Jabra 100-99090000-60 User manual

Brand: Jabra

Model: 100-99090000-60

Type: User manual

The Jabra 100-99090000-60 is a wireless headset designed for hands-free calling and listening to music. It features Bluetooth 5.0 connectivity for a stable connection to your smartphone or tablet. With a range of up to 30 feet, you can move around freely while staying connected. The headset has a built-in microphone with noise cancellation for clear calls, and it also supports voice assistant activation. The earbuds provide up to 7 hours of battery life on a single charge, and the included charging case extends the total playtime to up to 28 hours.

Jabra Elite 75t - Titanium Black

How do I pair my Jabra earbuds with my mobile device?

To pair with your smartphone, tablet, or mobile device, follow these steps.

1. Turn on the Bluetooth setting on your mobile device.

2. Turn on your earbuds by removing them from the charging case.

Alternatively, simultaneously press and hold (1 second) the Left and

Right buttons.

The LEDs on both earbuds will flash green.

3. To enter pairing mode, simultaneously press and hold (3 seconds) the

Left and Right buttons on the earbuds, until the LED on the right

earbud flashes blue.

The earbuds are now ready to pair with your mobile device.

4. To pair, go to the Bluetooth menu on your mobile device and select the

Jabra earbuds from the list. Alternatively, wear the earbuds to hear the

voice guided instructions.

Enter “0000” (four zeros) if you are asked for a pin code.

In daily use, when you turn on the earbuds, they will automatically

reconnect with the last previously paired device, if it is turned on and

within range.

To pair with your smartphone, tablet, or mobile device using only the

right earbud, follow these steps.

21/06/2022 09:54

https://www.jabra.com/supportpages/jabra-elite-75t/100-99090000-20/faq/e09ec7d7-

ae74-47a3-902f-a8270548f526

Page 1 of 3

1. Turn on the Bluetooth setting on your mobile device.

2. Turn off the right earbud manually by pressing and holding the Right

button until the LED flashes red.

3. To enter pairing mode, press and hold (3 seconds) the Right button

until the LED flashes blue.

The earbuds are now ready to pair with your mobile device.

4. To pair, go to the Bluetooth menu on your mobile device and select the

Jabra earbuds from the list. Alternatively, wear the earbud to hear the

voice guided instructions.

Enter “0000” (four zeros) if you are asked for a pin code.

If pairing is successful, your earbuds will appear in the list of connected

Bluetooth devices on your mobile device. The Bluetooth connection

will also be announced in the earbuds.

Note

Images are for guidance purposes only. The displayed image may differ

slightly from your device, however the content is still relevant and

accurate.

If pairing is not successful, try the pairing steps again, or try pairing with a

different Bluetooth device. For troubleshooting tips, see here.

Optionally, try using the Bluetooth Pairing Guide which provides detailed

steps for pairing with a mobile device.

21/06/2022 09:54

https://www.jabra.com/supportpages/jabra-elite-75t/100-99090000-20/faq/e09ec7d7-

ae74-47a3-902f-a8270548f526

Page 2 of 3

Applicable products

Jabra Elite 75t - Gold

Beige

Jabra Elite 75t -

Titanium Black

Jabra Elite 75t - Black

Jabra Elite Active 75t

- Copper Black

Jabra Elite Active 75t

- Grey

Jabra Elite Active 75t

- Mint

Jabra Elite Active 75t

- Navy

Jabra Elite Active 75t

- Sienna

Jabra Elite Active 75t

- Titanium Black

Jabra Elite 75t

Wireless Charging -

Titanium Black

Jabra Elite 75t

Wireless Charging -

Black

Jabra Elite Active 75t

Wireless Charging -

Navy

Jabra Elite Active 75t

Wireless Charging -

Grey

21/06/2022 09:54

https://www.jabra.com/supportpages/jabra-elite-75t/100-99090000-20/faq/e09ec7d7-

ae74-47a3-902f-a8270548f526

Page 3 of 3

Jabra 100-99090000-60 User manual

Jabra 100-99090000-60 User manual

Jabra 100-99090000-60 User manual

Related papers