Commax CDL-200P / CDL-220PB Owner's manual

Brand: Commax

Model: CDL-200P / CDL-220PB

Type: Owner's manual

This manual is also suitable for

CDL-200P· 210P

CDL-200P/200R

USER MANUAL

제품의 외관 및 사양등은 제품 개량을 위해 사전예고 없이 변경될 수 있습니다. 제품의 색상은 인쇄과정으로 인해 실제와 약간 다를수 있습니다.

본 리플렛에 실린 모든 사진을 불법으로 도용했을 경우, 저작권법에 의거 민/형사상의 책임을 지게 되니 무단전제와 복제를 금합니다.

Durable Door lock without worry about A/S

Durable body of metal

Auto lock/rewind/double lock function

Use of 3D touch and imaginary function to secure password

Password/Smart key can be registered multiple

Multi-level volume control / Selectable silence function

Light button that is visible even in dark places

Emergency power function (9V square battery)

High-voltage protection/Fire protection/Anti-hack system

Intuitive registration UI

* Do not disassemble, repair or modify the device by any unauthorized person.

* This product is for indoor, we do not guarantee any operation at other environment.

* Please use the product after reading User’s Manual.

* Do not press the buttons with any tools(Ex. Awl, Pins..)

* Change your access code from time to time for your safety.

* Do not impact on the device.

* Be careful that leakage or rupture may occur when inserting a battery in wrong direction.

* Be careful that water should not seep into the device.

* When replacing a battery, change all the batteries with new alkaline batteries.

* Please wipe the product with soft, dry towels.

* Please keep product warranty card for A/S.

* Do not use this product with other purposes except digital door lock function.

Products specifications and components

Outdoor Names and Functions

*The components of the product may change depending

on the installation environment.

Due to non-key door lock, it may cause

destruction of digital door lock when it is in trouble.

1. It is a function to strengthen the security of password

and it is a function to set a virtual number instead of the

original number when the password is registered and

authenticated for more than 1 second.

Ex) When 1 is long pressed: It is recognized as a virtual

number other than 1.

2. Combined with the imaginary function of this product,

password security is further strengthened.

3. You can set each number and you can check that the

lamp blinks when you press for more than 1 second.

4. 3D touch mode is turned off at the factory.

Reference

1. When the 3D touch mode is released, the password is

reset to "1234".

2. In case of master registration / deletion, fire / accident, etc.,

it is recognized as normal number mode.

Cautions

How to set and dismiss 3D touch

Beep

Open the battery cover and

press the [Registration] button.

1. Enter password 2. Press the [#] button twice in

succession, then press

the 0 button.

Touch the outdoor

license plate to

turn on the LED

and enter the

registered password.

3. Press [Registration]button

When you press the [Registration] button on the outdoor

side body, the 3D touch function is turned on or off.

- Set tone: Piriricic

- Off sound: Piric

Open the door in outdoor

Method 1

Open the door by password

1. Enter password 2. Press [*]button

Touch the outdoor

license plate to turn

on the LED and

enter the registered

password.

When you press the

[*] button, you will

hear a confirmation

tone and then open

when you open

the door.

How to set auto lock, manual lock

Make sure to turn off the Mortise Square Lock on the indoor body.

1. Enter password 2. Press [#]button

Touch the outdoor

license plate to turn

on the LED and

enter the registered

password.

3. Press [4] or [7]button and press registration button

Auto lock setting: Press the [4] button and press the register

button to set the auto lock function after a confirmation

tone sounds.

Manual lock setting: After pressing the [7] button and pressing

the register button, the manual lock function is set after a tone

is heard.

Press the [#] button

twice in succession

COMMAX Co., Ltd.

Thank you for purchasing COMMAX products.

Before you use, please read this manual and use

correctly. COMMAX is not responsible for any safety

accident due to abnormal operation of the products.

Warning for Safety

These warnings are to secure user’s safety and prevent the possible loss of property.

Please read carefully below to use the product in a correct manner.

Sort Using frequency

Number of

channels

Modulation

format

Antenna power

RFID 13.56Mhz 1 ASK 93.5dBu/under m@ 10m

Wireless devices for

afety systems

(optional)

447.275Mhz 1 FSK 10mW/under

Outbody

Inbody

Mortise & Stricker(Option1) Screw

Installation

instruction

User manual

Big Mortise & Stricker(Option2)

8 Batteries

Construction diagram

4 Smart key

2 Emergency

(Key formula only)

Outdoor shaft

How to register Smart key

When registering or re-registering a smart key, you must register

all the smart keys you have at once. Also registered smart keys are

door lock only. It may not work when used with other products.

How to register and change password

Be sure to register your password with the door open.

3. Enter new password

After entering the new password(4~12 digits),

press * button and the confirmation tone sounds

and registration is completed. Press the * button

once more to end registration.

1. If you register a new password, the existing password

will be automatically deleted.

2. Do not use consecutive numbers when registering your

password.

Cautions

1. Press

[registration] button

2. Press [1]button in the number

plate of outdoor side

Beep

Open the battery cover and

press [registration]button

1. When adding the password, repeat the above item 3

before the number plate lamp turns off.

2. Up to 4 password can be registered

Reference

No Name Specifications

1 Battery cover

This cover protects the batteries and the registration

button.

2 Interlocking pack Receive (CDL-447, optional)

3 Registration button It is used to register or change password or smart key

4 Mortise

It is attached to the side of the door and closes or locks the

door.

Dead bolt

(Square locking type)

It locks the door by locking it on the door frame.

6 Latch bolt It serves to keep the door shaken

7 Alkal

ina AA battery It is a power source that operates the door lock.

8 Double lock button

It can be used to lock the door so that it can not be opened

outside,such as during nighttime hours that require

attention.

9 Indoor handle It is used to open or close the door indoors.

Indoor Names and Functions

MORTISE TYPE

BIGMORTISE TYPE

1. Press

[registration] button

2. Press [2]button in the number

plate of outdoor side

Beep

Open the battery cover and

press [registration]button

3. Contact smart key to smart key input unit

If you touch the smart key to be registered one by one,

you will hear a confirmation sound every time you touch it.

Registration is completed by clicking the [Registration]

button on the indoor side body.

1. When registering a new smart key, the existing smart

key is automatically deleted.

Reference

Cautions

1. When adding the password, please repeat the above

item 3 before the [License plate lamp] turns off.

2. Up to 30 smart keys can be registered.

How to register the linker (optional)

1. You can register up to 5 interlocks.

2. Repeat step 3 when registering the linker.

Reference

3. Press the [Register] or [OP / CL] button on the linker

After pressing the front door button of the wall pad(video phone),

press the [Registration] or [OP / CL] button of the interlocker

when the standby mode is canceled.

How to delete smart key, linker

2. Press number in the number plate

3. Press #button

Press and hold the [#] button for 5 seconds to delete

the registered smart key or interlock.

1. Press

[registration] button

2. Press [3]button in the number

plate of outdoor side

Beep

Open the battery cover and

press [registration]button

- Smart key deletion: No 7 button

- Deleting the interlock: No 8 button

1. Press

[registration] button

Beep

Open the battery cover and

press [registration]button

9V emergency battery

(Separate purchase)

Sort Specifications

Password 4-12 digits (Up to 4 can be registered)

RF key It can register within 30

Wallpad interlock Optional (CDL-447)

Rated voltage DC 6V LR6 1.5V AA sized alkaline batteries 8

Emergency power DC 9V Alkaline batteries 8 (Separate purchase)

High temperature sensing Temperature sensor type 60+-10 dgrees

Out body AL,ZN,ABS,PC

In body AL,ZN,ABS,PC

Opening method

Type of product

CDL-200PSNF(Fire-proof, temperature-sensitive form, non-key, primary keylock / F-T-NK-M)

CDL-200PSKF(Fire-proof, temperature-sensitive form, key primary keylock / F-T-K-M)

material

No Name Specifications

1 Name board Enter the number when registering or changing password.

2 Battery warning light Turns on with an audible alarm at low voltage.

3 Smart key input unit

It is the place where smart keys are recognized to open

the door. You can open the door by registering the smart

key or touching the registered smart key.

4 Emergency hole Key formula only (CDL-200PSKF)

5 Outdoor handle It is Used to

open or close doors from outdoors.

6 Emergency power terminal

In case the battery is completely discharged, you can use

9V battery then, the power will be on.

Try 5 times

in a row??

