Senco SLS18 User manual

Category
Staple guns
Type
User manual
Fastening Solutions
SLS18
ProSeries 18 Gauge Stapler
L
1
/2
5
/8
3
/4
7
/8
1 1
1
/4*
1
/4"
1
1
/8
1
1
/2*
The versatile SLS18 finish stapler weighs just 2.9 lbs,
but can drive 1/2" to 1-1/2" staples into hard woods.
With either a dual or restrictive trigger, you can choose
between high productivity or precision
placement, making it the ideal stapler for a wide range
of applications
Applications:
Cabinets, soffit, fascia, drawer assembly, picture
frames, case backs, craft assembly
SLS18 Features and Benefits:
Extra power to drive fasteners up to 1-1/2" into
hard wood applications
Adjustable depth-of-drive
Rear exhaust – keeps oil and dust away from the
work surface
Easy-open latch – for quick loading
Hardened steel driver – for extended life
Full soft grip – for comfort and control
Low load indicator – visible fastener indicator
No-mar pad – to protect work materials
One-year warranty
Available dual action or restrictive fire
Includes case, fitting, oil, hex wrench and fastener
rebate
www.senco.com ©2005 by Senco Products, Inc.
Fastener Specifications:
Gauge: 18
Crown: 1/4" (6.35 mm)
Fastener Range: 1/2" – 1-1/2"
Finish: Galvanized
Specifications:
SLS18 w/case Item#: 1W0002N contact,
1W0001N sequential
Tool Weight: 2.9 lbs (1.3 kg)
Height: 9" (228.6 mm)
Length: 10" (254 mm)
Staple Capacity: 110
Reg. Operating Pressure: 70-120 psig
Mode of Operation: Available with either contact or
sequential trigger activating mechanisms
Lip length: 3/4" (19 mm)
Fastening Solutions
Bottom-Load Magazine
For added convenience
Smooth metal cap
Comfort Grip
www.senco.com ©2006 by Senco Products, Inc.
Heavy-duty body.
No-Mar Pad
Protects woodwork
Rear Exhaust
Keeps oil and dust
away from work surface
Low Load Indicator
Easy to check fasteners
Easy-Open Latch
For more comfortable
loading
Rear Bumper
Protects work surface
Adjustable Depth-of-Drive
Drives staples to a consistent
and controllable depth
SLS18
ProSeries
®
18 Gauge Stapler
Always read the Operators Manual and Safety Instructions with all tools to ensure
proper use and safety precautions or contact SENCO for more information on our
trigger systems. Choose the right trigger system for your specific needs!
For additional information on how SENCO Fastening Solutions will save you time,
reduce costs, and increase quality, call our toll-free Action Line: 1-800-543-4596 to
find your nearest Authorized Senco Dealer or Distributor.
Visit our web site at: www.senco.com
Sequential Actuation Trigger (also known as restrictive trigger or
trigger fire) operates in the following a sequence - depress the safety
element at the nose of tool against the work surface then pull the trigger.
After each fastener is driven, release the trigger and lift the tool off the
work surface before starting the sequence again. This trigger is
recommended and acceptable for most applications.
Contact Actuation Trigger (also known as dual action, bounce or
bottom fire) operates in the following sequence- pull the trigger first and
keep the trigger pulled while moving the tool along the work surface
with a bouncing motion, depressing the safety element at the nose of
the tool against the work surface where the fastener is to be driven. This
trigger is recommended for use by trained professionals only in high
production or volume applications.
  • Page 1 1
  • Page 2 2

Senco SLS18 User manual

Category
Staple guns
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI