OKI C711WT User guide

Brand: OKI

Model: C711WT

Category: Laser/LED printers

Type: User guide

User’s Guide

&:7

Preface > 2

REFACE

Every effort has been made to ensure that the information in this document is complete,

accurate, and up-to-date. The manufacturer assumes no responsibility for the results of

errors beyond its control. The manufacturer also cannot guarantee that changes in software

and equipment made by other manufacturers and referred to in this guide will not affect

the applicability of the information in it. Mention of software products manufactured by

other companies does not necessarily constitute endorsement by the manufacturer.

While all reasonable efforts have been made to make this document as accurate and helpful

as possible, we make no warranty of any kind, expressed or implied, as to the accuracy or

completeness of the information contained herein.

The most up-to-date drivers and manuals are available from:

http://www.okiprintingsolutions.com

OKI is a registered trademark of Oki Electric Industry Co., Ltd.

Oki Printing Solutions is a registered trademark of Oki Data Corporation.

Microsoft, MS-DOS and Windows are registered trademarks of Microsoft Corporation.

Apple, Macintosh, Mac and Mac OS are registered trademarks of Apple Inc.

Other product names and brand names are registered trademarks or trademarks of their

proprietors.

This product complies with the requirements of the Council Directives 2004/

108/EC (EMC), 2006/95/EC (LVD), 1999/5/EC (R&TTE) and 2009/125/EC

(ErP), as amended where applicable, on the approximation of the laws of the

member states relating to Electromagnetic Compatibility, Low Voltage, Radio &

Telecommunications Terminal Equipment and Energy Related Products.

The following cables were used to evaluate this product to achieve EMC directive

2004/108/EC compliance and configurations other than this may affect that compliance.

CABLE TYPE LENGTH

(METRE)

CORE SHIELD

Power 1.8

✘✘

USB 5.0

✘✔

Parallel 1.8

✘✔

LAN 15.0

✘✘

Emergency first aid > 3

MERGENCY

FIRST

AID

Take care with toner powder:

If swallowed, give small amounts of cold water and seek medical

attention. DO NOT attempt to induce vomiting.

If inhaled, move the person to an open area for fresh air. Seek medical

attention.

If it gets into the eyes, flush with large amounts of water for at least 15

minutes keeping eyelids open. Seek medical attention.

Spillages should be treated with cold water and soap to help reduce risk

of staining skin or clothing.

ANUFACTURER

Oki Data Corporation,

4-11-22 Shibaura, Minato-ku,

Tokyo 108-8551,

Japan

Contents > 4

ONTENTS

Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Emergency first aid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Manufacturer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Importer to the EU/authorised representative. . . . . . . . . . . . . . . . . . . . .3

Environmental information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Notes, cautions and warnings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

About this guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Documentation suite . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

What this book describes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

On-line usage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Printing pages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Printer overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Front view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Rear view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Changing the display language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Getting started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Power saving mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Switching off. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Paper recommendations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Cassette trays. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Multi purpose tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Face down stacker. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Face up stacker. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Loading paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Cassette trays. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Multi purpose tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

How to access the driver screens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Printing preferences in Windows applications . . . . . . . . . . . . . . . . . . . . . .20

Postscript emulation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

Changing the driver defaults. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

Changing the application’s driver settings. . . . . . . . . . . . . . . . . . . . . . .21

Setting the driver device options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

Mac OS X . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

Color setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

Color Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

Color Print . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

Gray Scale (White) Print. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

Print Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

White On . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

White Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

Finishing options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28

Collating. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29

Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

Mac OS X . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

Separating queued print jobs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

Windows separator page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

Mac OS X cover page. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

Contents > 5

Cover print . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32

Mac OS X . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32

Custom page size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33

Windows PostScript . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33

Mac OS X . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34

Printing multiple pages on one sheet (n-up) . . . . . . . . . . . . . . . . . . . . . . .35

Windows PostScript . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35

Mac OS X . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36

Scale to page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37

Mac OS X . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37

Transfer/transparency film printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38

Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38

Mac OS X . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39

How to print with application setting . . . . . . . . . . . . . . . . . . . . . . . . . . .40

Adobe Photoshop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40

Adobe Illustrator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41

Menu functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42

Operator panel: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42

How to change the settings - user . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43

How to change the settings - administrator . . . . . . . . . . . . . . . . . . . . . . .43

Configuration menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44

Print information menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45

Shutdown menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45

Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46

Admin setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49

Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54

Boot menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57

Replacing consumable items. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57

Toner cartridge replacement. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57

Image drum replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60

Replacing the transfer belt unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63

Fuser replacement. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65

Cleaning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67

...the unit casing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67

...the LED head. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67

...the paper feed rollers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68

Installing upgrades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69

Memory upgrade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69

Additional paper tray(s) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72

Setting the driver device options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73

Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73

Mac OS X . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73

Storage cabinet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74

Major printer components and paper path . . . . . . . . . . . . . . . . . . . . . . . .74

Paper sensor error codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75

Clearing paper jams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .83

Oki contact details. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84

Notes, cautions and warnings > 6

OTES

CAUTIONS

AND

WARNINGS

For the protection of your product, and in order to ensure that you benefit from its full

functionality, this model has been designed to operate only with genuine original toner

cartridges. Any other toner cartridge may not operate at all, even if it is described as

“compatible”, and if it does work, your product's performance and print quality may be

degraded.

Use of non-genuine products may invalidate your warranty.

Specifications subject to change without notice. All trademarks acknowledged.

NOTE

A note provides additional information to supplement the main text.

CAUTION!

A caution provides additional information which, if ignored, may

result in equipment malfunction or damage.

WARNING!

A warning provides additional information which, if ignored, may

result in a risk of personal injury.

About this guide > 7

BOUT

THIS

GUIDE

OCUMENTATION

SUITE

This guide is part of a suite of online and printed documentation provided to help you

become familiar with your product and to make the best use of its many powerful features.

The documentation is summarised below for reference and is found on the software CD

unless indicated otherwise:

> Installation Safety booklet: provides information for safe use of your product.

This is a paper document that is packaged with the product and should be read before

setting up your machine.

> Set-up guide: describes how to unpack, connect and turn on your product.

This is a paper document that is packaged with the product.

> User’s Guide: helps you become familiar with your product and make the best use

of its many features. Also included are guidelines for troubleshooting and

maintenance to ensure that it performs at its best. Additionally, information is

provided for adding optional accessories as your printing needs evolve. And helps

you become familiar with the many features of the driver software supplied with

your product.

> Network Guide: helps you become familiar with the functionality of the built in

network interface card.

> Installation Guides: accompany consumable items and optional accessories to

describe how to install them.

These are paper documents that are packaged with the consumables and optional

accessories.

> On-line Help: on-line information accessible from the printer driver and utility

software.

HAT

THIS

BOOK

DESCRIBES

This book provides a convenient on-screen reference to the many features of the driver

software supplied with your machine.

Where possible the instructions for both Windows and Mac operating systems have been

combined, where there is a significant difference these have been split out and described

individually.

NOTE

Images used in this manual may include optional features that your product

does not have installed.

NOTE

Terminology may vary between operating systems. Windows use tabbed

dialogue boxes, whereas Mac OS X uses pop-up menus. For consistency

throughout this manual we will refer to tabs.

About this guide > 8

LINE

USAGE

This guide is intended to be read on screen using Adobe Reader. Use the navigation and

viewing tools provided in Adobe Reader.

There are many cross-references within this book, each highlighted as blue text. When you

click on a cross-reference the display will instantly jump to the part of the manual

containing the referenced material.

By using the button in Adobe Reader, you can navigate directly back to where you were

before.

You can access specific information in two ways:

> In the list of bookmarks down the left hand side of your screen, click on the topic of

interest to jump to the required topic. (If the bookmarks are not available, use the

“Contents” on page 4.)

