2. Kmart
  3. 43267194

Kmart 43267194 User manual

  • Hello! I've reviewed the assembly instructions for the Kmart Side Table 43267194. This document provides detailed steps to guide you through the assembly process, along with important safety warnings. The side table has a ribbed design and is designed for indoor use with a maximum safe load of 10kg for its top.
  • What is the maximum safe load for the table top?
    Is there any special instruction for tightening the screws during assembly?
    Is this table intended for indoor or outdoor use?
43267194 CHUNKY RIBBED SIDE TABLE
Assembly Instruction
MAXIMUM SAFE LOAD:10KG FOR TABLE TOP.
4x35mm
4x25mm
6x20mm
A8pcs
2pcs
12pcs
2pcs
20pcs
B
C
D
6x30mmE
3
4
5
2
1
FAILURE TO FOLLOW THESE WARNINGS COULD RESULT IN SERIOUS INJURY.
ADULT ASSEMBLY REQUIRED.
1 PC 1 PC 1 PC 4 PCS 1 PC
B
B
2
C
CC
C
C
CC
C
2
3
ATTENTION: PLEASE LOCK C SCREW AT 80% AND DO NOT FULLY TIGHTEN.
C
80%
8
C
4 x 35 mm
3
54
4
4
4
C
C
C
C
CC
C
C
ATTENTION: LOCK PART 4 WITH C SCREW AND KEEP ALL SIDE
SCREW HOLES. POSITION MARK ARE ALIGNED.
POSITION MARK
POSITION MARK
ATTENTION: CHECK THE POSITION MARK ON THE BOARD.
THEN ALIGN MARK AND ALL SCREW HOLES ON 3&5.
3
3
5
POSITION MARK
POSITION MARK
POSITION MARK
5
C
B x 2
6 x 30 mm
12
C
4 x 35 mm
!
A
D D
D x 12
E
E
C
100%
100%
A
80%
A
A
A
A
A
A
A
A
D
ATTENTION: PLEASE TIGHTEN ALL SCREWS AT 100%. ATTENTION: PLEASE LOCK A SCREW AT 80% BEFORE ALL THE HOLES
ALIGNED, THEN TIGHTEN ALL SCREWS AT 100%.
5
1
E x 2
6 x 20 mm
A x 8
4 x 25 mm
/