NEC Europe Ltd
PDP Department
50XR5 Installation Guide
50” Plasma Display Rev 1.2
www.neceurope.com
Contents:
Product Description and Notes Page 1
Ventilation Requirements
Page 2
Display Dimensions
Front, Top & Bottom Page 3
Rear
Page 4
Left & Right Side
Page 5
Display Dimensions w/Optional Speakers and Stand
Page 6
Connections
Page 7
Control Codes
Page 8
Product Description
Type: Plasma Display. Screen Surface: Anti-Reflective.
Resolution: 1365x768. Dimensions: 1226(W) x 736(H) x 100(D)mm.
Aspect Ratio: 16:9. Weight: 44.5Kg.
Color Correction: NEC CCF (Capsulated Color Filter, in panel) Power Consumption: 435W (Typ).
and AccuCrimson (in front filter). EMI: Class B.
Notes
• This document is intended to be used as a reference guide to supply useful information for a design or installation. It is not
intended to be a step-by step procedure for installation.
• 4:3 sources can be displayed on the 16:9 screen in either normal aspect ratio with bars on the left or right, or stretched horizontally
to fill the screen using the menus (see “Aspect Modes” in menus and user manual).
• To avoid image retention or burn in please refer to the Phosphor disclaimer and operating manual provided with this product. NEC
shall accept on responsibility for the misuse of this product.
• Distances are in inches, for millimeters multiply by 25.4.
• Distances may vary ±5%.
Maximum Tilt Angles
Below is the maximum angle that the display can be tilted
Landscape 30°
Max Tilt
PX-50XR5 Page 1 of 8
NEC Europe Ltd
PDP Department
50XR5 Installation Guide
50” Plasma Display Rev 1.2
www.neceurope.com
Ventilation Requirements (all models)
Dimensions below are minimum required for proper ventilation.
NOTE: The ventilation space should not be covered or closed off at the front of the opening. If for some reason the
opening needs to be covered, other means of ventilation will need to be incorporated into the design. Contact NEC for
design review and recommendations.
PX-50XR5 Page 2 of 8
NEC Europe Ltd
PDP Department
50XR5 Installation Guide
50” Plasma Display Rev 1.2
www.neceurope.com
Display dimensions
POWER BUTTON
28.98
AC INLET
SPEAKER TERMINAL
CONTROL BUTTONS
20.55
IR Receiver
IR
2.45 1.45
48.27
5.0
0.78
0.78
0.78
0.78
0.78
15.20
6.03
18.11
0.38
3.65
1.95
1.79
24.48 (Screen Area)
25.54
43.53 (Screen Area)
44.45
5
0
FILTER SURFACE
PX-50XR5 Page 3 of 8
NEC Europe Ltd
PDP Department
50XR5 Installation Guide
50” Plasma Display Rev 1.2
www.neceurope.com
Display dimensions (cont.)
20.86
for PC
4-M4 DEPTH 10
for mount unit
4-M8 DEPTH 18
for mount unit
8-M4 DEPTH 14
4.96
2.56 2.56
4.96
25.75
3.89
4.02
10.28
7.91
17.52
4.22
48.27
4.16
9.64
9.64
PX-50XR5 Page 4 of 8
NEC Europe Ltd
PDP Department
50XR5 Installation Guide
50” Plasma Display Rev 1.2
www.neceurope.com
Display dimensions (cont.)
POWER BUTTON
1
2
°
for SPEAKER
13.88
13.95
0.59
0.91
0.22
1.59
0.67
0.41
0.20
28.98
21.69
3.64
0.47
3.94
1.66
2.28
3.94
14.48
3.02
5.67
6.61
8.90
11.80
14.15
16.06
PX-50XR5 Page 5 of 8
NEC Europe Ltd
PDP Department
50XR5 Installation Guide
50” Plasma Display Rev 1.2
www.neceurope.com
Dimensions with optional speakers [PX-SP2U] and stand [PX-ST2U]
0.23
3.63
3.94
32.22
4.696.97
15.59
2.84
23.302.84
3.140.02
3.14 0.02
54.64
1.06
26.93
3.25
17.73
11.06
2.05
0.86
0.09
4.72
Optional Speakers
PX-50XR5 Page 6 of 8
NEC Europe Ltd
PDP Department
50XR5 Installation Guide
50” Plasma Display Rev 1.2
www.neceurope.com
Connections
Ext. Speaker Connections
Control Panel
Located at right side of display
AC inlet
Power Switch
PX-50XR5 Page 7 of 8
NEC Europe Ltd
PDP Department
50XR5 Installation Guide
50” Plasma Display Rev 1.2
www.neceurope.com
Control Codes
Function Code Data
POWER ON 9FH 80H 60H 4EH 00H CDH
OFF 9FH 80H 60H 4FH 00H CEH
INPUT SWITCH VIDEO1 (RCA) DFH 80H 60H 47H 01H 01H 08H
VIDEO2 (S-Video) DFH 80H 60H 47H 01H 02H 09H
DVD1/HD1 DFH 80H 60H 47H 01H 05H 0CH
DVD2/HD2 DFH 80H 60H 47H 01H 06H 0DH
RGB1 (15pin HD) DFH 80H 60H 47H 01H 07H 0EH
DVD3/HD3 (HDMI) DFH 80H 60H 47H 01H 0EH 15H
DVD4/HD4 (HDMI) DFH 80H 60H 47H 01H 1AH 21H
AUDIO MUTE ON 9FH 80H 60H 3EH 00H BDH
OFF 9FH 80H 60H 3FH 00H BEH
PICTURE MODE NORMAL DFH 80H 60H 0AH 01H 01H CBH
THEAT.1 DFH 80H 60H 0AH 01H 02H CCH
THEAT.2 DFH 80H 60H 0AH 01H 03H CDH
DEFAULT DFH 80H 60H 0AH 01H 04H CEH
BRIGHT DFH 80H 60H 0AH 01H 05H CFH
SCREEN MODE: STADIUM DFH 80H 60H 51H 01H 02H 13H
ZOOM DFH 80H 60H 51H 01H 03H 14H
NORMAL DFH 80H 60H 51H 01H 04H 15H
ANAMORPHIC (FULL) DFH 80H 60H 51H 01H 05H 16H
2.35:1 DFH 80H 60H 51H 01H 0AH 1BH
AUTO PICTURE ON DFH 80H 60H 7FH 03H 03H 09H 00H 4DH
OFF DFH 80H 60H 7FH 03H 03H 09H 01H 4EH
CINEMA MODE ON DFH 80H 60H C1H 01H 01H 82H
OFF DFH 80H 60H C1H 01H 02H 83H
NOTE: Contact your NEC rep for codes not listed.
NOTE: Use a cross/reverse/null modem cable.
Cable Connection
Communication Protocol:
Interface: RS-232C Parity: Odd
Communication: Asynchronous Stop Bit: 1 bit
Baud Rate: 9600 bps Communication Code: Hex
Data Length: 8 bits
PC Control Connector (D-Sub 9P)
NOTE: If so Desired, jumper “Request to send” and “Clear to Send” together on both ends of the cable to simplify cable connection. These
connections are not required. The only connections required are pins 2 (RxD), 3 (TxD) and 5 (GND).
PX-50XR5 Page 8 of 8
/