Anti-mischief alert and 1 minute pause

Deadbolt Jam alert

Volume Adjustment

Deadbolt of indoor unit must be come out from mortise before setting

How to

1. Input Password 2. Press [#] button

When LED lights on

after touching

number plate,

input registered

password

3. Press [3] or [6] to adjust volume

[3] for volume up

[6] for volume down

1. Available total 8 levels of volume sound

2. If sound pause mode, numbers are only flicking

without sound

Reference

1. To deactivate alert sound, open the door from indoor body

handle

2. If mechanical key is available, deactivate alert sound by key

Reference

If unregistered [password], [smartkey] keeps used more than 5 times

continuously, freeze operation for 1 minute with alert sound.

When deadbolt is jammed during door

open/close, alert sound of

bee bee bee bee” rings 3 times.

1.If no sound deactivation or door lock malfunction,

product installed position has to be adjusted.

Please contact your local installer or service provider.

Caution

Door Open Alert during automatic lock setting

Battery Replacement Alert

1. Lifetime of battery can be varied according to

manufacturers, date of production, working condition.

(Expected lifetime : 10 months assuming no wireless

operation, AA type alkaline 8ea, 10 times per one day use)

2. If battery liquid leaks out, product can be damaged.

Regular checking is recommended every 6 months.

3. Battery lifetime might be shortened if wireless module

is activated.

Caution

If battery alert light is on on number plate or beep sounds ring, battery has to

be replaced. All batteries must be replaced with new one at once.

To inform door open status during automatics lock

setting, alert sound rings 2 times with each 15 seconds

interval if door opened.

Dual authentication / Registration authentication setting

1. Input password 2. Press [#] button twice,

press [1] or [8] button.

Touch number

plate. When LED

lights on, input

registered

password

3. Press [Regist.] button.

Once press [Regist.] button on outdoor body,

Dual authentication or registration authentication

mode is on or off.

Active: Sound - Piriricic

Deactive: Sound - Piric

[1] : Dual authentication

[8] : Registration

authentication

1. If dual authentication mode is activated, Password +

Card should be confirmed to open to door.

(door open by BLE keeps available.)

2. If registration authentication mode is activated,

first authentication by existing password should be done

for the next step.

* No dual authentication / registration authentication is

activated if factory setting.

* To deactivate dual authentication / registration

authentication, repeat the same procedure for activation

Reference

Beep

Open the battery cover and

press [registration]button

Burglar Alert

If door to be opened by abnormal operation such

as door gap break through, burglar alert rings

with more than 80db noisy sound.

How to deactivate burglar or temperature alert

Remove batteries or [password + *] , [smartkey touch]

if temperature is too high, no deactivation.

Deactivation from outdoor unit

1. Input Password 2. Press [#], [9] button

When LED lights

on, input password

Press [#] then press [9],

indoor dual lock is off

with beep sound

Summary of how to use

Self-Diagnosis Table by each LED number flicking

To see the status of product by means of checking flicking number

Factory Reset Mode

1.All settings back to the default after factory reset

Caution

1. Press

[Registration] button.

2. Input “123578951” when

number plate lights on

BEEP

Open the battery cover and

press [Registration] button for 5 secs

3. Press [#] button for 2 secs.

Factory default mode is completed with beep sound.

High Temperture Alarm

Once extremely high temperature is detected

(60℃± 10℃), locker is automatically

released to open the door with

huge sound to secure user’s

safety.

9V emergency battery

(sold separately)

Press [Password] and [ * ] to open the door while contacting

terminals of 9V battery to emergency power outlet.

Emergency Power

When door can not be opened due to fully discharged battery.

1. Contact the terminals of 9V battery to emergency power outlet

When door is not opened due to malfunction.

Open the bottom cover of outdoor body to use

mechanical key box. Key-in to open the door

for emergency release.

1.Your mechanical key is recommended to be stored

outside of the door for emergency use.

Caution

Emergency Key

Open door with smart key

1. Contact smart key to smart key input unit

When the registered [Smart Key] is touched to the

smart key input part, a confirmation tone is heard

and it opens when you open the door.

Method 2

Open door by interlocking(Optional)

1. Press the [OP/CL] button on the interlock

Press the [OP / CL] button on the interlock to

open the door.

Method 3

Door locking in indoor and outdoor

1. When you press [double lock] button in manual lock

mode, you will hear a "beep" buzzer sound when the door

is locked and inform you that the door is lockedv.

Reference

Set lock Indoor Outdoor

Auto lock

Automatically locked after

2 seconds after

Locked automatically after 2

seconds after door closes

Manual lock

Press the [double lock] button

on the indoor side body

Touch the number plate

during 2 secods

Internal double lock setting

Setting

How to release internal

It is a function that can not open a door with a password or a smart

key outside the door.

1. While the door is locked, press and hold the [double lock]

button for 3 seconds

If you press and hold the [DUAL LOCK] button for

3 seconds, the setting is completed with "OK" sound.

1. Push or pull the knob

from inside to open the door

2. Press the [double lock]

button inside and dismiss

Sound Pause Mode

Sound is back to the original volume if pause mode is

operated once

Reference

Temporary silence function (1 time) regardless latest volume setting

How to

1. Touch number plate and press [#]

2. Press [*] after password or, contact Card to open the door.

ACTION SELF-DIAGNOSIS

Flicking ALL LEDs -Anti-mischief alert and 1 minute pause

Flicking LED number 2 -Error on password, card

Flicking LED number 3

- Full of registered password, card

Flicking LED number 4 - Deadbolt Jam

Flicking LED number 5 - Burglar Alert

Flicking LED number 6 - Unregistered password, card

Flicking LED number 7 - Already registered address

Flicking LED number 8 - Fire Alarm

Flicking LED num

ber 9 - Dual lock from Indoor unit

Flicking LED number 0

CDL-200P CDL-200R

Function Default

Password change 1234

[Registration] button ⇒ [1] button ⇒ Password to register⇒ [*] button⇒ [*] button

Card registration None

[Registration] button ⇒ [2] button ⇒ Card (tag) recognition

(Continuous registration) ⇒ [Registration] button

Delete all card

[Registration] button ⇒ [7] button ⇒ [#] button More than 5 seconds

Interlocking registration None

[Register] button ⇒ [3] button ⇒ Remote con

trol [OP / CL]

⇒ [Registration] button

Delete the all interlocking

[Registration] button ⇒ [8] button ⇒ [#] button More than

5 seconds

Open the door indoors

Door lock handle: Push the manual opening / closing device towards the door.

Auto lock: Auto lock when the door is closed

Manual Locking: Press the [Internal Dual Locking] button

Password: LED of window number LED ON ⇒ Enter password ⇒ Press [*] button

Card: Card contact with card recognition

Emergency key: Rotate after inserting emergency key into Emergency key insertion part

Auto lock: Auto lock when the door is closed

Manual locking: Touch the license plate of the window for 2seconods

Auto lock setting

Enter the password ⇒ Press the [#] [#] button ⇒ Press the [4] button ⇒

Press the [

Registration

] button

Manual lock setting

Enter the password ⇒ Press

the [#] [#] button ⇒ Press the [7] button ⇒

Press the [

Registration

] button

Enter the password ⇒ Press the [#] [#] button ⇒ Press the [1] button

(Individual authentication / Dual authentication)

⇒ Click the [

Registration

] button

Enter the password ⇒ Press the [#] [#] button ⇒ Press the [8] button

(General registration / double registration)

⇒ Click the [

Registration

] button

Enter the password ⇒ Press the

[#] [#] button ⇒ Press the [0] button ⇒

Press the [

Registration

] button

Set sound (beep sound), release sound (beep sound)

Internal dual lock LED setting Release

Enter the password ⇒ Press the [#] [#] button ⇒ Press the [5] button ⇒

Press the [

Registration

] (On/Off)

Internal force lock setting Press and hold the [Internal force lock] button for 3 seconds

Indoors: manual opening and closing with door open

and door closing

Outdoors: Enter the password ⇒ Press the [#] button ⇒ Press the [9] button

Etiquette mode function Normal mode Password: Press [#] button ⇒ Enter password ⇒ Press [*] button

Treble: Enter password ⇒ Press [#] button ⇒ Press [3] button

Bass: Input password ⇒ Press [#] button ⇒ Press [6] button

Indoor: When battery is removed

Outdoors: Password, card authentication

Buzzer volume setting

Relea

se alram sound

Set registration

authenitication mode

Release

3D touch authenitication mode Release

Release internal force lock

Close the door indoors

Open the door outdoors

Close the door outdoors

Automatic

locking

Set dual

authenitication mode

Release

Commax CDL-200P / CDL-220PB Owner's manual

Brand: Commax

Model: CDL-200P / CDL-220PB

Type: Owner's manual

This manual is also suitable for

CDL-200P· 210P

Download PDF

report

Commax CDL-200P / CDL-220PB Owner's manual

This manual is also suitable for

Commax CDL-200P / CDL-220PB Owner's manual

Related papers

Other documents