Lexmark 20D0000 - X 340 MFP B/W Laser User manual

Brand: Lexmark

Model: 20D0000 - X 340 MFP B/W Laser

Category: Laser/LED printers

Type: User manual

www.lexmark.com

User’s Guide

January 2006

X340, X340n, X342n MFP

Edition: January 2006

The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC.,

PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,

THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express

or implied warranties in certain transactions; therefore, this statement may not apply to you.

This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will

be incorporated in later editions. Improvements or changes in the products or the programs described may be made at any time.

Comments about this publication may be addressed to Lexmark International, Inc., Department F95/032-2, 740 West New Circle Road, Lexington, Kentucky

40550, U.S.A. In the United Kingdom and Eire, send to Lexmark International Ltd., Marketing and Services Department, Westhorpe House, Westhorpe,

Marlow Bucks SL7 3RQ. Lexmark may use or distribute any of the information you supply in any way it believes appropriate without incurring any obligation

to you. To obtain additional copies of publications related to this product, visit the Lexmark Web site at www.lexmark.com.

References in this publication to products, programs, or services do not imply that the manufacturer intends to make these available in all countries in which

it operates. Any reference to a product, program, or service is not intended to state or imply that only that product, program, or service may be used. Any

functionally equivalent product, program, or service that does not infringe any existing intellectual property right may be used instead. Evaluation and

verification of operation in conjunction with other products, programs, or services, except those expressly designated by the manufacturer, are the user’s

responsibility.

UNITED STATES GOVERNMENT RIGHTS

This software and any accompanying documentation provided under this agreement are commercial computer software and documentation developed

exclusively at private expense.

Safety information

• Connect the power cord to a properly grounded electrical outlet that is near the product and easily accessible.

CAUTION: Do not use the fax feature during a lightning storm. Do not set up this product or make any electrical or cabling connections, such as the power

cord or telephone, during a lightning storm.

• Use only a 26 AWG or larger telecommunications (RJ–11) cord when connecting this product to the public switched telephone network.

• Refer service or repairs, other than those described in the operating instructions, to a professional service person.

• This product is designed, tested, and approved to meet strict global safety standards with the use of specific Lexmark components. The safety

features of some parts may not always be obvious. Lexmark is not responsible for the use of other replacement parts.

CAUTION: Make sure that all external connections (such as Ethernet and telephone system connections) are properly installed in their marked plug–in

ports.

• Your product uses a laser.

CAUTION: Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

• Your product uses a printing process that heats the print media, and the heat may cause the media to release emissions. You must understand the

section in your operating instructions that discusses the guidelines for selecting print media to avoid the possibility of harmful emissions.

Conventions

Note: A note identifies something that could help you.

CAUTION: A caution identifies something that could cause you harm.

Warning: A warning identifies something that could damage your product hardware or software.

This symbol indicates the presence of a hot surface or component.

CAUTION: To reduce the risk of injury from a hot component, allow the surface to cool before

touching.

Contents

Chapter 1: Finding information about the MFP.......................................... 7

Chapter 2: Setting up the MFP..................................................................... 9

Installing an overlay for another language ..................................................................... 10

Installing an additional paper tray .................................................................................. 11

Getting the MFP ready to print and scan ....................................................................... 12

Installing the software for USB attach ...................................................................... 12

Installing the software for network attach (X342n only) ........................................... 13

Getting the MFP ready to fax ......................................................................................... 14

Connecting directly to a telephone wall jack ............................................................ 14

Connecting to a telephone ....................................................................................... 15

Getting the MFP ready to copy ...................................................................................... 16

Chapter 3: Learning about the MFP .......................................................... 17

Understanding the parts of the MFP .............................................................................. 17

Using the control panel buttons ..................................................................................... 20

Using the control panel menus....................................................................................... 22

Navigating the control panel menus ......................................................................... 22

Printing a list of menu items ..................................................................................... 22

Printing a network setup page (X342n only) ............................................................ 22

Changing the default mode ...................................................................................... 24

Setting the Timeout option ....................................................................................... 24

Setting the network options (X342n only) ................................................................ 25

Using the MFP software................................................................................................. 26

Using Print Properties .............................................................................................. 26

Using Presto! PageManager (USB attach only) ....................................................... 27

Using QLINK (USB attach only) ............................................................................... 27

Chapter 4: Loading paper and original documents ................................. 28

Loading paper in the paper tray ..................................................................................... 28

Loading paper in the manual feeder .............................................................................. 32

Contents

Loading various paper types.......................................................................................... 33

Setting the paper type and size ..................................................................................... 35

Using the control panel ............................................................................................ 35

