Chief Manufacturing CMA351 User manual

Chief Manufacturing
Brand
Chief Manufacturing
Model
CMA351
Category
Wall & ceiling mounts accessories
Type
User manual

Chief Manufacturing CMA351 is a heavy-duty swivel adapter designed for mounting projectors, displays, and other equipment. It is made of durable aluminum and can support up to 500 lbs of weight. The CMA351 features a 360-degree swivel range, allowing you to position your equipment at any angle. It also has two stop positions that can be set to limit the range of swivel motion. The CMA351 is easy to install and comes with all the necessary hardware. It is a versatile mounting solution that can be used in a variety of applications.

Chief Manufacturing CMA351 is a heavy-duty swivel adapter designed for mounting projectors, displays, and other equipment. It is made of durable aluminum and can support up to 500 lbs of weight. The CMA351 features a 360-degree swivel range, allowing you to position your equipment at any angle. It also has two stop positions that can be set to limit the range of swivel motion. The CMA351 is easy to install and comes with all the necessary hardware. It is a versatile mounting solution that can be used in a variety of applications.

INSTALLATION INSTRUCTIONS
Instrucciones de instalación
Installationsanleitung
Instruções de Instalação
Istruzioni di installazione
Installatie-instructies
Instructions d´installation
Heavy Duty Swivel Adapter
Spanish Product Description
German Product Description
Portuguese Product Description
Italian Product Description
Dutch Product Description
French Product Description
CMA351
CMA351 Installation Instructions
2
DISCLAIMER
Milestone AV Technologies and its affiliated corporations and
subsidiaries (collectively "Milestone"), intend to make this
manual accurate and complete. However, Milestone makes no
claim that the information contained herein covers all details,
conditions or variations, nor does it provide for every possible
contingency in connection with the installation or use of this
product. The information contained in this document is subject
to change without notice or obligation of any kind. Milestone
makes no representation of warranty, expressed or implied,
regarding the information contained herein. Milestone assumes
no responsibility for accuracy, completeness or sufficiency of
the information contained in this document.
Chief® is a registered trademark of Milestone AV Technologies.
All rights reserved.
IMPORTANT SAFETY INSTRUCTIONS
WARNING: A WARNING alerts you to the possibility of
serious injury or death if you do not follow the instructions.
CAUTION: A CAUTION alerts you to the possibility of
damage or destruction of equipment if you do not follow the
corresponding instructions.
WARNING: Failure to read, thoroughly understand, and
follow all instructions can result in serious personal injury,
damage to equipment, or voiding of factory warranty! It is the
installer’s responsibility to make sure all components are
properly assembled and installed using the instructions
provided.
WARNING: Failure to provide adequate structural strength
for this component can result in serious personal injury or
damage to equipment! It is the installer’s responsibility to
make sure the structure to which this component is attached
can support five times the combined weight of all equipment.
Reinforce the structure as required before installing the
component.
WARNING: Exceeding the weight capacity can result in
serious personal injury or damage to equipment! It is the
installer’s responsibility to make sure the combined weight of
all components located between the CMA351 up to (and
including) the projector does not exceed 500 lbs (226.8 kg).
• The weight capacity of the CMA351 may be
LIMITED to the lowest weight capacity of any
other component located between the CMA351
and the supporting structure!
WARNING: Use this mounting system only for its intended
use as described in these instructions. Do not use
attachments not recommended by the manufacturer.
WARNING: The CMA351 mounts are designed to be
mounted to a 1-1/2" NPT or NPSM following ANSI/ASME
B1.20.1 (Schedule 40, 0.154" minimum thickness aluminum-
ASTM B221) threaded extension column.
WARNING: Never operate this mounting system if it is
damaged. Return the mounting system to a service center for
examination and repair.
WARNING: Do not use this product outdoors.
--SAVE THESE INSTRUCTIONS--
Installation Instructions CMA351
3
DIMENSIONS
3.01
76.424
2.00
50.800
4.00
101.600
2.00
50.800
4.00
101.600
1 1/2" NPS
BOTH ENDS
STOP SET SCREW
CMA351 Installation Instructions
4
LEGEND
Tighten Fastener
Apretar elemento de fijación
Befestigungsteil festziehen
Apertar fixador
Serrare il fissaggio
Bevestiging vastdraaien
Serrez les fixations
Loosen Fastener
Aflojar elemento de fijación
Befestigungsteil lösen
Desapertar fixador
Allentare il fissaggio
Bevestiging losdraaien
Desserrez les fixations
Phillips Screwdriver
Destornillador Phillips
Kreuzschlitzschraubendreher
Chave de fendas Phillips
Cacciavite a stella
Kruiskopschroevendraaier
Tournevis à pointe cruciforme
Open-Ended Wrench
Llave de boca
Gabelschlüssel
Chave de bocas
Chiave a punte aperte
Steeksleutel
Clé à fourche
By Hand
A mano
Von Hand
Com a mão
A mano
Met de hand
À la main
Hex-Head Wrench
Llave de cabeza hexagonal
Sechskantschlüssel
Chave de cabeça sextavada
Chiave esagonale
Zeskantsleutel
Clé à tête hexagonale
Pencil Mark
Marcar con lápiz
Stiftmarkierung
Marcar com lápis
Segno a matita
Potloodmerkteken
Marquage au crayon
Drill Hole
Perforar
Bohrloch
Fazer furo
Praticare un foro
Gat boren
Percez un trou
Adjust
Ajustar
Einstellen
Ajustar
Regolare
Afstellen
Ajuster
Remove
Quitar
Entfernen
Remover
Rimuovere
Verwijderen
Retirez
Optional
Opcional
Optional
Opcional
Opzionale
Optie
En option
Security Wrench
Llave de seguridad
Sicherheitsschlüssel
Chave de segurança
Chiave di sicurezza
Veiligheidssleutel
Clé de sécurité
Installation Instructions CMA351
5
TOOLS REQUIRED FOR INSTALLATION
PARTS
5/32"
3/32"
(provided)
(provided)
5/32"
A (1)
E (1)
#8-32 x 1/2"
3/32"
H (1)
B (1)
J (1)
C (2)
.315 x .507 x 090
G (1)
10-24 x 1/4"
F (1)
5/16-18 x 3/8"
D (2)
10-24
[swivel adapter]
[stop plate]
CMA351 Installation Instructions
6
Installation
IMPORTANT ! : These installation instructions assume
that a 1-1/2" NPT or NPSM following ANSI/ASME B1.20.1
(Schedule 40, 0.154" minimum thickness aluminum-ASTM
B221) threaded extension column (not included) has been
properly installed and is in place.
1. Place one Nylon washer (C) over each stud on swivel
adapter (A). (See Figure 1)
2. Align slots in stop plate (B) with two threaded studs on
swivel adapter (A). (See Figure 1)
3. Secure stop plate (B) to swivel adapter (A) using two lock
nuts (D). (See Figure 1)
NOTE: DO NOT fully tighten lock nuts at this time.
Figure 1
4. Thread swivel adapter (A) onto existing 1-1/2" NPT or
NPSM threaded extension column until tight, with a
minimum of four threads engaged. (See Figure 2)
5. Secure swivel adapter (A) to extension column using 5/16-
18 x 3/8" set screw (F) and hex wrench. (See Figure 2)
Figure 2
6. Rotate the bottom of swivel adapter (A) until middle set
screw in swivel adapter (A) makes contact with tab in stop
plate (B). (See Figure 3)
NOTE: This is considered the first stop position.
Figure 3
1
2
3
(C) x 2
(D) x 2
(A)
(A)
(B)
4
5
(F)
(A)
6
TOP VIEW
Tab
Lower Set
Screw
Lower Set
Screw
Tab
(Not Visible)
(B)
(A)
Installation Instructions CMA351
7
7. Using a pipe wrench, install 1-1/2" NPT or NPSM following
ANSI/ASME B1.20.1 (Schedule 40, 0.154" minimum
thickness aluminum - ASTM B221) threaded extension
column (not included) into swivel adapter (A) until tight, with
a minimum of four threads engaged.
8. Secure lower 1 1/2" NPT pipe to swivel adapter (A) using
#10-24 x 1/4" set screw (G). (See Figure 4)
WARNING: Exceeding the weight capacity can result in
serious personal injury or damage to equipment! It is the
installer’s responsibility to make sure the combined weight of
all components located between the CMA351 up to (and
including) the display/projector does not exceed 500 lbs
(226.8 kg).
The weight capacity of the CMA351 may be LIMITED to
the lowest weight capacity of any other component located
between the CMA351 and the supporting structure!
Figure 4
9. Rotate the bottom portion of the CMA-351 to the desired
location for the second stop (0 degrees to 330 degrees).
(See Figure 5)
10. Insert one Phillips pan head screw (E) in the nearest
threaded hole in stop plate (B). (See Figure 5)
Figure 5
11. Tighten two lock nuts (D). (See Figure 6)
Figure 6
7
(G)
(A)
8
(B)
Second Stop Location
(E)
(D) x 2
CMA351 Installation Instructions
USA/International A 6436 City West Parkway, Eden Prairie, MN 55344
P 800.582.6480 / 952.225.6000
F 877.894.6918 / 952.894.6918
Europe A Franklinstraat 14, 6003 DK Weert, Netherlands
P +31 (0) 495 580 852
F +31 (0) 495 580 845
Asia Pacific A Office No. 1 on 12/F, Shatin Galleria
18-24 Shan Mei Street
Fotan, Shatin, Hong Kong
P 852 2145 4099
F 852 2145 4477
Chief Manufacturing, a products division
of Milestone AV Technologies
8800-002183 Rev00
2012 Milestone AV Technologies, a
Duchossois Group Company
www.chiefmfg.com
04/12
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Chief Manufacturing CMA351 User manual

Chief Manufacturing
Brand
Chief Manufacturing
Model
CMA351
Category
Wall & ceiling mounts accessories
Type
User manual

Chief Manufacturing CMA351 is a heavy-duty swivel adapter designed for mounting projectors, displays, and other equipment. It is made of durable aluminum and can support up to 500 lbs of weight. The CMA351 features a 360-degree swivel range, allowing you to position your equipment at any angle. It also has two stop positions that can be set to limit the range of swivel motion. The CMA351 is easy to install and comes with all the necessary hardware. It is a versatile mounting solution that can be used in a variety of applications.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents