2. Computers & electronics
  3. Computer components
  4. Chassis components
  5. Racks
  6. Rack accessories
  7. Spectrum Industries
  8. 97515B

Spectrum Industries 97515B Assembly Instructions

  • Hello! I'm a chat assistant and I've reviewed the assembly instructions for the Spectrum Rack-Mount Drawer models #97515 and #97514. This document provides step-by-step instructions on how to mount these drawers to a rack rail, also including information on required tools and rack unit measurements. I'm here to help answer any questions you might have about the installation process or features of these drawers.
  • What size rack space does the #97515 drawer require?
    What size rack space does the #97514 drawer require?
    How many screws are needed to mount a drawer?
Rack-Mount Drawers
#97515 (8RU) File Drawer
#97514 (2RU) Drawer
Assembly Instructions:
Tools Required:
Phillips screwdriver
Before you begin, please make sure all parts and proper quantities are
included. Any parts damaged during shipment must be reported within
15 days of receipt. To report information regarding damages or if you
have any questions, please call 1-800-235-1262.
(4) 050184
10-32 x 5/8" PHMS
1. Attaching Drawers to Rack Rail
A. For your application, determine the most convenient mounting location for the drawer on the rack rail. #97515 requires 8RU,
and #97514 requires 2RU. Be sure the drawer will not interfere with wires or other components.
B. Make sure all 4 mounting holes line up with rack rail holes. Using a Phillips screwdriver and (4) 10-32 x 5/8" PHM screws,
attach the drawer to the rack rail and tighten securely. Figure 1. (Be sure the drawer is supported while installing the screws.)
To purchase parts or accessories, please contact us at
www.spectrumfurniture.com
1-800-235-1262
Thank you for choosing Spectrum products!
0105826XR2 Page 1 of 1
Rack-Mount Drawers
#97515 (8RU) File Drawer
#97514 (2RU) Drawer
Assembly Instructions:
Tools Required:
Phillips screwdriver
Before you begin, please make sure all parts and proper quantities are
included. Any parts damaged during shipment must be reported within
15 days of receipt. To report information regarding damages or if you
have any questions, please call 1-800-235-1262.
(4) 050184
10-32 x 5/8" PHMS
1. Attaching Drawers to Rack Rail
A. For your application, determine the most convenient mounting location for the drawer on the rack rail. #97515 requires 8RU,
and #97514 requires 2RU. Be sure the drawer will not interfere with wires or other components.
B. Make sure all 4 mounting holes line up with rack rail holes. Using a Phillips screwdriver and (4) 10-32 x 5/8" PHM screws,
attach the drawer to the rack rail and tighten securely. Figure 1. (Be sure the drawer is supported while installing the screws.)
Figure 1
10-32 x 5/8" PHM screws
(4 req'd per drawer)
To purchase parts or accessories, please contact us at
www.spectrumfurniture.com
1-800-235-1262
Thank you for choosing Spectrum products!
Rack Rail
File Drawer
#97515 (8RU)
Drawer
#97514 (2RU)
/