Using the computer .................................................................................................. 35

Loading original documents into the ADF ...................................................................... 36

Loading original documents on the scanner glass......................................................... 37

Selecting an output location........................................................................................... 38

Chapter 5: Printing...................................................................................... 39

Printing a document ....................................................................................................... 39

Printing an envelope ...................................................................................................... 39

Printing transparencies .................................................................................................. 40

Printing collated copies .................................................................................................. 40

Printing multiple pages on one sheet............................................................................. 40

Printing the last page first (reverse order)...................................................................... 41

Chapter 6: Faxing........................................................................................ 42

Sending a fax ................................................................................................................. 43

Sending a fax automatically ..................................................................................... 43

Sending a fax manually ............................................................................................ 43

Sending a fax to a group (broadcast fax) ................................................................. 44

Sending a fax at a scheduled time (delay send) ...................................................... 44

Adding a prefix before dialing ................................................................................... 45

Adding a pause while dialing .................................................................................... 45

Receiving a fax .............................................................................................................. 45

Receiving a fax automatically ................................................................................... 45

Receiving a fax manually ......................................................................................... 46

Forwarding faxes ........................................................................................................... 46

Printing fax activity reports............................................................................................. 47

Customizing fax settings ................................................................................................ 47

Setting up shortcuts ................................................................................................. 47

Using the Speed Dial buttons ................................................................................... 48

Using the Phone Book ............................................................................................. 48

Setting the distinctive ring ........................................................................................ 49

Setting the Station ID ............................................................................................... 49

Entering characters .................................................................................................. 50

Canceling a fax job ........................................................................................................ 50

Chapter 7: Copying..................................................................................... 51

Contents

Making a copy................................................................................................................ 51

Collating copies.............................................................................................................. 52

Copying multiple pages onto a single sheet (Paper Saver) ........................................... 52

Enlarging or reducing an image ..................................................................................... 53

Chapter 8: Scanning ................................................................................... 54

Scanning documents using the control panel (USB attach only) ................................... 55

Scanning documents using the computer (USB attach only)......................................... 55

Configuring additional applications for scanning ...................................................... 56

Scanning documents directly from an application (USB attach only)............................. 56

Scanning text for editing (OCR) ..................................................................................... 57

Customizing scan settings ....................................................................................... 58

Scanning over a network ............................................................................................... 58

Understanding Scan options.......................................................................................... 59

Chapter 9: Maintaining the MFP ................................................................ 61

Removing a toner cartridge............................................................................................ 61

Installing a toner cartridge.............................................................................................. 62

Redistributing toner........................................................................................................ 63

Replacing the photoconductor ....................................................................................... 65

Cleaning the MFP .......................................................................................................... 67

Cleaning the scanner glass ...................................................................................... 67

Cleaning the outside of the MFP .............................................................................. 67

Cleaning the inside of the MFP ................................................................................ 68

Ordering supplies........................................................................................................... 70

Recycling Lexmark products.......................................................................................... 70

Chapter 10: Troubleshooting..................................................................... 71

Setup troubleshooting .................................................................................................... 72

Removing and reinstalling the drivers software ....................................................... 74

Jams and misfeeds troubleshooting............................................................................... 75

Clearing a paper jam ................................................................................................ 76

Print and copy troubleshooting ...................................................................................... 84

Print quality troubleshooting........................................................................................... 85

Scan troubleshooting ..................................................................................................... 88

Fax troubleshooting ....................................................................................................... 89

Error messages troubleshooting .................................................................................... 91

Contents

Notices .......................................................................................................... 94

Index............................................................................................................ 102

Finding information about the MFP

The Lexmark™ X340/X340n/X342n Multifunction Printer (MFP) comes with the following resources:

Setup sheet

User’s Guide

Description Where to find

The Setup sheet gives you instructions for setting

up hardware and software.

You can find this document in the MFP box or on the

Lexmark Web site.

Description Where to find

The User’s Guide gives you instructions for using

the MFP and other information such as:

• Maintenance

• Troubleshooting

• Safety

You can find this document on the Lexmark Web site or

on the software CD that came with the MFP.

Description Where to find

The CD contains drivers, software, and

publications files.

You can find this CD in the MFP box. See the Setup

sheet for installation instructions.

Finding information about the MFP

Readme file

Web site

Record the following information (located on the store receipt and the back of the MFP), and have it

ready when you contact us so that we may serve you faster:

Machine Type number:

Serial number:

Date purchased:

Store where purchased:

Description Where to find

This file contains late-breaking information about

the MFP and software that does not appear in

other documentation, as well as information

specific to your operating system.

