GIANNI INDUSTRIES, INC.
Copyright 2008 Gianni industries, inc. All rights reserved.
DM-CA-KS Ver. E Published on 2008.07.09
The products are manufactured under an ISO
9001 QC 080000 Certified Quality
Management Program environment back its
product quality, performance and commitment
to customer satisfaction.
&
Statement
General Purpose Key Switch
1
2
3
4
5
6
7
8
9
0
*
#
Reader
(outdoor)
Key switch
(outdoor)
Lock Device
(fail-safe)
Power to Lock
Relay output
Com.
N.C.
Com.
N.C.
Uninterruptible
Power Supply
1
2
3
4
5
6
7
8
9
0
*
#
Reader
(outdoor)
Key switch
(outdoor)
Lock Device
(fail-secure)
Power to unlock
Relay output
Com.
N.O.
Com.
N.O.
Uninterruptible
Power Supply
Install Key Switch in the outside (as the figure) and parallel (or
series) connect with the power supply and electromagnetic
lock. If the electromagnetic lock is not be opened for the
reasons of that the proximity reader is out of order or that
unexpected accident happens, please switch N. C. or N. O.
contacts by the key to compel the fail-safe(Power to Lock) or
fail-secure(Power to open) electromagnetic lock opened. This
is a precaution of the access control system.
The connection for fail-safe Lock devices：
The connection for fail-secure Lock devices：
Ex: The electromagnetic locks. Please connect the Com. and
N. C. of the key switch in terms of series connection with the
cable of the power supply and electromagnetic lock. If the
electromagnetic lock won't be opened for the reasons of that
the proximity reader is out of order or that unexpected
accident happens, please switch N. O. contact by the key to
compel the power off and then the electromagnetic lock will be
opened.
Please parallel connect the Com. and N. O. of the key switch in
terms of parallel connection with the cable of the power supply
and electromagnetic lock. If the electromagnetic lock won't be
opened for the reasons of that the proximity reader is out of
order or that unexpected accident happens, please switch N.
C. contact by the key to compel the power on and then the
electromagnetic lock will be opened.
Com.
Com.
N. O.
N. O.
N. C.
N. C.
N. C.
N. C.
N. C.
N. C.
N. O.
N. O.
N. O.
N. O.
Com.
Com.
Com.
Com.
Momentary SPDT
Maintained SPDT
Vandal resistant screw
Faceplate
Bracket
Momentary or
Maintained SPDT
(Cylinder Exclude)
No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,
Tu-Cheng City, Taipei, Taiwan 23678
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
E-Mail: [email protected]
Website: gianni.tw
GIANNI INDUSTRIES, INC.
The products are manufactured under an ISO
9001 QC 080000 Certified Quality
Management Program environment back its
product quality, performance and commitment
to customer satisfaction.
&
General Purpose Key Switch
British Sized ANSI Sized
KS-600
KS-500
PBT-7510A
Flush mount only
Stainless faceplate
Momentary DPDT switch
Switch ratings 5A@125V~
Flush mount or with SMB-050 box for surface
Momentary SPDT switch
Switch ratings 15A@120~250VAC
Faceplate
Bracket
(Cylinder Exclude)
Com.
N.C.
N. O.
KS-700W
KS-700WS
Momentary (or Maintained) SPDT
Switch ratings 5A@125VAC.
Flush mount or with SMB-050 box for surface (KS-700WS)
ANSI Box
Optional Housing
SMB-050 SMB-750
With SMB-050orSMB-750housing(Optional)for surface mount
installation.
Max. Ratings : 4A@125 Vac,
2A@250Vac or 4A@28Vdc
Type of actuation: Momentary
Contact arrangement: SPDT
Contact resistance:
50 mΩ Max.(initial)
Unit: mm
British standard
electrical box (excluded)
85.5
2.0
85.5
60.0
This series of request to exit can be mounted directly in British
standard electrical box (Flush mount) or with SMB-86ALU
housing for surface mount.
SMB-86ALU
Copyright 2008 Gianni industries, inc. All rights reserved.
DM-CA-KS Ver. E Published on 2008.07.09
No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,
Tu-Cheng City, Taipei, Taiwan 23678
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
E-Mail: [email protected]
Website: gianni.tw
The product is warranted against defects in material and
workmanship while used in normal service for a period of 1
year from the date of sale to the original customer. The GEM
policy is one of continual development and improvement;
therefore GEM reserves the right to change specifications
without notice.
Warranty
GIANNI INDUSTRIES, INC.
The products are manufactured under an ISO
9001 QC 080000 Certified Quality
Management Program environment back its
product quality, performance and commitment
to customer satisfaction.
&
General Purpose Key Switch
ANSI Sized Special Sized
KS-750 KS-750LD
KS-750 series
KS-750LD
Mortise type key switch, back housing is available by
preference (ANSI). Maintained SPDT micro switching contacts
with Red and Green LED indicating the status of the micro
switching contacts ( ).
Green GreenRed Red
Momentary (or Maintained) SPDT
Flush mount or with SMB-050 box for surface
LED indicating the status of the micro switching contacts
Switch ratings 5A@125VAC.
SMB-050 SMB-750
With SMB-050 or SMB-750 housing (Optional)for surface mount
installation.
KS-750 with SMB-050 box for
surface mount. (KS-750S)
KS-750S
Flush mount
Maintained SPDT micro switch
Switch ratings 5A@125VAC.
LED indicating the status of the micro switching contacts
KS-900 KS-900LD
SMB-370ALU
Metal back box for KS-900 surface mount
Unit: mm
110
19
37
0.9
36 1.
90
37
Copyright 2008 Gianni industries, inc. All rights reserved.
DM-CA-KS Ver. E Published on 2008.07.09
No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,
Tu-Cheng City, Taipei, Taiwan 23678
Tel: 886-2 2267 7986 / Fax: 886-2 2267 9876
E-Mail: [email protected]
Website: gianni.tw
-
1
-
2
-
3
Gianni Industries GEM KS-750 User manual
- Type
- User manual
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Gianni Industries KS-750 Installation guide
-
-
-
-
-
-
-
Gianni Industries BTS-486BTS-300 User manual
-
-
Gianni Industries KS-800 Installation guide