Radial Engineering JX-42 is a guitar and amp switcher designed to provide easy switching between instruments and amplifiers. It features four inputs for guitars or basses, and two outputs for amps. The JX-42 also has a dedicated tuner output for quick and easy tuning.
The JX-42's innovative DRAG and TRIM controls allow you to adjust the load on passive instruments, which can help to replicate the tone and feel of a tube amp. The DRAG control can also be used to trim the level of active instruments, ensuring that all of your instruments are at the same level.
Radial Engineering JX-42 is a guitar and amp switcher designed to provide easy switching between instruments and amplifiers. It features four inputs for guitars or basses, and two outputs for amps. The JX-42 also has a dedicated tuner output for quick and easy tuning.
The JX-42's innovative DRAG and TRIM controls allow you to adjust the load on passive instruments, which can help to replicate the tone and feel of a tube amp. The DRAG control can also be used to trim the level of active instruments, ensuring that all of your instruments are at the same level.
Radial Engineering JX-42 is a guitar and amp switcher designed to provide easy switching between instruments and amplifiers. It features four inputs for guitars or basses, and two outputs for amps. The JX-42 also has a dedicated tuner output for quick and easy tuning.
The JX-42's innovative DRAG and TRIM controls allow you to adjust the load on passive instruments, which can help to replicate the tone and feel of a tube amp. The DRAG control can also be used to trim the level of active instruments, ensuring that all of your instruments are at the same level.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI