JTM2020 - REV 1 11/1/21 Page 1
BED RACK TRAIL TOOL
MOUNT
JT
*VERIFY YOU HAVE ALL THE COMPONENTS BEFORE STARTING THE INSTALLATION. REFER TO THE
ENGINEERING DRAWINGS AT THE END OF THIS DOCUMENT FOR A COMPLETE PARTS LIST*
BLACK OPS SERIES
JTM2020 - REV 1 11/1/21 Page 2
Install the Tool Mount Brackets in any position on the rack using the Hex Bolt and Nut and tighten
securely. Use the threaded knob to secure the tools in place on the mount. Depending on the size of
the tools being mounted, you may need two mounts to carry them securely.
JTM2020 - REV 1 11/1/21 Page 3
4
2
6
5
1
6
3
NOTES:
JTM2020 = BARE STEEL OPTION
1.
JTM2021 = BLACK POWDER COAT
2.
WEIGHT = APPROX 1.42 LBS
3.
ITEM
NO.
PART NUMBER
DESCRIPTION
QTY.
1
2JTM2020-02
TOOL MOUNT CLAMP PLATE
1
2
2JTM2020-01
TRAIL TOOL MOUNT BASE
1
3
KN1002
KNOB, M10X1.5 THREADED HOLE, PLASTIC
1
4
HB10150M45ZPCL88
HEX BOLT M10-1.50 x 45mm ZINC PLATE CL8.8
1
5
HN10150MZPCL8
HEX NUT M10 X 1.50mm ZINC PLATE CL8
1
6
FW3816ZP
FLAT WASHER Ø3/8" X 1.00 ZINC PLATE
3
N/A
TRAIL TOOL MOUNT
JTM2020
JTM2021
SHEET 1 OF 1
9/20/2022
MCH
UNLESS OTHERWISE SPECIFIED:
SCALE: 1:1.5
REV
DWG. NO.
DESCRIPTION:
NAME
DATE
MFG APPR.
ENG APPR.
CHECKED
DRAWN
BLACK POWDER COAT
FINISH:
MATERIAL:
DIMENSIONS ARE IN INCHES
TOLERANCES:
0.010
ANGULAR: MACH
1
TWO PLACE DECIMAL
0.015
THREE PLACE DECIMAL
0.005
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN
THIS DRAWING IS THE SOLE
PROPERTY OF LOD LLC. ANY
REPRODUCTION IN PART OR AS A
WHOLE WITHOUT THE WRITTEN
PERMISSION OF LOD LLC IS
PROHIBITED.
LOD LLC.
A
SHEET SIZE: B
ECO:
-
JTM2020 - REV 1 11/1/21 Page 4
JT Jeep
BED RACK TRAIL TOOL
MOUNT
SHIPPING SHEET
Packaged by:
________________________
On:
________________________
Instruction
Booklet BOLT KIT
(may vary)
TOOL MOUNT CLAMP
PLATE
2JTM2020-02
(x1)
TOOL MOUNT BASE
2JTM2020-01
(x1)
BLACK OPS SERIES
JTM2020 - REV 1 11/1/21 Page 5
JT Jeep
JEEP JT BED RACK
BOLT KIT
Packaged by:
________________________
On:
________________________
FLAT WASHER
Ø3/8 X 1.00
(x2)
KNOB,M10X1.5
THREADED HOLE
KN1002
(x1)
3/4” - 10 x 2.5”
7/8” - 9 x 2.5”
1” - 8 x 2.5”
5/8” - 11 x 2.5”
5/8” - 11 x 2”
4mm x 0.7mm
3mm x 0.5mm
5mm x 0.8mm
6mm x 1.0mm
7mm x 1.0mm
8mm x 1.25mm
10mm x 1.5mm x 45mm
12mm x 1.75mm (M12mm-1.75 x 45mm)
14mm x 2.0mm
16mm x 2.0mm 14mm x 35mm
12mm x 1.75mm (M12mm-1.75 x 40mm)
10mm x 1.5mm (M10mm-1.5 x 35mm)
12mm x 1.5mm (M12mm-1.5 x 45mm)
10mm x 1.5mm (M10mm-1.5 x 45mm)
HEX BOLT M10-1.50 X 45MM
(38659)
(x1)
Hex Nut Sizes
1/2"
5/8" 9/16"
3/4"
7/8”
1”
#10
#8
#6
#5
#4
#3
1/4"
5/16"
7/16"
3/8"
#12
#2
#1
#0
14mm
2mm
2.5mm
3mm
4mm
5mm
6mm
8mm
10mm
12mm
16mm
18mm
20mm
7mm
HEX NUT M10-1.50
40308
(x1)
SAE Flat Washer Sizes
#2
1/4"
5/16"
5/8"
9/16"
1/2"
7/16"
3/8"
3/4"
7/8"
1"
#12
#4
#6
#8
#10
SAE Flat Washer Sizes
#2
1/4"
5/16"
5/8"
9/16"
1/2"
7/16"
3/8"
3/4"
7/8"
1"
#12
#4
#6
#8
#10
BLACK OPS SERIES
/
