ | 30˚

CONTROLS

The televideo

On-screen display

The televideo’s menu system

gives you easy-to-understand

access to the less used

functions such as tuning to

stations, clock setting and

more.

The menus show you which

button to press for the next

step.

In addition, some other

functions appear on screen if

you want (press RECALL up

to 3 times for on-screen

displays).

Press the main power switch on the front panel to

turn on the set, then press POWER( ) button.

NOTE : The combined TV/video close menus automatically after approx. 1 minute.

if no entry is made.

VIDEO AUDIO

STAND-BY POWER REC

REC

Video input

Audio input

REC : Record

PLAY : Play

Indicator

STAND BY : STAND BY(Red)

POWER : Operation(Green)

REC : Record(Yellow)

REW / FF:

Rewind and Fast forward wind

STOP/EJECT:

To stop and to eject

the loaded cassette

VOLUME Down/Up Buttons

PROGRAM Down/Up Buttons

MAIN POWER

SWITCH

HEAD

PHONE

Remote

sensor

MAIN MENU

PICTURE

TV TIMER

RECORD TIMER

PRESET

MISCELLANEOUS

SELECT

ENTER

MENU EXIT

TV TIMER

01:01:1997 WED

TIME 02:30

ON TIMER 06:00 OFF

PR 01

OFF TIMER 00:00 OFF

DATE

SELECT

MOVE

CLEAR CLEAR

MENU EXIT

01 ABCC

REW

– 0:01:33

example

For your own safety read the following instructions carefully before attempting to

connect this unit to mains.

Initial

INSTALLATION

Moulded plugs

Should it be necessary to remove a moulded on plug from the mains cable, it

should be cut off and replaced with a suitable replacement.

If the terminals in the plug are unmarked or you are in any doubt as to the correct

connections, consult a qualified electrician.

The wires in this mains lead are coloured in accordance with the following

code

Blue Neutral

Brown Live

As the colour of the wires in the mains lead of this appliance may not

correspond with the coloured markings identifying the terminals in your

replacement plug proceed as follows.

The wire which is coloured blue must be connected to the terminal which is

marked with letter N or coloured black.

The wire which is coloured brown must be connected to the terminal which is

marked with letter L or coloured red.

The moulded plug cannot be used for any other appliance, therefore remove

the fuse and dispose immediately and safely to prevent anyone, especially

children from plugging it in to a wall socket, which will create a safety

hazard.

After replacement of the fuse in the moulded plug, the fuse cover must be

refitted. If the fuse cover is lost a replacement cover must be obtained. The

colour of the correct replacement fuse cover is that of the coloured insert in

the base of the plug or the colour that is embossed in words in the base of

the plug recess or elsewhere on the plug. Always state this colour when

ordering a replacement fuse cover.

Only 5 amp. replacement fuses which are ASTA approved to BS 1362 should

be fitted. (U.K. Only)

We recommend the use of a good quality plug.

This symbol means that this unit is double insulated, an earth connection is not

necessary.

Caution :

To prevent electric shock, do not remove any covers.

Caution :

No user serviceable parts inside, refer servicing to qualified service personnel.

Initial

INSTALLATION

Caution :

When operating this unit on 220-240V mains supply, please note that when the power

switch is in the off mode, the unit is not disconnected from the mains supply. However,

please be assured that it is perfectly safe to leave the unit connected to the mains supply.

Place your televideo

horizontally on a flat, steady base so that air can circulate around it for ventilation.

away from humidity and heat, magnetic fields, such as those from loudspeakers

etc., and with no heavy objects placed on top.

Initial

INSTALLATION

Connecting up the televideo

Fitting the remote control’s batteries

Switch off all components when connecting or disconnecting cables.

Plug the aerial cable into the “ANT” socket of the televideo.

Make sure the rating of the household mains supply matches the rating

shown on the back of the televideo.

Now plug in the mains lead.

Fit the batteries, size 1.5V AAA as shown above.

Protect your environment by returning used batteries to your dealer. Since

batteries contain toxic substances they require special disposal methods.

Make sure the batteries are always of the same type and age, and remove

them from the remote control if you are not using it for a long period.

Remove the battery cover

on the reverse side of the

remote control.

Install two barreries

(“AAA” size) into the

remote control.

Replace the battery

cover.

The buttons to use

are marked on the

following pages.

Initial

INSTALLATION

Setting time and date

Switch your televideo on.

Call the televideo’s MAIN MENU.

