2. Spectrum Industries
  3. 0101657GTD

Spectrum Industries 0101657GTD Assembly Instructions

  • I have reviewed the provided assembly instructions document for the Spectrum Industries shelves 0101657 and 0101658 designed for the Evolution Stand-Up Desk. The document includes details on how to attach the shelf using the provided screws in two possible mounting positions. I'm ready to answer any questions you may have about these instructions.
  • What tool is required to assemble the shelf?
    How many screws are needed to attach the shelf?
    What should be done if parts are damaged during the shipment?
Shelf for Evolution Stand-Up Desk
36" - 0101657
44" - 0101658
Assembly Instructions:
0101873X Pa
g
e 1 of 1
Before you begin, please make sure all parts and proper quantities are included. Any parts damaged during shipment must be
reported within 15 days of receipt. To report information regarding damages or if you have any questions, please call
1-800-235-1262.
A. Flip the desk over onto a non-abrasive surface.
B. Position the shelf into the preferred location between the desk
legs as shown in Figure 1. (Note: Upper and lower shelf mounting
holes are available.)
C. Align the holes on the shelf with the leg holes and secure with
(4) 1/4-20 x 5/8" PHM Screws.
A
ttach Shelf to Desk
1.
Tools Required:
Phillips head screwdriver
Figure 1
(4) 026064
1/4-20 x 5/8" PHMS
1/4-20 x 5/8" PHM Scre
w
Lower Position
Upper Position
Shel
f
(1) Shelf
36" - 0101657
44" - 0101658
/