2. DV8 OFFROAD
  3. SRSOTB-06

DV8 OFFROAD SRSOTB-06 Installation guide

  • Hello! I've reviewed the provided installation guide for the DV8 Offroad SR-6 side steps. This document contains a parts list and step-by-step instructions for installing the steps on your Jeep. I am ready to answer any questions you have about the installation process or the included components.
  • What should I do if the item is damaged?
    What is the first step after unboxing the item?
    What should I do with the factory Rubicon slider?
SR-6 Installation Guide
Contents:
1. Begin by unboxing and inspecting the item for signs of damage. If damage
has occurred please call us at 951-680-9595.
2. Remove the factory Rubicon slider if equipped
3. Locate the driver side slider/ step (The steps will only line up one way
4. Insert the metal studs through the factory holes in the pinch seam of the
Jeep and secure with the supplied washers and nuts
5. Now using the supplied hardware mount the 3 under body mounting points
(6)- M8x1.25 Bolts
(12)- M8x1.25 Nuts
(12) M8 Small Washers
(6)- M8 Large Washers
(18) M8 Lock Washers
(2) Steps (Left and Right)
6. Tighten all hardware and repeat steps on the opposite side of the Jeep.
/