Move the cursor down to the “TV TIMER”line.

Confirm by pressing the ENTER/STOP button.

Set the numbers for the exact time and the correct

date. Both the On timer and the off timer can be

switched ON or OFF but both must be on to enable the

timer to function.

DATE : dd/mm/yy

TIME : Hour/Min

Store leaving “TV TIMER”

Continue with the following page.

Mistake or change ?

Move curson to the position you wish to correct by using

/ / and RE-ENTER on

the remote control.

If you do not set ‘DATE’ and ‘TIME’ menu, you can not set ‘on/off Timer’.

Timer controlled events require the exact time

and the correct date.

Press the main power switch on the front panel

to turn on the set, then press button.

MAIN MENU

TV TIMER

RECORD TIMER

PRESET

MISCELLANEOUS

PICTURE

SELECT

ENTER

MENU EXIT

MAIN MENU

PICTURE

RECORD TIMER

PRESET

MISCELLANEOUS

TV TIMER

SELECT

ENTER

MENU EXIT

TV TIMER

01:01:1997 WED

TIME 02:30

ON TIMER 06:00 OFF

PR 01

OFF TIMER 00:00 OFF

DATE

SELECT

MOVE

CLEAR CLEAR

MENU EXIT

01 ARD

Have handy a TV guide or newspaper to help you to identify the stations.

Initial

INSTALLATION

Tuning in stations

(If you see “AV” instead of “PR”, press

the button)

If not on-screen, call the televideo’s

“MAIN MENU”.

AUTOMATIC TUNING SYSTEM

Select the PRESET menu at the MAIN MENU.

Place the cursor to “ATSS” with the up/down button.

Press the ENTER button until the tunning screen appears above the PRESET

menu.

The cursor will move from left to right on the VHF-L line, then VHF-H, then UHF.

Please wait until the EDIT menu appears.

MAIN MENU

PICTURE

TV TIMER

RECORD TIMER

PRESET

MISCELLANEOUS

SELECT

ENTER

MENU EXIT

ATSS SETTING

PR08 UHF

MENU EXIT

01 ARD

Initial

INSTALLATION

EDIT

The EDIT menus shows you the programme position assignment.

You can change this programme position assingment according to

your personal preferences.

SKIPPING THE CHANNELS

You can select skip “YES” or “NO” with the SKIP button.

A programme marked with SKIP “YES” is skipped when changing

channel using the

/ button .

A skipped programme number selected by NUMBER button 0…9

will be displayed in red.

DELETE PROGRAMME POSITION DATA

Position the cursor to programme number to delete with the

up/down. LEFT/RIGHT buttons.

Press the DELETE button. while this is being carried out the “DELETE

pro.NO”. appears and the “deleted” programme number will

transfer to programme no.69 and change skip to “yes”.

Any programme that was in No.69 will be transferred to programme

No.68.

CHANGING THE ORDER OF THE CHANNELS

Position the cursor to programme number to move and press the

SWAP button. The “SWAP P01 TO P01” will appear.

Position the cursor to programme number to exchange and press the

SWAP button. Two programmes will be exchanged.

ENTER A STATION NAME

Press the stop button at the EDIT MODE.

station name tables appears above the screen.

Select station name in the station name list with

/ button and

press ENTER button.

If you want to delete a station name, select “-----”.

If you can’t find the desired name in the list, you can enter your

own.

To do so, move the cursor to the “----” and press ENTER button.

Using the

/ button, select the desired, letter, number or blank.

Press the

button to select the next position.

(MAIN MENU PRESET EDIT)

EDIT

PR NAME SKIP PR NAME SKIP

00 ------ YES 05 ------ NO

01 ------ YES 06 ------ NO

02 ------ YES 07 ------ NO

03 ------ YES 08 ------ NO

04 ------ YES 09 ------ NO

SELECT

DELETE

SWAP

SKIP

NAME

MENU EXIT

EDIT

---- CH5 RTL1 KABE N3

BBC1 SAT RTL2 3SAT SWF3

BBC2 ARD SAT1 1PLU SFB3

ITV ZDF PRO7 BR3 MDR3

CH4 WDR3 PREM HR3 RB3

SELECT

ENTER

MENU EXIT

EDIT

A - - -

SELECT

CHANGE

ENTER

MENU EXIT

Manual Tuning

Initial

INSTALLATION

You can also call up the PRESET menu at the

MAIN MENU.

Press the NUMBER Button 0…9 or PR

button to select a programme number you want.

