Elite Active 75t

Jabra Elite Active 75t User manual

  • Hello! I've reviewed the user manual for Jabra Elite Active 75t and Elite 75t earbuds. This document provides instructions on how to pair your earbuds with your mobile device, using dual or singular earbud pairing. Includes various color models. I'm ready to assist you with any questions you might have about your device or the paring process and other information in the document.
  • How do I turn on my earbuds?
    How do I enter pairing mode?
    What do I do if I am asked for a pin code during pairing?
    How do I pair only using the right earbud?
Jabra Elite Active 75t - Sienna
How do I pair my Jabra earbuds with my mobile device?
To pair with your smartphone, tablet, or mobile device, follow these steps.
1. Turn on the Bluetooth setting on your mobile device.
2. Turn on your earbuds by removing them from the charging case.
Alternatively, simultaneously press and hold (1 second) the Left and
Right buttons.
The LEDs on both earbuds will flash green.
3. To enter pairing mode, simultaneously press and hold (3 seconds) the
Left and Right buttons on the earbuds, until the LED on the right
earbud flashes blue.
The earbuds are now ready to pair with your mobile device.
4. To pair, go to the Bluetooth menu on your mobile device and select the
Jabra earbuds from the list. Alternatively, wear the earbuds to hear the
voice guided instructions.
Enter 0000 (four zeros) if you are asked for a pin code.
In daily use, when you turn on the earbuds, they will automatically
reconnect with the last previously paired device, if it is turned on and
within range.
To pair with your smartphone, tablet, or mobile device using only the
right earbud, follow these steps.
13/10/2022 04:57
https://www.jabra.com/supportpages/jabra-elite-active-75t/100-99091003-
20/faq/e09ec7d7-ae74-47a3-902f-a8270548f526
Page 1 of 3
1. Turn on the Bluetooth setting on your mobile device.
2. Turn off the right earbud manually by pressing and holding the Right
button until the LED flashes red.
3. To enter pairing mode, press and hold (3 seconds) the Right button
until the LED flashes blue.
The earbuds are now ready to pair with your mobile device.
4. To pair, go to the Bluetooth menu on your mobile device and select the
Jabra earbuds from the list. Alternatively, wear the earbud to hear the
voice guided instructions.
Enter 0000 (four zeros) if you are asked for a pin code.
If pairing is successful, your earbuds will appear in the list of connected
Bluetooth devices on your mobile device. The Bluetooth connection
will also be announced in the earbuds.
Note
Images are for guidance purposes only. The displayed image may differ
slightly from your device, however the content is still relevant and
accurate.
If pairing is not successful, try the pairing steps again, or try pairing with a
different Bluetooth device. For troubleshooting tips, see here.
Optionally, try using the Bluetooth Pairing Guide which provides detailed
steps for pairing with a mobile device.
13/10/2022 04:57
https://www.jabra.com/supportpages/jabra-elite-active-75t/100-99091003-
20/faq/e09ec7d7-ae74-47a3-902f-a8270548f526
Page 2 of 3
Applicable products
Jabra Elite 75t - Gold
Beige
Jabra Elite 75t -
Titanium Black
Jabra Elite 75t - Black
Jabra Elite Active 75t
- Copper Black
Jabra Elite Active 75t
- Dark Grey
Jabra Elite Active 75t
- Mint
Jabra Elite Active 75t
- Navy
Jabra Elite Active 75t
- Sienna
Jabra Elite Active 75t
- Titanium Black
Jabra Elite 75t
Wireless Charging -
Titanium Black
Jabra Elite 75t
Wireless Charging -
Black
Jabra Elite Active 75t
Wireless Charging -
Navy
Jabra Elite Active 75t
Wireless Charging -
Grey
13/10/2022 04:57
https://www.jabra.com/supportpages/jabra-elite-active-75t/100-99091003-
20/faq/e09ec7d7-ae74-47a3-902f-a8270548f526
Page 3 of 3
1/3