To access the Readme file:

1 Click Start Æ Programs or All Programs Æ

Lexmark Æ Lexmark X34x Series.

2 Select Readme.

Description Where to find

Our Web site contains a variety of information.

Note: All paths for the Web site are subject to

change.

Visit our Web site at www.lexmark.com.

1 Go to the Web site.

2 Select a country or region from the drop-down list in

the upper-left corner of the page.

3 Select the link for the information you need.

Setting up the MFP

Before unpacking your MFP, select a level, stable surface on which to set it. Allow adequate space for

air circulation and opening covers and trays.

Clearance space

Front 400 mm (16 in.)

Back 175 mm (8 in.)

Right 127 mm (3 in.)

Left 50 mm (2 in.)

Top 175 mm (7 in.)

Installing an overlay for another language

These instructions apply only if you received one or more additional language overlays with the MFP.

1 Lift and remove the overlay.

2 Choose the correct overlay for your language.

3 Align the overlay with the buttons on the MFP, and then press down until the overlay locks into

place.

Installing an additional paper tray

Your MFP supports one optional paper tray that lets you load up to 550 sheets of paper.

CAUTION: If you are installing a 550-sheet paper tray after setting up the MFP, turn the MFP

off, and unplug the power cord from the wall outlet before continuing.

1 Unpack the 550-sheet paper tray, and remove any packing material.

2 Place the paper tray in the location you have chosen for your MFP.

3 Align the holes in the MFP with the positioning posts on the 550–sheet paper tray, and lower

the MFP into place.

4 Click Start Æ Settings Æ Printers or Printers and Faxes.

Click Start

Æ Control Panel Æ Printers and Other Hardware Æ Printers and Faxes.

5 Select the MFP icon.

6 Click File Æ Properties.

7 Click the Device Settings tab.

8 Select Tray2 from the Installable Options list.

9 Select 550-Sheet Tray from the drop-down menu.

10 Click Apply.

11 Click OK.

Getting the MFP ready to print and scan

12 Connect the power cord to a wall outlet.

13 Press the Power switch.

Getting the MFP ready to print and scan

Installing the software for USB attach

You can install printer drivers and scan software for the following operating systems using the

Software and Documentation CD:

• Windows 2003

• Windows 2003 x64

• Windows XP

• Windows XP x64

• Windows 2000

Note: Drivers for Windows XP x64 bit Edition are available at www.lexmark.com.

1 Insert the Software and Documentation CD.

2 Follow the instructions on the screen.

3 Connect the USB cable, and turn on the printer.

The Plug and Play screen appears, and a printer object is created in the printers folder of the

computer.

If the software installation screen does not appear:

1 From the desktop, double-click My Computer.

For Windows XP, click Start to access the My Computer icon.

2 Double-click the CD-ROM drive icon. If necessary, double-click setup.exe.

Getting the MFP ready to print and scan

3 When the software installation screen appears, click Install or Install Now.

4 Follow the instructions on the computer screen to complete the installation.

Installing the software for network attach (X342n only)

You can install printer drivers and scan software for the following operating systems using the

Software and Documentation CD:

• Windows 2003

• Windows 2003 x64

• Windows XP

• Windows XP x64

• Windows 2000

Note: Drivers for Windows XP x64 bit Edition are available at www.lexmark.com.

1 Connect the ethernet cable, and turn on the printer.

2 Insert the Software and Documentation CD.

3 Follow the instructions on the screen.

The Plug and Play screen appears, and a printer object is created in the printers folder of the

computer.

Note: The ethernet connection will not work if the USB connection is being used. Only

one connection port can be used at a time.

If the software installation screen does not appear:

1 From the desktop, double-click My Computer.

For Windows XP, click Start to access the My Computer icon.

2 Double-click the CD-ROM drive icon. If necessary, double-click setup.exe.

Getting the MFP ready to fax

3 When the software installation screen appears, click Install or Install Now.

Follow the instructions on the computer screen to complete the installation.

Getting the MFP ready to fax

You can connect the printer to equipment such as a telephone, an answering machine, or a computer

modem. If problems occur, see Setup troubleshooting on page 72.

Note: The printer is an analog device that works best when directly connected to the wall

jack. Other devices (such as a telephone or answering machine) can be

successfully attached to pass through the printer, as described in the setup steps.

If you want a digital connection such as ISDN, DSL, or ADSL, a third-party device

(such as a DSL filter) is required.

You do not need to attach the printer to a computer, but you do need to connect it to a telephone line

to send and receive faxes.

You can connect the printer to other equipment. See the following table to determine the best way to

set up the printer.

Connecting directly to a telephone wall jack

CAUTION: Use only a 26 AWG or larger telecommunications (RJ-11) cord when connecting

this product to the public switched telephone network.

Connect the MFP directly to a telephone wall jack to make copies or send and receive faxes without

using a computer.

1 Make sure you have a telephone cord and a telephone wall jack.

2 Connect one end of the telephone cord into the LINE port of the MFP.

Getting the MFP ready to fax

3 Connect the other en of the telephone cord into an active telephone wall jack.

Note: For more information on connecting the MFP to telecommunications equipment,

see the additional setup instructions that came with the MFP. Setup steps may vary

depending on your country or region.

Connecting to a telephone

Connect a telephone to the MFP to use the fax line as a normal telephone line. Then set up the

printer wherever your telephone is located to make copies or send and receive faxes without using a

computer.

1 Make sure you have the following:

• A telephone

• Two telephone cords

• A telephone wall jack

2 Connect one telephone cord to the LINE port of the MFP, and then plug it into an active

telephone wall jack.

Getting the MFP ready to copy

3 Remove the protective plug from the EXT port of the MFP.

4 Connect the other telephone cord to a telephone, and then plug it into the EXT port of the

MFP.

Note: For more information on connecting the MFP to telecommunications equipment,

see the additional setup instructions that came with the MFP. Setup steps may vary

depending on your country or region.

Getting the MFP ready to copy

The X340/X340n/X342n can be used as a stand-alone copier and does not require additional setup

or connection to a computer or a network.

Learning about the MFP

Understanding the parts of the MFP

Use the To

1 ADF paper support Extend to support longer media.

2 Paper guides Make sure paper feeds correctly.

3 Automatic Document

Feeder (ADF)

Copy, scan, or fax multiple–page documents.

4 Top cover Access the scanner glass.

5 Control panel Operate the MFP. For more information, see Using the control

panel buttons on page 20.

6 Output paper support Hold longer paper in the front output tray.

Understanding the parts of the MFP

7 Front output tray Hold paper as it exits the MFP.

8 Front cover Access the toner cartridge.

9 Paper tray Load paper automatically.

10 Manual feeder Load paper manually.

11 Paper level indicator Verify the level of paper in the paper tray.

12 Access button Release the front cover.

13 Scanner glass Scan, copy, or fax a single–page document.

14 Scanner lock Lock the scanner unit during transport.

Use the To

Understanding the parts of the MFP

Use the To

15 Rear hinges Lift the top cover to fit thicker documents, such as books.

16 Power switch Turn the MFP on or off.

17 Power supply port Connect the MFP to a power source.

18 Dust cover Protect longer sizes of paper that may extend beyond the edge of

the MFP.

19 Rear cover Remove heavier paper from the printer as it exits.

20 Ethernet port Connect the MFP to a network using an ethernet cable.

Note: This port is only available on the X342n. The ethernet port

and the USB port cannot be used at the same time.

21 USB port Connect the MFP to a computer using a USB cable.

22 LINE port Connect the MFP to an active telephone line to send and receive

faxes.

23 EXT port Connect the MFP to a telephone or answering machine.

24 Handles Lift the MFP.

Using the control panel buttons

The display shows:

• MFP status

• Messages

• Menus

Press To

1 Copy Access the Copy mode to make copies.

Note: The mode is selected when the button light is on.

2 Fax Access the Fax mode to fax.

Note: The mode is selected when the button light is on.

3 Scan Access the Scan mode to scan.

Note: The mode is selected when the button light is on.

4 Scale Control the size of a copied document as compared to its original size.

5 Collate Control the sequence in which multiple-page jobs are completed.

6 Options (Copy) • Adjust the paper source.

• Adjust the paper saver settings.

7 Speed Dial buttons Access any of the first five programmed shortcuts.

8 Shift Access shortcuts 6–10.

Note: Press Shift, and then press the first speed dial button to dial shortcut

6. Press Shift, and then press the second speed dial button to dial shortcut

7, and so on.

9 Options (Fax) • Access the Broadcast function.

• Delay sending a fax.

• Cancel a fax.

10 (On/Off Hook) Manually send or receive a fax.

123 4 7

9101112

Page is loading ...

Lexmark 20D0000 - X 340 MFP B/W Laser User manual

Brand: Lexmark

Model: 20D0000 - X 340 MFP B/W Laser

Category: Laser/LED printers

Type: User manual

Download PDF

report

Lexmark 20D0000 - X 340 MFP B/W Laser User manual

Lexmark 20D0000 - X 340 MFP B/W Laser User manual

Related papers

Other documents