The screen will change according to the selected

programme number.

SEARCHING FOR A CHANNEL

Locate the cursor to SEARCH UP or DOWN with

/ button at the MANUAL TUNING SCREEN

and then press the enter.

The tuning screen will appear and the cursor will

move from left to right.

To stop searching, press the MENU button.

Pressing and holding down the

/ button

during 3seconds, the band will change as

following.

After locating a station, press the menu button.

Select station name and memorize programme

number with UP/DOWN button or the NUMBER

button 0…9.

use

/ button to set the SKIP to ‘NO’

Press the “enter” key when the cursor is put on

the “STORE TO”, it is possible to memorise the

searched channel.

If you want to select “SKIP YES” PR. use the

digit key.

FINE TUNING

If you are unable to get a good picture or sound

because of a poor broadcasting signal, it is

possible to adjust the fine tuning.

Select the FINE TUNING at the PRESET MENU

and FINE TUNING SCREEN will appear.

Press

/ button to get a good picture and

sound you want and to memorize press the

ENTER.

MANUAL TUNING

PR 08

SKIP NO

SEARCH UP

STATION NAME ----

STORE TO PR08

SELECT

MOVE

MENU EXIT

MANUAL TUNING

PR08 UHF

CHANGE

MENU EXIT

FINE TUNING

PR08 UHF

||||||||||||||||||

|||||||||||||||||||||

CHANGE

ENTER

VHF-L VHF-H UHF

Your televideo is swiched on by the main power switch on the front panel and by

the button.

PLAYING

cassettes

Playing back

Load the cassette by pushing it

smoothly and squarely into the

cassette bay, with its windows

pointing up.

Start playback.

Stop playback.

Eject the cassette.

Fast forward or rewind the cassette

from stop.

A smaller picture may be seen while switching from the

SEARCH mode to the PLAYBACK mode.

This is NOT a sign of malfunction.

When you load a protected cassette (e.g. pre-recorded film,

see page 21) playback starts automatically.

PLAY ( ) switches back to normal playback.

During still, or search, you don’t hear the sound.

If the still picture is jittering, you can steady it by using the

VOL/V-LOCK buttons.

You can reduce horizontal interference stripes resulting from

inaccurate tracking (when playing tapes of poor quality or

recorded on other machines) by using the PR/TRK buttons during

playback or try auto tracking using A.TRK

After approx. 5 minutes in still, the cassette plays back

automatically.

Search and picture functions -page 20.

VIDEO AUDIO

F F

PLAY ST/EJREW

STAND-BY POWER REC/OTR

REC

PLAY

0:00:00

STOP

0:00:00

EJECT

01 BBC1

0:15:00

03 ITV

REW

0:09:00

03 ITV

PLAYING

cassettes

Still

Variable picture search

Continuous play

NOTE : This set has the function of NTSC playback. (SP tape only)

Do not use NTSC SLP (x3) tape.

Still picture from playback.

Each press of the button advances the picture one frame.

PLAY (

) switches back to normal playback.

STILL

0:00:00

Starting from playback you can control search speed in 2

steps either forwards ( ) or backwards ( ). Press

repeatedly.

PLAY (

) switches back to normal playback.

Call the televideo’s“MAIN MENU”.

Move the cursor down to the “AUTO REPEAT ON” line.

Confirm.

Cassettes with…

…open safety hole:

play

end of cassette rewind play…

…closed safety hole :

play

end of cassette rewind play…

CUE

0:10:00

REV

0:09:00

REP

00:25:33

MAIN MENU

PICTURE

TV TIMER

RECORD TIMER

PRESET

MISCELLANEOUS

SELECT

ENTER

MENU EXIT

MISCELLANEOUS

CHILD LOCK

CHARACTER SET WEST

VIDEOPLUS PRESET

AUTO REPEAT ON

SELECT

CHANGE

MENU EXIT

• OTR PREPARATION

Before setting OTR, MAKE SURE THAT ……

The cassette tape has the safety tab.

The tape is long enough to record the program.

During recording you can switch the screen off pressing button.

If you want to record from a source connected to your video

see page 26.

Even if you turn off the POWER, REC/OTR will continue for the rest

of the time.

You can release the OTR mode by pressing “STOP” during REC mode.

The video stops automatically, if pause exceeds five minutes.

If the display shows “AV” instead of “PR” press button.

Search and picture functions -pages 20.

The TV stations on your televideo have been tuned in (pages 8/9).

The televideo is switched on.

