Samsung SHS-6020 Quick User Manual

Brand: Samsung

Model: SHS-6020

Type: Quick User Manual

Quick Samsung SHS-6020 User Guide

January 28, 2016.

By: Jeffrey Leung 100899037

Initialization (also known as factory reset)

1. Open Battery Cover

2. Hold the [Register] button for 5 seconds

3. When the number pad is lighted, enter 4560852580 then press [*]

Password Change

*register password after initialization, and remember to hold the door opened*

1. Briefly press the [Register] button

2. Enter the default password after initialization “12345” when the number pad is lighted

and press the [*]

3. Enter a new password (5 to 12 digits) and press the [*] button

4. Re-enter new password and press [*]

Adding a Card or Key Tag

Up to 20 maximum

1. Pressing the [Register] button(from the inside)

2. Entering the password(from the outside) then press [*]

3. Placing the card or key tag on the card reader from the outside

To register more cards: place another card on the reader within 20 seconds of registering

previous cards

Deleting a Card or Key Tag

* All Cards/Key Tags are deleted*

1. Press and hold the [Register] button for 3 seconds

2. Enter the password on the keypad and press [*]

Opening Door from the outside with a password

1. Pressing the [Enter Number] button (Silver button on the bottom of the touchscreen

pad)

2. Enter the two arbitrary buttons that are lighted in order

3. When all the numbers are lighted, enter your password and press [*]

Removing two arbitrary numbers

1. Briefly press the [Register[ button on the inner body

2. Press [7] for Multi-leveled Security code entry mode(two arbitrary numbers)

Or [9] Common mode

3. Press [*], security mode will be set.

Opening Door from the outside with a card or a key tag

1. Place card/key tag on the card reader

2. Door will open after 1 second

Manual Locking Mode

To set manual locking mode, from the inside cover where the battery is located, flick the switch

to “M”.

 Press the [Enter Number] Button on the outside

 Press the [Close] button on the inside

Automatic Locking Mode

To set automatic locking mode, from the inside cover where the battery is located, flick the

switch to “A”.

 The door is automatically locked 2 seconds after the door is closed

Double Authorization Mode(Password + Card/Key tag)

1. Briefly press the [Register] button on the inner body

2. Press [4] for Double authorization on

Or [6] Double authorization off

3. Press [*], authorization mode will be set.

Sound Settings

Changed from inside cover where the battery is located

 [0] button: All sounds except the alarm sound are deactivated

 [1] button: Weaker

 [2] button: Louder

Samsung SHS-6020 Quick User Manual

Samsung SHS-6020 Quick User Manual

Samsung SHS-6020 Quick User Manual

Related papers

Other documents