> In the list of bookmarks, click on Index to jump to the Index. (If the bookmarks are

not available, use the “Contents” on page 4.) Find the term of interest in the

alphabetically arranged index and click on the associated page number to jump to

the page containing the term.

RINTING

PAGES

The whole manual, individual pages, or sections may be printed. The procedure is:

1. From the toolbar, select File > Print (or press the Ctrl + P keys).

2. Choose which pages you wish to print:

(a) All pages, (1), for the entire manual.

(b) Current page, (2), for the page at which you are looking.

page numbers.

(d) Click OK.

Introduction > 9

NTRODUCTION

Congratulations on choosing this colour printer.

Your printer includes these features:

> ProQ/High Quality, multi-level technology produces subtler tones and smoother

gradations of colour to lend photographic quality to your documents.

> 600 x 600, 1200 x 600 dpi (dots per inch) and ProQ2400 print resolution for high

quality image production showing the finest detail.

> Internet Protocol version 6 (IPv6).

> Single Pass colour Digital LED technology for high speed processing of your printed

pages.

> PostScript 3 emulations.

> 10Base-T and 100Base-TX network connection lets you share this valuable resource

among users on your office network.

Additionally, the following optional features are also available:

> Additional paper tray for loading a further 530 sheets to minimise operator

intervention, or different paper stocks for letterhead stationery, alternative paper

sizes or other print media.

> Additional memory allows printing of more complex pages.

> Storage Cabinet.

Introduction > 10

RINTER

OVERVIEW

RONT

VIEW

1. Output stacker, face down.

Standard printed copy delivery point. Holds

up to 350 sheets at 80g/m².

2. Operator panel.

Menu driven operator controls and LCD

panel

3. Paper tray.

Standard paper tray. Holds up to 530 sheets

of 80g/m² paper.

4. Multi purpose tray.

Used for feeding heavier paper stocks,

transparency and transfer media. Also for

manual feeding of single sheets when

required.

a. The display language can be changed to show different languages. (See “Changing the

display language” on page 12.)

5. Paper level indicator.

6. Front cover release lever.

7. Multi-purpose tray release recess.

8. Top cover release button.

9. LED heads.

10. Fuser release levers.

11. Toner cartridges (C,M,Y,W).

12. ID units (C,M,Y,W).

Introduction > 11

EAR

VIEW

This view shows the connection panel, the rear output stacker.

1. ON/OFF switch.

2. AC power socket.

3. Rear, face up stacker.

4. USB interface.

5. ACC interface (host USB).

6. Network interface.

7. Parallel interface.

a. The Network Interface may have a protective “plug” which

must be removed before connection can be made.

Introduction > 12

When the rear paper stacker is folded down paper exits the printer through the rear of the

printer and is stacked here face up. This is mainly used for heavy print media and

transparency/transfer media. When used in conjunction with the multi purpose feed tray,

the paper path through the printer is essentially straight. This avoids bending the paper

around curves in the paper path and enables feeding of up to 250g/m² media.

HANGING

THE

DISPLAY

LANGUAGE

The default language used by your machine for display messages is English. If required,

this can be changed using the Panel Language Set-up utility.

ETTING

STARTED

OWER

SAVING

MODE

If you do not use the machine for a while, it will enter the power saving mode to control

the power consumption of the device. To cancel or initiate power saving mode, press the

Power Save / Wake Up button on the control panel.

WITCHING

OFF

1. Press the Enter button on the control panel to enter the menu.

2. Press the Menu down button and scroll to the Shutdown menu.

3. Press the Enter button.

4. Press the Enter button to continue.

5. Press the Enter button to execute.

6. At the prompt, turn the power switch OFF.

NOTE

If your machine is connected locally (via USB or parallel*), when it transitions

to Sleep mode its status is viewed as off-line. To use the printer in this state,

you must press the Power Save / Wake Up button to exit sleep mode.