RECORDING

cassettes

Simple recording

One touch recording-OTR

Load a cassette with its safety tab in

place (see page 21).

Choose the station whose

programme you want to record.

If the programme you wish to record

is very long, double the possible

recording time with “LP” (Long Play).

Up to eight hours with an E240

cassette.

Start your recording.

If you wish to interrupt recording

briefly – then continue.

Stop your recording.

Choose the station you want and

press the button once for every 30

minutes of programme you wish to

record.

STOP

0:00:00

01AB

REC

0:00:12

12CD

PAUSE

0:10:34

12CD

STOP

1:15:22

12CD

OTR

0:01:10

0:30

12CD

STOP

0:00:00

12CD

VIDEOPLUS

NO ---------

INTERVAL ONCE

0-9 DIGIT

INTERVAL

ENTER

VIDEOPLUS

EXIT

VIDEOPLUS

NO 58624 -----

INTERVAL DAILY

0-9 DIGIT

INTERVAL

ENTER

VIDEOPLUS

EXIT

REC EVENT 1

INTERVAL DAILY

PDC OFF

DATE 21/01 TUE

START 16:30

END 16:35

PR 02

SPEED SP

SELECT

MOVE

MENU EXIT

RECORD TIMER

DATE START END PR PDC

1 DAILY 16:30 16:46 02 OFF

2 --/-- --:-- --:-- --:-- ---

3 --/-- --:-- --:-- --:-- ---

4 --/-- --:-- --:-- --:-- ---

5 --/-- --:-- --:-- --:-- ---

6 --/-- --:-- --:-- --:-- ---

SELECT

ENTER

CLEAR CLEAR

MENU EXIT

RECORDING

cassettes

Timer recording using VideoPlus+

For timer recordings, clock, date, and stations

must be set correctly (pages 7-9).

Load a cassette with its safety tab in place (see

page 21) and with sufficient free space for the

recording.

Call the VideoPlus+ menu.

From your TV magazine, type in the number next to the

programme you want to record.

Select to record

ONCE, DAILY(1x), WEEKLY(2x)

Confirm

If you want to extend the recording time by 1 minutes

steps.

Press the menu button to confirm.

You can switch your televideo off.

(Do not use the main power button on the front panel of the set.) The televideo will switch

on and off automatically to record the timer event.

If you do not set the clock, when you press the VideoPlus+ button to set the timer recording,

this set automatically changes to the “TV TIMER” menu.

If you don’t have the VideoPlus+ numbers see page 17 for the normal timer.

If you have made a mistake, move back to the relevant position with the button and

change the setting.

During recording you can switch the screen off pressing button.

The screen will indicate if the station is not programmed (pages7~9) or if the station has no

VideoPlus+ guide number (pages 24).

Should programmings overlap, you get a warning.

In the case of error messages correct the input or check the date and time on your televideo

(also check your TV guide).

RECORDING

cassettes

When record time overlaps

Watching programmes while recording (Only 2 Tuners Model)

When setting the Programmable Timer, be careful not to overlap the preset

times.

If you happen to overlap the preset Programs, the END Time has priority and the

overlapped Programmes cannot be recorded.

NOTE :

MAKE SURE THAT …

The clock is adjusted to current time

The safety tab is not missing on the cassette tape.

The tape is long enough to record the desired programme.

* If you program events without setting the time, it will be automatically

returned to “TV TIMER” mode.

If you program events that overlap, at least one of your events will not record

correctly.

If the start time you want to enter does not correspond to the PDC-time or if you

just want to record a part of a programme, you have to switch off PDC. Otherwise

the recorder won’t record.

Just switch over to another

programme using PR/PAGE

or the NUMBER BUTTONS.

To check the recording switch to

the recorder (and back) using the

MONITOR/A.TRK button.

19:00 20:00 21:00 22:00

PROGRAMMING

PROGRAMME 1

PROGRAMME 2

PROGRAMME 3

PROGRAMME 1

PROGRAMME 2 PROGRAMME 3

RECORDING

NOT RECORDED

REC

0:00;05

01 ARS

02 KBS

REC

0:02:12

REC PR

02 KBS

Page is loading ...

Daewoo GB14F8T1 User manual

Brand: Daewoo

Model: GB14F8T1

Category: CRT TVs

Type: User manual

This manual is also suitable for

Download PDF

report

Daewoo GB14F8T1 User manual

This manual is also suitable for

Daewoo GB14F8T1 User manual

Related papers

Other documents