Verkada Sentry Mode User guide

Type
User guide

This manual is also suitable for

User Guide for
Sentry Mode
[email protected]www.verkada.com 1023
User Guide for Sentry Mode
www.verkada.com 1023 sales@verkada.com 2
Sentry Mode is a new feature available for all CP52-E Pan-Tilt-Zoom (PTZ) cameras. With Sentry Mode, the
PTZ becomes your vigilant eye, providing the benets of live monitoring when an operator is not available.
When Sentry Mode is activated, the PTZ camera automatically detects people that enter its eld of view. Once a
person is detected, the camera zooms in to capture high resolution footage of the individual and follows them for
approximately 15 seconds before zooming out to regain full context of the scene. Sentry Mode can be enabled
24/7 or follow a set schedule.
Sentry Mode is part of our People Analytics suite of computer vision technology. Similar to other People Analytics
features, the accuracy of Sentry Mode is highly dependent on the proper installation of the camera, people density
in the scene, and the visibility and distance of the individuals that enter the camera’s eld of view.
This user guide provides an overview of:
Key use cases
Setup and user experience
Factors aecting accuracy
Expected behaviors for Sentry Mode
How to install the PTZ to maximize accuracy
Sentry Mode allows organizations to eectively monitor vast indoor and outdoor spaces when a live operator
is not available. By autopiloting the PTZ, Sentry Mode helps to ensure that detailed attributes of people found
within the area of detection are captured clearly. Equipped with close-up images of clothing and faces,
organizations can then better conduct investigations and leverage People Analytics features like attribute
and face search across their entire camera fleet.
Sentry Mode works best in areas with low people density and a clear and unobstructed view. For areas with
high people density, we recommend scheduling Sentry Mode to activate during periods of decreased foot
trac such as after hours.
Overview
Use cases
Storage lots, warehouses and
manufacturing facilities after hours
Safeguard valuable assets, such as
inventory and equipment, during hours
when people should not be present.
Detect unauthorized access, track the
movement of individuals, and zoom in
to gather identifying details when a live
operator is not available.
Parking lots, campuses and parks
with low foot trac
Eectively monitor outdoor spaces with
low foot trac or at night for suspicious
activities. Capture high-quality images
of individuals conducting illegal behavior
like catalytic converter theft in auto
dealerships, parking lots and school
campuses.
Stadiums and venues when
not in use
Continue monitoring stadiums
and venues even outside of event
hours. Automatically scan the space
for suspicious activities such as
unauthorized access, loitering and
vandalism during idle periods.
User Guide for Sentry Mode
www.verkada.com 1023 sales@verkada.com 3
Site admin permissions are required to set up Sentry Mode on a PTZ camera. Upon navigating to a PTZ camera
in Command, users can nd the Sentry Mode icon in the toolbar to the right of the video feed.
When enabling Sentry Mode for the rst time, users need to select a eld of view for the camera to monitor.
The list of options correspond to the preset views on that PTZ camera. For the best results, we recommend a
wide eld of view that captures the entire scene.
Setup and user experience
User Guide for Sentry Mode
www.verkada.com 1023 sales@verkada.com 4
After selecting a preset location, users may also dene an active region for Sentry Mode by drawing a
polygon in the eld of view. Once activated, Sentry Mode will only zoom in on people detected inside
that region of the scene.
Users can also congure a schedule for Sentry Mode. This is useful for monitoring areas during specic
times such as nights and weekends. If the scheduling feature is disabled, Sentry Mode will be on 24/7
once activated.
To activate Sentry Mode, simply click Save and Activate.” The PTZ will start to automatically capture
high-resolution imagery of people within the area of detection during the scheduled times.
Users will be able to view high-quality, close-up images of people captured during Sentry Mode
under the People” and Faces tabs.
4
User Guide for Sentry Mode
www.verkada.com 1023 sales@verkada.com 5
Installation guidance
Expected behaviors
Install the camera at a high vantage
point
For optimal results, the PTZ camera
should be installed at least 25 feet