Paper recommendations > 13

APER

RECOMMENDATIONS

Your printer will handle a variety of print media, including a range of paper weights and

sizes, transparency and transfer media. This section provides general advice on choice of

media, and explains how to use each type.

The best performance will be obtained when using standard 75~90g/m² paper designed

for use in copiers and laser printers. Suitable types are:

> M-Real Data Copy Everyday 80g/m²

> Color Copy by Mondi 90g/m²

Use of heavily embossed or very rough textured paper is not recommended.

ASSETTE

TRAYS

If you have identical paper stock loaded in another tray (2nd or 3rd tray if you have one,

or multi purpose tray) you can set the printer to automatically switch to the other tray when

the current tray runs out of paper. When printing from Windows applications, this function

is enabled in the driver settings. When printing from other systems, this function is enabled

in the Print Menu. (See “Menu functions” on page 42.)

ULTI

PURPOSE

TRAY

The multi purpose tray can handle the same sizes as the cassette trays but in weights up

to 250

g/m². For very heavy paper stock use the face up (rear) paper stacker. This ensures

that the paper path through the printer is almost straight.

The multi purpose tray can feed paper widths from 76mm to 215.9mm and lengths from

127.0mm to 356mm.

For paper lengths exceeding 356mm (Legal 14in.) use paper stock between 90g/m² and

128g/m² and the face up (rear) paper stacker.

ACE

DOWN

STACKER

The face down stacker on the top of the printer can hold up to 350 sheets of 80g/m²

standard paper, and can handle paper stocks up to 188g/m².

Pages printed in reading order (page 1 first) will be sorted in reading order (last page on

top, facing down).

SIZE DIMENSIONS WEIGHT (G/M²)

a. A6 printing from the MP Tray only.

105 x 148mm Light 64 - 74g/m²

Medium Light 75 - 82g/m²

Medium 83 - 104g/m²

Heavy 105 - 120g/m²

Ultra heavy1 121 - 188g/m²

Ultra heavy2 189 - 220g/m²

Ultra heavy3 221 - 250g/m²

Tray 1/2/3: 64 - 220g/m²

MP Tray: 64 - 250g/m²

A5 148 x 210mm

B5 182 x 257mm

Executive 184.2 x 266.7mm

A4 210 x 297mm

Letter 215.9 x 279.4mm

Legal 13in. 216 x 330mm

Legal 13.5in. 216 x 343mm

Legal 14in. 216 x 356mm

Paper recommendations > 14

ACE

STACKER

The face up stacker at the rear of the printer should be opened and the tray extension

pulled out when required for use. In this condition paper will exit via this path, regardless

of driver settings.

The face up stacker can hold up to 100 sheets of 80g/m² standard paper, and can handle

stocks up to 250

g/m².

Always use this stacker and the multi purpose feeder for paper stocks heavier than

188g/m².

Loading paper > 15

OADING

PAPER

ASSETTE

TRAYS

1. Remove the paper tray from the printer.

Fan the paper to be loaded at the edges (1) and in the middle (2) to ensure that all

sheets are properly separated, then tap the edges of the stack on a flat surface to

make it flush again (3).

Loading paper > 16

3. Load paper (letter headed paper face down and top edge towards the front of the

printer), as shown.

> Adjust the rear stopper (a) and paper guides (b) to the size of paper being used.

To prevent paper jams:

> Do not leave space between the paper and the guides and rear stopper.

> Do not overfill the paper tray. Capacity depends on the type of paper stock.

> Do not load damaged paper.

> Do not load paper of different sizes or types at the same time.

> Close the paper tray gently.

CAUTION!

IMPORTANT: Set paper size dial (c) to the size of paper being used

(A4 in the above example).

Loading paper > 17

> Do not pull the paper tray out during printing (except as described below for the

2nd tray).

NOTE

> If you have two trays and you are printing from the 1st (upper) tray, you

can pull out the 2nd (lower) tray during printing to reload it. However, if

you are printing from the 2nd (lower) tray, do not pull out the 1st (upper)

tray. This will cause a paper jam.

> For face down printing, make sure the face up (rear) stacker (a) is closed

(the paper exits from the top of the printer). Stacking capacity is

approximately 350 sheets, depending on paper weight.

> For face up printing, make sure the face up (rear) stacker (a) is open and

the paper support (b) is extended. Paper is stacked in reverse order and

tray capacity is approximately 100 sheets, depending on paper weight.

> Always use the face up (rear) stacker for heavy paper (card stock, etc.).

CAUTION!

Do not open or close the rear paper exit while printing as it may

result in a paper jam.

Loading paper > 18

ULTI

PURPOSE

TRAY

1. Open the multi purpose tray (a).

2. Fold out the paper supports (b).

3. Press gently down on the paper platform (c) to ensure it is latched down.

4. Load the paper and adjust the paper guides (d) to the size of paper being used.

> For single-sided printing on headed paper load the paper into the multi purpose

tray with pre-printed side up and top edge into the printer.

> Transparency and transfer media should be loaded face up into the printer.

> Do not exceed the plain paper capacity of about 100 sheets. Maximum stacking

depth is 10mm.

5. Press the tray latch button inwards to release the paper platform, so that the paper

is lifted and gripped in place.

6. Set the correct paper size for the multi purpose tray in the Media Menu. (See “Menu

functions” on page 42.)

How to access the driver screens > 19

ACCESS

THE

DRIVER

SCREENS

Most of the features described are accessed via the printer driver screens. How you access

them depends on your computer and its operating system.

The driver windows are dialogue boxes offering a wide range of choices about how you want

to print your documents. Within Windows these dialogue boxes are tabbed, within Mac the

dialogue boxes use pop-up menus.

There are two ways to access the driver features from within Windows:

1. Directly from the Windows “Printers” folder (“Printers and Faxes” folder in

Windows XP and Vista, “Devices and Printers” folder in Windows 7).

If you choose this method any changes you make will become the driver defaults. This

means they will remain active for all your applications unless you specifically change

them from within the application’s Print dialogue.

2. From your application’s Print dialogue.

If you choose this method any changes you make will usually only last for as long as

the particular application is running, or until you change them again. In most cases,

once you quit the application the driver defaults will return.

NOTE

Example driver screenshots are used throughout this manual and as such may

not represent the driver screens for your machine. Some of the features

shown on the example screenshots may not be available on your machine.

NOTE

Settings made from the printer’s own control panel are the printer defaults.

They determine how your printer will behave unless you specify otherwise

from your computer.

The driver defaults override the printer defaults.

Application Print settings override both the printer defaults and the driver

defaults.

How to access the driver screens > 20

RINTING

PREFERENCES

INDOWS

APPLICATIONS

When you choose to print your document from a Windows

application program a print dialogue box appears. This

dialogue usually specifies the name of the printer on

which you will print your document. Next to the printer

name is a Properties button.

When you click Properties a new window opens which

contains a short list of the printer settings available in the

driver, which you can choose for this document.

The window which opens when you click Properties

depends on which printer driver has been installed.

OSTSCRIPT

EMULATION

1. Page orientation sets portrait (tall) or landscape

(wide) page orientation. The “rotated” rotates the

paper through 90 degrees anticlockwise.

2. Pages can be printed in forward or reverse order. If

using the face down (top) paper stacker, forward

order is usually appropriate to ensure that pages are

stacked in numerical order. If using the face up

(rear) paper stacker, reverse order would normally

stack your pages in numerical order.

3. You can specify how many pages to print on a sheet.

Pages will be scaled to fit the number you choose.

4. Advanced options are also available, such as how to download TrueType fonts, and

whether advanced options such as booklet printing are available.

The printer driver contains extensive on-line help for these items to help you make the

most appropriate choices.

Page is loading ...

OKI C711WT User guide

Brand: OKI

Model: C711WT

Category: Laser/LED printers

Type: User guide

Download PDF

report

OKI C711WT User guide

OKI C711WT User guide

Related papers

Other documents