(8 meters) above the ground. The higher
vantage point allows the camera to have
as wide of a view as possible and fully
utilize the 28x optical zoom.
Position the camera within 150 feet of
potential subjects
The people detection algorithm is most
accurate when individuals are no more
than 150 feet (50 meters) away from the
camera. While the camera may capture
individuals at greater distances, Sentry
Mode’s accuracy will decrease.
Minimize obstructions
When setting up Sentry Mode, it is
important to choose an unobstructed
eld of view in an area that minimizes
interference from objects such as trees
or fencing. Obstructions may cause the
camera to lose track of detected people
in the scene.
Camera boot-up. Upon initial boot-up of the CP52-E PTZ, Sentry Mode may take a couple minutes before
detecting people.
Obstructions. When objects obstruct the PTZs line of sight to a detected person that is being followed, the
camera will zoom out slightly and pause temporarily to regain tracking of the subject. If the subject is not
detected within two seconds, the camera will revert back to Sentry Mode’s home position.
Large groups. When following a group of people, the PTZ will choose the optimal zoom level to keep every
person clearly visible inside the frame. If more than 10 people are detected within the camera’s eld of view,
the PTZ will remain in Sentry Mode’s home position to retain full context of the scene.
www.verkada.com 1023
Factors aecting accuracy
Sentry Mode relies on our people detection algorithm to accurately zoom in on people who enter the camera’s
eld of view. This algorithm can be aected by environmental factors, causing Sentry Mode to occasionally miss
individuals. There are four main variables that might inhibit Sentry Mode’s accuracy and general performance.
1. Obstructions. As a person moves through the camera’s eld of view, they may be temporarily or permanently
hidden from the PTZ’s line of sight by another object. This can cause issues for our tracking algorithms when
it comes to accurately following individuals throughout the entirety of the scene. For optimal results, we
recommend using Sentry Mode in areas with minimal obstructions.
2. Limited detection window. When conguring Sentry Mode, we recommend choosing a wide eld of view
that captures the entire scene you are looking to monitor. This is important as individuals need to be visible
for roughly 5 seconds for Sentry Mode to accurately follow their path. People who are running across a
narrow eld of view and/or appear for less than 5 seconds may be missed by the camera’s tracking algorithm.
3. High foot trac. In areas with high people density, such as airports, stadiums and concert venues, Sentry
Mode may miss individuals in the scene because the camera is already tracking another person or group
of people. Although we have implemented camera movement constraints in scenes with large crowds
(10+ people) as well as a zoom timeout mechanism, the camera may still miss certain people present on
the edge of the scene.
4. Distance to camera. Sentry Mode’s accuracy may decrease when individuals are more than 150 feet
(50 meters) away from the camera.
For ideal coverage when using Sentry Mode, we recommend pairing the PTZ with a xed camera
(e.g. Dome, Bullet or Fisheye) that monitors the entire scene. This helps to maintain general context
of the overall area when the CP52-E is zooming in on specic individuals.
User Guide for Sentry Mode
www.verkada.com 1023 sales@verkada.com 6
Examples of good installations
Unobstructed view of the entire scene
The street alongside the railroad tracks is unobstructed
and within the 150 feet (50 meter) range for accurate
people detection.
Complete eld of view
Using the widest eld of view possible, the CP52-E can
eectively monitor the parking lot and accurately zoom in on
people walking through the unobstructed sections of the area.
6
Examples of bad installations
Narrow eld of view
People must be present for at least 5 seconds before Sentry
Mode can accurately detect and zoom in on them. In this
example, the camera may not be able to follow people who
are walking across the frame.
High number of obstructions
Large objects like fences and trees may prevent Sentry Mode
from accurately following individuals who are temporarily or
permanently hidden from the camera’s line of sight.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

Verkada Sentry Mode User guide

Type
User guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI